Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR51F
Width:
Height:
Extra Data: 200 psi non-shock cold working pressure to 250°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
AltImageName1: /NBC/MTPC1800.jpg
AltImageName2: /NBC/MTPC1800.jpg
AltImagePath1: /NBC-MTPC1800.JPEG
AltImagePath2: /NBC-MTPC1800.JPEG
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - MPT Body X Press Tailpiece
Length: 3.930
Made to Order: Yes
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR527
Width:
Height:
Extra Data: 200 psi non-shock cold working pressure to 250°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
AltImageName1: /NBC/PCT1800.jpg
AltImageName2: /NBC/PCT1800.jpg
AltImagePath1: /NBC-PCT1800.JPEG
AltImagePath2: /NBC-PCT1800.JPEG
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - Press Body x FPT Tailpiece
Length: 4.000
Made to Order: Yes
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8PX9
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Bullet7: Solder ends per ASME B16.22
Country: CN
Description: Union w/Test Port - Solder Ends
Height: 3.100
Length: 3.290
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR519
Width:
Height:
Extra Data: 200 psi non-shock cold working pressure to 250°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
AltImageName1: /NBC/MTPC1800.jpg
AltImageName2: /NBC/MTPC1800.jpg
AltImagePath1: /NBC-MTPC1800.JPEG
AltImagePath2: /NBC-MTPC1800.JPEG
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - MPT Body X Press Tailpiece
Length: 4.290
Made to Order: Yes
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR52D
Width:
Height:
Extra Data: 200 psi non-shock cold working pressure to 250°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
AltImageName1: /NBC/PCT1800.jpg
AltImageName2: /NBC/PCT1800.jpg
AltImagePath1: /NBC-PCT1800.JPEG
AltImagePath2: /NBC-PCT1800.JPEG
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - Press Body x FPT Tailpiece
Length: 4.000
Made to Order: Yes
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The Chemtrol® flush thread reducing bushing features a male pipe thread and a female pipe thread connection. Chemtrol® PVDF fittings are lightweight, easy to install and maintenance-free. Chemtrol® fittings connect piping lengths together with thermo-seal fusion joining, threading or flanging to create a highly reliable, leak-free system. Please refer to Chemtrol technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Chemtrol® Kynar® natural PVDF exhibits superior strength, working temperature and chemical resistance characteristics. Kynar® PVDF offers versatile chemical resistance to slats, strong acids, dilute bases and many organic solvents such as aromatics, aliphadics and chlorinated groups. PVDF is also ideally suited for handling wet or dry chlorine bromine and other halogens. Chemtrol® premium line of plastic fittings is backed by a 1-year limited warranty. Because Chemtrol® is a NIBCO brand the flow-control fittings are unsurpassed in quality, performance and longevity.
Item ID: 7073TWN
Width:
Height:
Finish: Natural
Extra Data: Do not use or test with compressed air or other gases, Male and female NPT thread connection, Maximum service temperature 280°F, Universal Part No. 4839
Bullet5: ASTM D3222 Type I material
Country: US
Disclaimer: Kynar pecent is a registered trademark of Arkema Inc.
