Item Description
Polycarbonate securing brackets secure Blox directly to roof membrane. Securing brackets will protect against movement caused by wind and water and snow loads.
Item ID: 405WX6W
Width:
Height:
Extra Data: Brackets secure Blox directly to the roof, Molded of UV resistant polypropylene, Recommended on all metal and smooth membrane roofing applications, Use for high wind, water, or snow load locations
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Item Description
Furnish and install Solar Collar as noted below. Unit shall be Water-Tite item number listed below as manufactured by IPS Corporation.
Item ID: 405WY5Z
Width:
Height:
Finish: Molded
Extra Data: Commercial And Residential: Water-Tight Seal For Solar Mounting System, Limited Lifetime Warranty For The Life Of The Current Roof System, RCS1 Solar Collar Is New And Improved With A Tapered Neck And Internal Ribs For A Water-Tight Seal, Requires No Mastic, Caulking Or Taping - Mess Free
Bullet5: Fits 7/8' to 1' Mounting Legs or Vent Pipe
Item Description
Furnish and install roof vent flashing with 24 gauge galvanized steel base, fitted with elastomer collar. Unit shall be Water-Tite item number checked below as manufactured by IPS Corporation, as per corresponding dimensional characteristics, or equivalent.
Item ID: 405WY54
Width:
Height:
Finish: Galvanized Steel
Extra Data: 24 Gauge Galvanized Base With Elastomer Collar, Approved For Type 'B'Installations, Fits Any Roof Pitch To 45, Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet5: Elastomer Collar Heat Tested To 180F
Bullet6: Limited Lifetime Warranty For The Life Of The Current Roof System
Finish Family: Steel
Height: 2.25
Length: 18
Minimum Order Quantity: 15
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Item Description
Roof Top Blox are the solution for piping and equipment support on any flat commercial roof surface. The Roof Top Blox system is designed for quick installation on a multitude of applications.
Item ID: 405WX6P
Width:
Height:
Extra Data: Heavy-duty load-bearing design, Molded of UV resistant polypropylene, Notched saddle-top design for easy pipe alignment, Protective padded base
Extra Data: .063 Gauge Aluminum, 20-Year Warranty, Constructed Of Heavy Spun Aluminum, Designed To Withstand Extended Pressure And Air Moisture Trapped Within The Roofing System, For The Purpose Of Allowing Pressure (Air Moisture) To Escape
Item Description
Furnish and install roof vent flashing with 25 mil. aluminum base, fitted with elastomer collar. Unit shall be Water-Tite item number checked below as manufactured by IPS Corporation, as per corresponding dimensional characteristics, or equivalent.
Item ID: 405WY5K
Width:
Height:
Finish: Aluminum
Extra Data: 25 Mil. Aluminum Base With Elastomer Collar, Approved For Type 'B'Installations, Fits Any Roof Pitch To 45, Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet5: Elastomer Collar Heat Tested To 180F
Bullet6: Limited Lifetime Warranty For The Life Of The Current Roof System
Finish Family: Silver
Height: 2.13
Length: 16
Minimum Order Quantity: 20
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Item Description
Furnish and install roof vent flashing with 24 gauge galvanized steel base, fitted with elastomer collar. Unit shall be Water-Tite item number checked below as manufactured by IPS Corporation, as per corresponding dimensional characteristics, or equivalent.
Item ID: 405WY53
Width:
Height:
Finish: Galvanized Steel
Extra Data: 24 Gauge Galvanized Base With Elastomer Collar, Approved For Type 'B'Installations, Fits Any Roof Pitch To 45, Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet5: Elastomer Collar Heat Tested To 180F
Bullet6: Limited Lifetime Warranty For The Life Of The Current Roof System
Finish Family: Steel
Height: 2.63
Length: 12.5
Minimum Order Quantity: 20
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Extra Data: Adjustable from 1 1/4' - 3'', 6 1/4' Base Diameter, Flexible, Corrosion Resistant Aluminum Base Ring Conforms To Any Roof Panel Configuration, Made Of Long Life, Flexible, Weatherproof Epdm Rubber, One Piece Construction For Easy Installation
Bullet5: UV And Ozone Resistant Epdm Rubber Won't Crack
Bullet6: Clearly Marked Pipe Diameters Assure A Tight Accurate Fit
Bullet7: Pleated Cone Adusts To Any Roof Pitch
Bullet8: Continuous Service Temperature Range Of -65F To 250F
Extra Data: Designed To Fit All Metal Coned Roof Jacks/Flashings, Low Profile Size, Manufactured Using A Special Epdm Material With Uv Inhibitor, Requires No Mastic, Caulking Or Taping For A Total Water Proof Seal
Extra Data: Clamp fittings adjustable for all standard sizes, Durable aluminum construction, Non-clogging positive draft design, Recommended for flue, hot stack, or B-Vent installations
Item Description
The 360™ Roof Vent is an innovative static roof vent engineered to out-perform the standard slant-back vent. The 360™ Roof Vent is designed to pull air from the attic with no obstructions or redirections.
