Item Description
4'' IPS Plastic Spud with 6'' Nickel Bronze Round Strainer with Ring ABS

• Item ID: 90AYZ6F
• Width:
• Height:
• Description: 4'' IPS ABS Spud with 6'' Nickel Bronze Strainer with Ring
• Material: ABS
• Weight: 2.05
• Standard Plumbing Category: Parts

Item Description

• Item ID: 901EXET
• Width:
• Height:
• Extra Data: Beveled edge allows for recessed installation, Fits over 2 or inside 3 Schedule 40 DWV pipe, Low profile for first and second floor installations, Reversible clamping ring for additional 1/2'' height adjustment
• Bullet5: Brass inserts ensure secure clamping of membrane
• Bullet6: Dual weeps holes
• Bullet7: Recessed sump area for added drainage
• Bullet8: Replacement strainer - D60812
• Description: 4'' ABS Shower Drain/Floor Drain with Brass Tailpiece and Chrome Plated Square Strainer
• Height: 3.00
• Length: 6.50
• Material: ABS
• Weight: 1.40
• Width: 6.50
• Standard Plumbing Category: Parts

Item Description

• Item ID: 901U43N
• Width:
• Height:
• Extra Data: Lead Free
• Description: 3/4'' x 3'' Red Brass Pipe Nipple, Lead Free
• Height: 3.00
• Length: 0.70
• Material: Red Brass
• Weight: 0.50
• Width: 0.80
• Standard Plumbing Category: Parts

Item Description

• Item ID: 901LZR1
• Width:
• Height:
• Finish: Satin
• Extra Data: 18 gauge stainless steel, Meets 900 lb. downward pull when installed properly, Meets ANSI 117.1 and all ADA Code requirements, Meets federal specification WW-P-541/8B, Amendment 1, 16 April 1990
• Bullet5: Meets federal specifications for FHA, VA hospital, private construction
• Bullet6: Individually bagged with stainless steel mounting screws
• Description: 1-1/2'' x 42'' Satin Finish Grab Bar with Exposed Flange
• Height: 4.00
• Length: 46.00
• Material: Stainless Steel
• Weight: 3.00
• Width: 17.00
• Standard Plumbing Category: Parts

Item Description
Jones Stephens'' family of gas connectors are the professional''s choice for all your gas appliance hook-up needs. The flexible hoses are made of durable 304 stainless steel and end fittings are plated for high corrosion resistance. All Jones Stephens gas connectors have quality flared end fittings which create a metal to metal seal and are 100 percent leak tested to ensure safety and quality.

• Item ID: 90CCCLA
• Width:
• Height:
• Extra Data: 100 percent leak tested to ensure safety and quality, 24,900BTU (7,297)W, Durable corrugated 304 stainless steel with yellow anti-corrosion coating, Quality flared end fittings create a metal to metal seal
• Bullet5: Fittings are plated with a corrosion resistant coating
• Height: 0.80
• Length: 64''
• Material: Stainless Steel
• SafetyList: ANSI Z21.25-2015, CSA6.10-2015
• Weight: 0.98
• Width: 0.69
• Standard Plumbing Category: Other Accessories

Item Description

• Item ID: 901EXEL
• Width:
• Height:
• Extra Data: Beveled edge allows for recessed installation, Fits over 2 or inside 3 Schedule 40 DWV pipe, Low profile for first and second floor installations, Reversible clamping ring for additional 1/2'' height adjustment
• Bullet5: Brass inserts ensure secure clamping of membrane
• Bullet6: Dual weeps holes
• Bullet7: Recessed sump area for added drainage
• Bullet8: Replacement strainer - D60813
• Description: 4'' PVC Shower Drain/Floor Drain with Brass Tailpiece and Polished Brass Square Strainer
• Height: 14.20
• Length: 13.30
• Material: PVC
• Weight: 2.28
• Width: 13.40
• Standard Plumbing Category: Parts

Item Description

• Item ID: 901HY32
• Width:
• Height:
• Extra Data: For use with heavy duty floor drains
• Description: 3-1/2'' IPS Cast Iron Spud for Heavy Duty Drain Bodies with 6'' Nickel Bronze Round Strainer with Ring - 3'' Threaded Throat
• Material: Cast Iron
• Weight: 5.72
• Standard Plumbing Category: Parts