Item Description
The Isolator is a uni-flange ball valve that isolates a circulator pump, allowing virtually no air into the system during pump replacement or service. Its innovative design combines multiple components into a single forged brass body that saves time, labor and space. The Isolator has revolutionized the installation of circulator pumps and has evolved into the largest flanged ball valve program in the industry today, featuring patented technology with further patents pending. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076ZF7
Width:
Height:
Extra Data: Easily Isolates the Pump for Replacement, Flange Features a Conical Inlet to Minimize Turbulence, Multi-Function Drain Makes the Isolator the Only Valve That Drains From Either Side of the Pump, Prevents Electrolysis and Eliminates Galvanic Corrosion
Bullet10: Ball valve with integral spring check saves labor, space, and leak paths
Bullet5: Fits Virtually Any Standard Circulator Pump
Bullet6: Kit Contains 1 Isolator and 1 Isolator With Drain, 2 Full-Faced Flange Gaskets, Bonus Wing Style "T" Handle, and 2 Sets of Nuts and Bolts
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The Isolator is a uni-flange ball valve that isolates a circulator pump, allowing virtually no air into the system during pump replacement or service. Its innovative design combines multiple components into a single forged brass body that saves time, labor and space. The Isolator has revolutionized the installation of circulator pumps and has evolved into the largest flanged ball valve program in the industry today, featuring patented technology with further patents pending. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076XGA
Width:
Height:
Extra Data: Easily Isolates the Pump for Replacement, Flange Features a Conical Inlet to Minimize Turbulence, Prevents Electrolysis and Eliminates Galvanic Corrosion, Rotating Flange is Secured by a Snug-Fit Snap-Ring that Provides Greater Control Over Positioning During Installation
Bullet10: Eliminates Leak Paths
Bullet5: Multi-Function Drain Makes the Isolator the Only Valve That Drains From Either Side of the Pump
Bullet6: Fits Virtually Any Standard Circulator Pump
Bullet7: Kit Contains 1 Isolator and 1 Isolator With Drain, 2 Full-Faced Flange Gaskets, Bonus Wing Style "T" Handle, and 2 Sets of Nuts and Bolts
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The Isolator is a uni-flange ball valve that isolates a circulator pump, allowing virtually no air into the system during pump replacement or service. Its innovative design combines multiple components into a single forged brass body that saves time, labor and space. The Isolator has revolutionized the installation of circulator pumps and has evolved into the largest flanged ball valve program in the industry today, featuring patented technology with further patents pending. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076WHJ
Width:
Height:
Extra Data: Easily Isolates the Pump for Replacement, Flange Features a Conical Inlet to Minimize Turbulence, Multi-Function Drain Makes the Isolator the Only Valve That Drains From Either Side of the Pump, Prevents Electrolysis and Eliminates Galvanic Corrosion
Bullet10: Ball valve with integral spring check saves labor, space, and leak paths
Bullet5: Fits Virtually Any Standard Circulator Pump
Bullet6: Kit Contains 1 Isolator and 1 Isolator With Drain, 2 Full-Faced Flange Gaskets, Bonus Wing Style "T" Handle, and 2 Sets of Nuts and Bolts
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The Isolator is a uni-flange ball valve that isolates a circulator pump, allowing virtually no air into the system during pump replacement or service. Its innovative design combines multiple components into a single forged brass body that saves time, labor and space. The Isolator has revolutionized the installation of circulator pumps and has evolved into the largest flanged ball valve program in the industry today, featuring patented technology with further patents pending. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079R90
Width:
Height:
Extra Data: Easily Isolates the Pump for Replacement, Flange Features a Conical Inlet to Minimize Turbulence, Prevents Electrolysis and Eliminates Galvanic Corrosion, Rotating Flange is Secured by a Snug-Fit Snap-Ring that Provides Greater Control Over Positioning During Installation
Bullet10: Eliminates Leak Paths
Bullet5: Multi-Function Drain Makes the Isolator the Only Valve That Drains From Either Side of the Pump
Bullet6: Fits Virtually Any Standard Circulator Pump
Bullet7: Kit Contains 1 Isolator and 1 Isolator With Drain, 2 Full-Faced Flange Gaskets, Bonus Wing Style "T" Handle, and 2 Sets of Nuts and Bolts
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The 90-degree elbow features solder cups and a long turn radius. The fitting provides a means of changing the pipeline direction 90 degrees. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706UQV1
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Bullet8: UL 207 Recognized to 700 PSI (select diameters)
Country: US
Description: 90 Deg Elbow Long Radius C x C - Wrot
Item Description
The Isolator is a uni-flange ball valve that isolates a circulator pump, allowing virtually no air into the system during pump replacement or service. Its innovative design combines multiple components into a single forged brass body that saves time, labor and space. The Isolator has revolutionized the installation of circulator pumps and has evolved into the largest flanged ball valve program in the industry today, featuring patented technology with further patents pending. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076ZF6
