Extra Data: Certified to 200 PSI and 200 degrees F, Gauge can be installed as a reusable or permanent device, Push-to-connect fittings require no solder, glue, unions, or tools, Use to connect copper, PEX and CTS CPVC pipes in any combination
Bullet5: 1/2-in push to connect
Description: The SharkBite pressure gauges offer quick push-fit installation in copper, CTS CPVC and PEX water distribution systems. The SharkBite pressure gauge may be installed temporarily and reused or as a permanent device. The SharkBite pressure gauges are used to
Extra Data: 100-Pack, Copper construction for durability, Use with brass or plastic PEX crimp fittings
Description: These 3/4-in copper crimp rings (25-Pack) are for ideal use with PEX piping (not included). These rings are made from copper for durability and have a 3/4-in I.D.
Extra Data: Innovative push-to-connect design makes for quick and easy installation, Lead free DZR brass construction for durability and reliability, Push-to-connect fittings require no solder, glue, unions or tools, Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
Description: The 1-in SharkBite push-to-connect ball valve with drain is the easiest way to install a new or replacement shut-off ball valve. The single lever control allows for easy operation and the valve is perfect for potable water and hydronic applications where a
Extra Data: Certified as a manufactured joint and for underground and behind-the-wall applications without access panels, Fitting can be rotated on pipe after installation making it easier to work in tight spaces, Lead free DZR brass construction for durability and reliability, Use to connect to any combination of copper or CPVC pipes
Bullet5: Meets the Mandatory 2014 U.S. Safe Drinking Water Act For Low Lead Content
Description: The SharkBite slip ball valve is an innovative valve that allows you to make a quick repair or add in ball valve to rigid copper or CPVC pipe. The slip ball valve allows up to 2 in. of pipe to be removed allowing for easy installation where rigid pipes do
Extra Data: Approved for NSF/ANSI 62, ASTM F877-2011a and CSA B137.5-2009, Made in USA, Minimum working temperature 33 degrees F at 160 psi, Strong, flexible, corrosion/freeze-resistant pipe designed for hot or cold plumbing applications
Bullet5: Maximum working temperature 200 degrees F at 80 psi
Bullet6: Maximum working pressure is 160 PSI at 33 degrees F - 70 degrees F (see spec sheet for more detail)
Description: SharkBite PEX-B is a cross-linked polyethylene tubing designed for use in residential and commercial plumbing applications. PEX pipe is flexible and easy to work with, which reduces the number of fittings needed to complete a job; reducing cost and leak po
Extra Data: 3/4-in push-to-connect inlet/outlet x 1/2-in push-to-connect 3 port open end, Innovative push-to-connect design makes for quick and easy installation, Lead free DZR brass construction for durability and reliability, Push-to-connect inlet compatible with PEX, copper, CPVC or PE-RT
Bullet5: Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
Description: The SharkBite 3/4-in push-to-connect inlet/outlet x 1/2-in push-to-connect 3 port open end manifold serves as a central distribution fitting with outlet ports to supply multiple water lines. They eliminate extra connections and are particularly useful in a
Extra Data: Approved for NSF/ANSI 62, ASTM F877-2011a and CSA B137.5-2009, Made in USA, Minimum working temperature 33 degrees F at 160 psi, Strong, flexible, corrosion/freeze-resistant pipe designed for hot or cold plumbing applications
Bullet5: Maximum working temperature 200 degrees F at 80 psi
Bullet6: Maximum working pressure is 160 PSI at 33 degrees F - 70 degrees F (see spec sheet for more detail)
Description: SharkBite PEX-B is a cross-linked polyethylene tubing designed for use in residential and commercial plumbing applications. PEX pipe is flexible and easy to work with, which reduces the number of fittings needed to complete a job; reducing cost and leak po
Extra Data: Approved for NSF/ANSI 62, ASTM F877-2011a and CSA B137.5-2009, Made in USA, Minimum working temperature 33 degrees F at 160 psi, Strong, flexible, corrosion/freeze-resistant pipe designed for hot or cold plumbing applications
Bullet5: Maximum working temperature 200 degrees F at 80 psi
Bullet6: Maximum working pressure is 160 PSI at 33 degrees F - 70 degrees F (see spec sheet for more detail)
Description: SharkBite PEX-B is a cross-linked polyethylene tubing designed for use in residential and commercial plumbing applications. PEX pipe is flexible and easy to work with, which reduces the number of fittings needed to complete a job; reducing cost and leak po
Extra Data: 3/4-in push-to-connect inlet x 1/2-in push-to-connect 3 port closed end, Innovative push-to-connect design makes for quick and easy installation, Lead free DZR brass construction for durability and reliability, Push-to-connect inlet compatible with PEX, copper, CPVC or PE-RT
Bullet5: Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
Description: The SharkBite 3/4-in push-to-connect inlet x 1/2-in push-to-connect 3 port closed end manifold serves as a central distribution fitting with outlet ports to supply multiple water lines. They eliminate extra connections and are particularly useful in areas
Extra Data: Approved for NSF/ANSI 62, ASTM F877-2011a and CSA B137.5-2009, Made in USA, Minimum working temperature 33 degrees F at 160 psi, Strong, flexible, corrosion/freeze-resistant pipe designed for hot or cold plumbing applications
Bullet5: Maximum working temperature 200 degrees F at 80 psi
Bullet6: Maximum working pressure is 160 PSI at 33 degrees F - 70 degrees F (see spec sheet for more detail)
Description: SharkBite PEX-B is a cross-linked polyethylene tubing designed for use in residential and commercial plumbing applications. PEX pipe is flexible and easy to work with, which reduces the number of fittings needed to complete a job; reducing cost and leak po
Extra Data: Approved for NSF/ANSI 62, ASTM F877-2011a and CSA B137.5-2009, Made in USA, Minimum working temperature 33 degrees F at 160 psi, Strong, flexible, corrosion/freeze-resistant pipe designed for hot or cold plumbing applications
Bullet5: Maximum working temperature 200 degrees F at 80 psi
Bullet6: Maximum working pressure is 160 PSI at 33 degrees F - 70 degrees F (see spec sheet for more detail)
Description: SharkBite PEX-B is a cross-linked polyethylene tubing designed for use in residential and commercial plumbing applications. PEX pipe is flexible and easy to work with, which reduces the number of fittings needed to complete a job; reducing cost and leak po
Extra Data: Approved for NSF/ANSI 62, ASTM F877-2011a and CSA B137.5-2009, Made in USA, Minimum working temperature 33 degrees F at 160 psi, Strong, flexible, corrosion/freeze-resistant pipe designed for hot or cold plumbing applications
Bullet5: Maximum working temperature 200 degrees F at 80 psi
Bullet6: Maximum working pressure is 160 PSI at 33 degrees F - 70 degrees F (see spec sheet for more detail)
Description: SharkBite PEX-B is a cross-linked polyethylene tubing designed for use in residential and commercial plumbing applications. PEX pipe is flexible and easy to work with, which reduces the number of fittings needed to complete a job; reducing cost and leak po
Extra Data: Compatible with copper, CPVC, PEX, PE-RT and HDPE pipes, Lead free DZR brass, No tools, soldering, clamps, unions or glue needed, Rated to 200 degrees F and 200 PSI
Bullet5: Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
Bullet6: Meets all UPC, IPC and cUPC requirements
Description: SharkBite large diameter fittings are available in 1-1/4-in, 1-1/2-in and 2-in sizes. These fittings are compatible with copper, CPVC, PEX, PE-RT, and HDPE pipe in any combination. Just insert the pipe, and stainless steel teeth bite down and grip tight, w
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site