Item Description

• Item ID: 901EXEQ
• Width:
• Height:
• Extra Data: Beveled edge allows for recessed installation, Fits over 2 or inside 3 Schedule 40 DWV pipe, Low profile for first and second floor installations, Reversible clamping ring for additional 1/2'' height adjustment
• Bullet5: Brass inserts ensure secure clamping of membrane
• Bullet6: Dual weeps holes
• Bullet7: Recessed sump area for added drainage
• Bullet8: Replacement strainer - D60812
• Description: 4'' PVC Shower Drain/Floor Drain with Brass Tailpiece and Chrome Plated Square Strainer
• Material: PVC
• Weight: 2.09
• Standard Plumbing Category: Parts

Item Description

• Item ID: 901HY34
• Width:
• Height:
• Extra Data: For use with heavy duty floor drains
• Description: 4'' IPS Cast Iron Spud for Heavy Duty Drain Bodies with 6'' Nickel Bronze Round Strainer with Ring - 3-1/2'' Threaded Throat
• Material: Cast Iron
• Spec Sheet: Spec Sheet
• Weight: 5.70
• Standard Plumbing Category: Parts

Item Description
1-1/4'' x 24'' Ready Cut Pipe Black

• Item ID: 90ANU72
• Width:
• Height:
• Description: 1-1/4'' x 24'' Ready Cut Pipe Black
• Material: Steel
• Weight: 4.361
• Standard Plumbing Category: Parts

Item Description
2-1/2'' x 5-1/2'' Pipe Nipple Galvanized

• Item ID: 90M411Y
• Width:
• Height:
• Description: 2-1/2'' x 5-1/2'' Pipe Nipple Galvanized
• Material: Steel
• Weight: 2.542

Item Description
1/2'' Forged Brass Drop Tee

• Item ID: 90C21TF
• Width:
• Height:
• Extra Data: Lead Free
• Description: 1/2'' Forged Brass Drop Tee
• Material: Brass
• Weight: 0.138
• Standard Plumbing Category: Parts

Item Description
2-1/2'' x 6'' Pipe Nipple Galvanized

• Item ID: 90ANZ3L
• Width:
• Height:
• Description: 2-1/2'' x 6'' Pipe Nipple Galvanized
• Material: Steel
• Weight: 2.784
• Standard Plumbing Category: Parts

Item Description

• Item ID: 901M2N9
• Width:
• Height:
• Extra Data: ASTM A307 hex bolts and heavy hex nuts, Gaskets are 1/16'' thick, Meets ASTM D1330
• Description: 10'' Red Rubber Full Face Gasket Kit, 7/8'' x 3-3/4'' Bolt Size
• Height: 1.80
• Length: 15.30
• Material: Red Rubber
• Weight: 12.20
• Width: 14.10
• Standard Plumbing Category: Parts

Item Description

• Item ID: 901HX42
• Width:
• Height:
• Extra Data: Can be used with gasket to make unit no-caulk, Tongue and groove cast iron bolt down clamping ring, Weep holes on both top and bottom for secondary drainage
• Description: 2'' Inside Caulk Shower/Floor Drain with 6-1/2'' Pan and 4'' Polished Brass Cast Round Strainer
• Height: 6.80
• Length: 11.00
• Material: Cast Iron
• Spec Sheet: Spec Sheet
• Weight: 4.67
• Width: 11.50
• Standard Plumbing Category: Parts

Item Description

• Item ID: 901EYEP
• Width:
• Height:
• Extra Data: Allows adjustment to floor level after concrete is poured!, Includes the spacer ring that can be used with brass spuds, Industry standard iron pipe size threads compatible with most adapter and drain bodies, PVC, ABS or Cast Iron drains compatible
• Bullet5: Can be used with tile rings
• Description: 3-1/2'' PVC LevelBest Adapter with 3'' Metal Spud and 5'' Nickel Bronze Round Strainer
• Material: PVC
• Weight: 2.43
• Standard Plumbing Category: Parts

