Extra Data: Compatible with 1/2-in pipe, Corrosion resistant, Plastic construction, Suitable for use with PEX pipe
Description: The SharkBite 1/2-in plastic bend support is the best option for supporting and keeping PEX tubing in place. The plastic bend supports are a great option when lower material cost is desired. The PEX pipe plastic bend supports are also available in 3/4 inch
Extra Data: Approved for NSF/ANSI 62, ASTM F877-2011a and CSA B137.5-2009, Made in USA, Minimum working temperature 33 degrees F at 160 psi, Strong, flexible, corrosion/freeze-resistant pipe designed for hot or cold plumbing applications
Bullet5: Maximum working temperature 200 degrees F at 80 psi
Bullet6: Maximum working pressure is 160 PSI at 33 degrees F - 70 degrees F (see spec sheet for more detail)
Description: SharkBite PEX-B is a cross-linked polyethylene tubing designed for use in residential and commercial plumbing applications. PEX pipe is flexible and easy to work with, which reduces the number of fittings needed to complete a job; reducing cost and leak po
Extra Data: Approved for NSF/ANSI 62, ASTM F877-2011a and CSA B137.5-2009, Made in USA, Minimum working temperature 33 degrees F at 160 psi, Strong, flexible, corrosion/freeze-resistant pipe designed for hot or cold plumbing applications
Bullet5: Maximum working temperature 200 degrees F at 80 psi
Bullet6: Maximum working pressure is 160 PSI at 33 degrees F - 70 degrees F (see spec sheet for more detail)
Description: SharkBite PEX-B is a cross-linked polyethylene tubing designed for use in residential and commercial plumbing applications. PEX pipe is flexible and easy to work with, which reduces the number of fittings needed to complete a job; reducing cost and leak po
Extra Data: Approved for NSF/ANSI 62, ASTM F877-2011a and CSA B137.5-2009, Made in USA, Minimum working temperature 33 degrees F at 160 psi, Strong, flexible, corrosion/freeze-resistant pipe designed for hot or cold plumbing applications
Bullet5: Maximum working temperature 200 degrees F at 80 psi
Bullet6: Maximum working pressure is 160 PSI at 33 degrees F - 70 degrees F (see spec sheet for more detail)
Description: SharkBite PEX-B is a cross-linked polyethylene tubing designed for use in residential and commercial plumbing applications. PEX pipe is flexible and easy to work with, which reduces the number of fittings needed to complete a job; reducing cost and leak po
Extra Data: 1-1/2-in ID, 50 crimp rings included, Compatible with PEX piping (not included), Copper construction
Description: These 1-1/2-in copper crimp rings (50-Pack) are for ideal use with PEX piping (not included). These rings are made from copper for durability and have a 1-1/2-in I.D.
Extra Data: 1/2-in PEX Crimp x 1/2-in PEX Crimp, Compatible with PEX pipe, Lead free DZR brass construction, No flames, glue, fluxes, or solvents needed
Bullet5: Fittings work with copper crimp ring or stainless steel clamp connection methods
Bullet6: Cost effective, easy to install plumbing connection system
Description: The SharkBite PEX barb fitting is an easy to install, low cost solution to connect PEX tubing. SharkBite PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These PEX fittings may be used with the stainless st
Extra Data: 3/4-in PEX Crimp x 3/4-in PEX Crimp, Compatible with PEX pipe, Lead free DZR brass construction, No flames, glue, fluxes, or solvents needed
Bullet5: Fittings work with copper crimp ring or stainless steel clamp connection methods
Bullet6: Cost effective, easy to install plumbing connection system
Description: The SharkBite PEX barb fitting is an easy to install, low cost solution to connect PEX tubing. SharkBite PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These PEX fittings may be used with the stainless st
Extra Data: Approved for NSF/ANSI 62, ASTM F877-2011a and CSA B137.5-2009, Made in USA, Minimum working temperature 33 degrees F at 160 psi, Strong, flexible, corrosion/freeze-resistant pipe designed for hot or cold plumbing applications
Bullet5: Maximum working temperature 200 degrees F at 80 psi
Bullet6: Maximum working pressure is 160 PSI at 33 degrees F - 70 degrees F (see spec sheet for more detail)
Description: SharkBite PEX-B is a cross-linked polyethylene tubing designed for use in residential and commercial plumbing applications. PEX pipe is flexible and easy to work with, which reduces the number of fittings needed to complete a job; reducing cost and leak po
Extra Data: Available in 1/2 In., 3/4 In., and 1 In., Disconnect clips allow for quick un-install if mistake is made, Easy removal tool, Reusable
Bullet5: Compact, robust DZR brass body
Description: The SharkBite push-fit fittings are the fastest, easiest way to join copper, CPVC, or PEX tubing in any combination. Each fitting increases ease of use while decreasing the time and effort needed to connect water distribution pipe. There is no glue, solder
Extra Data: Disassembly is fast and easy using the disconnect clip, Lightweight and durable plastic construction, Use to mark proper safe seal insertion depth on pipe for SharkBite fittings, Will release the white collar of a SharkBite iron pipe size fitting on Sch. 40, 80, 120 PVC and Sch. 40 and Sch. 80 CPVC
Description: The SharkBite PVC IPS (Iron Pipe Size) Disconnect Clip can be used the release a SharkBite PVC IPS Fitting from Sch. 40, 80, 120 PVC Pipe. The PVC Disconnect Clip will release the fitting on the White Collar of the fitting. The PVC Disconnect Clip also ser
Extra Data: Fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination, Fittings certified to 200 PSI and 200 degrees F (93 degrees C), Instant push-fit connection for increased ease-of-use, No soldering, clamps, unions, or glue required
Description: SharkBite is the push-fit connection system thats really taking hold. It''s the easiest way to join copper, CPVC or PEX pipe in any combination - with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite dow
Extra Data: Available in 1/2 In., 3/4 In., and 1 In., Disconnect clips allow for quick un-install if mistake is made, Easy removal tool, Reusable
Bullet5: Design certified and agency listed
Bullet6: Compact, robust DZR brass body
Description: The SharkBite push-fit fittings are the fastest, easiest way to join copper, CPVC, or PEX tubing in any combination. Each fitting increases ease of use while decreasing the time and effort needed to connect water distribution pipe. There is no glue, solder
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site