Item ID: 405WX6Z
Width:
Height:
Finish: Brown
Extra Data: 50 square inches of NFA, 8" opening for replacement of slant-back vents, All-aluminum construction will not rust, Limited Lifetime Warranty For The Life Of The Current Roof System
AltImageName1: /IPR/360BROWN2.jpg
AltImageName2: /IPR/360BROWN3.jpg
AltImageName3: /IPR/360BROWN4.jpg
AltImagePath1: /IPR-360BROWN2.JPEG
AltImagePath2: /IPR-360BROWN3.JPEG
AltImagePath3: /IPR-360BROWN4.JPEG
Bullet5: Heavier gauge flange than competitors
Bullet6: Innovative round design provides better pull and flow from the attic
Finish Family: Brown
Height: 5
Length: 13
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Item Description
Furnish and install roof vent flashing with 24 gauge galvanized steel base, fitted with elastomer collar. Unit shall be Water-Tite item number checked below as manufactured by IPS Corporation, as per corresponding dimensional characteristics, or equivalent.
Item ID: 405WY57
Width:
Height:
Finish: Galvanized Steel
Extra Data: 24 Gauge Galvanized Base With Elastomer Collar, Approved For Type 'B'Installations, Fits Any Roof Pitch To 45, Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet5: Elastomer Collar Heat Tested To 180F
Bullet6: Limited Lifetime Warranty For The Life Of The Current Roof System
Finish Family: Steel
Height: 2.13
Length: 18
Minimum Order Quantity: 15
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Extra Data: .063 Gauge Aluminum, Cap Has Been Engineered To Eliminate Any Possibility Of Backwash, Constructed Of A Heavy Gauge Spun Aluminum, Designed To Withstand Prolonged Exposure To The Toughest Elements Without Deterioration
Bullet5: Cannot Become Detached From The Main Stack, Protecting It From The Possibility Of Exposing Breather Holes To The Elements
Extra Data: Adjustable from 4 1/4' - 7 3/4', 10 3/4' Base Diameter, Flexible, Corrosion Resistant Aluminum Base Ring Conforms To Any Roof Panel Configuration, Made Of Long Life, Flexible, Weatherproof Epdm Rubber, One Piece Construction For Easy Installation
Bullet5: UV And Ozone Resistant Epdm Rubber Won't Crack
Bullet6: Clearly Marked Pipe Diameters Assure A Tight Accurate Fit
Bullet7: Pleated Cone Adusts To Any Roof Pitch
Bullet8: Continuous Service Temperature Range Of -65F To 250F
Extra Data: Can Be Used To Instantly Repair A Leak During A Wet Period, Until The Flashing Can Be Replaced At A Later Time, Can Be Used To Repair The Elastomer Sealing Collar On All Types Of Residential 'No Caulk'Roof Vent Flashings Quickly And Easily, Eliminates the need for a mastic or caulking type messy repair job, Large Size Covers The Entire Existing Elastomer Collar
Bullet5: Fully Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet6: Individual Sizes And Multi Size Models Available
Bullet7: Better Appearance Than A Mastic Repair Job
Extra Data: All Flexible, One-Piece Base And Collar, Fits any roof pitch to 45 (1 1/2' and 2' vent pipe allow for a pitch range beyond 45), Multi-Size 3 N 4 Fits 3' - 4' Vent Pipe, Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet5: Approved for Type 'B'installations
Bullet6: Elastomer collar heat tested to 180F
Bullet7: Limited Lifetime Warranty for the life of the current roof system
Finish Family: No Finish
Length: 14.75
Minimum Order Quantity: 20
Prop65: Cancer. For more information: https://www.P65warnings.ca.gov
Item Description
The 360 Double Louver™ is engineered for maximum airflow. The double louver design provides extra wind, weather, and critter protection while also using exterior wind to create suction. This innovative design creates more exhaust than similar size vents.
Item ID: 405WX72
Width:
Height:
Finish: Brown
Extra Data: 14" opening, 144 square inches of NFA, All-aluminum construction will not rust, Limited Lifetime Warranty For The Life Of The Current Roof System
AltImageName1: /IPR/DBL360BROWN2.jpg
AltImageName2: /IPR/DBL360BROWN3.jpg
AltImageName3: /IPR/DBL360BROWN4.jpg
AltImagePath1: /IPR-DBL360BROWN2.JPEG
AltImagePath2: /IPR-DBL360BROWN3.JPEG
AltImagePath3: /IPR-DBL360BROWN4.JPEG
Bullet5: Heavier gauge flange than competitors
Bullet6: Innovative round design provides better pull and flow from the attic
Finish Family: Brown
Height: 6
Length: 19
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Extra Data: Elastomer Collar Integrity Is Maintained, Eye Pleasing Matte Textured Factory Finishes, Stock Popular Colors Are Weathered Gray, Brown & Black (Custom Colors Available Upon Request With Adequate Lead Time), Weather Resistant
Bullet10: Custom Finish Metal Bases In Aluminum Or Galvanized
Item Description
Furnish and install roof vent flashing with 24 gauge galvanized steel base, fitted with adjustable, multi-size elastomer collar. Unit shall be Water-Tite item number checked below as manufactured by IPS Corporation, as per corresponding dimensional characteristics, or equivalent.
Item ID: 405WX7D
Width:
Height:
Finish: Galvanized Steel
Extra Data: 24-Gauge Galvanized Base, Fits any roof pitch to 45 (1 1/2' and 2' vent pipe allow for a pitch range beyond 45), Multi-Size 3 N 1® Flashing Fits 1 1/4' - 3' Vent Pipe, Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet5: Approved for Type 'B'installations
Bullet6: Elastomer collar heat tested to 180F
Bullet7: Limited Lifetime Warranty for the life of the current roof system
Finish Family: Steel
Height: 2.13
Length: 18
Minimum Order Quantity: 15
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site