Item Description

• Item ID: 9017Y2P
• Width:
• Height:
• Extra Data: Adjustable, Covers are 3/16'' thick, Covers available in PB and NB, Supplied with 3'' IPS (3-1/2'' OD) countersunk plug
• Description: 3'' x 4'' ABS Pipe Fit Base Cleanout with 3-1/2'' Plastic Spud and 5'' Nickel Bronze Cover with Ring
• Material: ABS
• Weight: 1.83
• Standard Plumbing Category: Parts

Item Description

• Item ID: 901X0VW
• Width:
• Height:
• Finish: Satin Nickel
• Description: 1-1/2'' PVC Trip Lever Tubular Bath Waste Kit Satin Nickel 2 Holes
• Finish Family: Nickel Tones
• Height: 16.60
• Length: 12.30
• Material: PVC
• Spec Sheet: Spec Sheet
• Weight: 1.57
• Width: 21.40
• Standard Finish: Nickel
• Standard Plumbing Category: Parts

Item Description

• Item ID: 9017Y2K
• Width:
• Height:
• Extra Data: Adjustable (see dimension D), Covers are 3/16'' thick, Covers available in PB and NB, Supplied with 3'' IPS (3-1/2'' OD) countersunk plug
• Description: 3'' x 4'' PVC Pipe Fit Base Cleanout with 3-1/2'' Plastic Spud and 5'' Nickel Bronze Cover with Ring
• Height: 7.40
• Length: 7.40
• Material: PVC
• Weight: 2.40
• Width: 7.30
• Standard Plumbing Category: Parts

Item Description

• Item ID: 901X3RT
• Width:
• Height:
• Finish: Satin Nickel
• Extra Data: 1-1/2'' IPS threaded drain shoe, 2-hole face plates with wrap-around gaskets and tapped holes, Available chrome plated or satin nickel, Heavy walled PVC and ABS tubular
• Bullet5: Overflow elbow designed to accommodate B07-202 test kit
• Bullet6: Wing nuts and poly washers
• Bullet7: Come packaged in individual box
• Bullet8: UPC approved
• Description: 1-1/2'' ABS Trip Lever Tubular Bath Waste Kit Satin Nickel 2 Holes
• Finish Family: Nickel Tones
• Material: ABS
• Spec Sheet: Spec Sheet
• Weight: 0.28
• Standard Finish: Nickel
• Standard Plumbing Category: Parts

Item Description

• Item ID: 9017Y2H
• Width:
• Height:
• Extra Data: Adjustable (see dimension D), Covers are 3/16'' thick, Covers available in PB and NB, Supplied with 3'' IPS (3-1/2'' OD) countersunk plug
• Description: 3'' x 4'' PVC Pipe Fit Base Cleanout with 3-1/2'' Plastic Spud and 5'' Polished Brass Cover with Ring
• Height: 6.60
• Length: 6.20
• Material: PVC
• Weight: 1.97
• Width: 6.50
• Standard Plumbing Category: Parts

Item Description

• Item ID: 901HU5U
• Width:
• Height:
• Extra Data: PB, NB and CP strainers are 3/16'' thick, Primer tapped, includes 1/2'' plug, Stainless steel strainers are .06'' thick, Strainers are available in SS, PB, NB and CP
• Bullet5: Adjustable (see dimension D)
• Description: 4'' PVC Over Pipe Fit Drain Base with 4'' Plastic Spud and 6'' Chrome Plated Strainer with Ring
• Height: 6.30
• Length: 6.30
• Material: PVC
• Weight: 4.50
• Width: 6.50
• Standard Plumbing Category: Parts

Item Description

• Item ID: 901M2Q0
• Width:
• Height:
• Description: 6'' Asbestos-Free Ring Gasket Kits with Insulation Kit , 3/4'' x 3-1/4'' Bolt Size
• Material: Garlock 4401
• Weight: 0.50
• Standard Plumbing Category: Parts

Item Description
4'' Over Pipe Fit Drain Base with 4'' Plastic Spud 6'' Chrome Plated Strainer with Ring ABS

• Item ID: 90AYZ44
• Width:
• Height:
• Description: 4'' ABS Over Pipe Fit Drain Base with 4'' Plastic Spud and 6'' Chrome Plated Strainer with Ring
• Material: ABS
• Weight: 4.71
• Standard Plumbing Category: Parts