Width:
Height:
Extra Data: Easily Isolates the Pump for Replacement, Flange Features a Conical Inlet to Minimize Turbulence, Multi-Function Drain Makes the Isolator the Only Valve That Drains From Either Side of the Pump, Prevents Electrolysis and Eliminates Galvanic Corrosion
Bullet10: Ball valve with integral spring check saves labor, space, and leak paths
Bullet5: Fits Virtually Any Standard Circulator Pump
Bullet6: Kit Contains 1 Isolator and 1 Isolator With Drain, 2 Full-Faced Flange Gaskets, Bonus Wing Style "T" Handle, and 2 Sets of Nuts and Bolts
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The Isolator is a uni-flange ball valve that isolates a circulator pump, allowing virtually no air into the system during pump replacement or service. Its innovative design combines multiple components into a single forged brass body that saves time, labor and space. The Isolator has revolutionized the installation of circulator pumps and has evolved into the largest flanged ball valve program in the industry today, featuring patented technology with further patents pending. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076XG9
Width:
Height:
Extra Data: Easily Isolates the Pump for Replacement, Flange Features a Conical Inlet to Minimize Turbulence, Prevents Electrolysis and Eliminates Galvanic Corrosion, Rotating Flange is Secured by a Snug-Fit Snap-Ring that Provides Greater Control Over Positioning During Installation
Bullet10: Eliminates Leak Paths
Bullet5: Multi-Function Drain Makes the Isolator the Only Valve That Drains From Either Side of the Pump
Bullet6: Fits Virtually Any Standard Circulator Pump
Bullet7: Kit Contains 1 Isolator and 1 Isolator With Drain, 2 Full-Faced Flange Gaskets, Bonus Wing Style "T" Handle, and 2 Sets of Nuts and Bolts
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The Isolator is a uni-flange ball valve that isolates a circulator pump, allowing virtually no air into the system during pump replacement or service. Its innovative design combines multiple components into a single forged brass body that saves time, labor and space. The Isolator has revolutionized the installation of circulator pumps and has evolved into the largest flanged ball valve program in the industry today, featuring patented technology with further patents pending. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079R8Z
Width:
Height:
Extra Data: Easily Isolates the Pump for Replacement, Flange Features a Conical Inlet to Minimize Turbulence, Prevents Electrolysis and Eliminates Galvanic Corrosion, Rotating Flange is Secured by a Snug-Fit Snap-Ring that Provides Greater Control Over Positioning During Installation
Bullet10: Eliminates Leak Paths
Bullet5: Multi-Function Drain Makes the Isolator the Only Valve That Drains From Either Side of the Pump
Bullet6: Fits Virtually Any Standard Circulator Pump
Bullet7: Kit Contains 1 Isolator and 1 Isolator With Drain, 2 Full-Faced Flange Gaskets, Bonus Wing Style "T" Handle, and 2 Sets of Nuts and Bolts
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO® Press System® fittings are designed to join with seamless copper water tube in residential and commercial potable, hot, chilled and process water applications for plumbing and HVAC systems. The press fittings can also be installed underground. The NIBCO® Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO® Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® Press System® copper fittings are backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706ULWT
Width:
Height:
Extra Data: Dezincification resistant, Lead-free*, Operating pressure 200 psi cwp, Temperature range -20°F to 250°F
AltImageName1: /NBC/PC601.jpg
AltImageName2: /NBC/PC601.jpg
AltImagePath1: /NBC-PC601.JPEG
AltImagePath2: /NBC-PC601.JPEG
Bullet5: ASTM B75 Alloy C12200 Copper
Bullet6: Complies with ASME B16/51 Performance
Bullet7: Third party certified to UPC
Bullet8: Third party certified to the performance requirements of CSA MSE 13 and PS-117
Item Description
NIBCO® Press System® fittings are the fastest, easiest way to join copper tubing systems in residential and commercial potable, hot, chilled and process water applications for plumbing and HVAC systems. The press fittings can also be installed underground. The NIBCO® Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO® Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® Press System® copper fittings are backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 70TTYGX
Width:
Height:
Extra Data: Dezincification resistant, Lead-free*, Operating pressure 200 psi cwp, Temperature range -20°F to 250°F
Bullet5: ASTM B75 Alloy C12200 Copper
Bullet6: NSF/ANSI/CAN-61
Bullet7: Third party certified to UPC
Bullet8: Third party certified to the performance requirements of CSA MSE 13 and PS-117
Item Description
The ABS DWV P-Trap features a hub x hub x cleanout with plug connection to provide a means for clearing potential clogs. The DWV p-trap provides a water seal so that wastewater will automatically be trapped in the arc of the configuration, thereby preventing unwanted gases from entering the household environment. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707DTZ9
Width:
Height:
Finish: Black
Extra Data: ASTM D2665, CSA B181.1, Do not test or use with compressed air or other gases, Service temperature -40°F to 180°F
Bullet5: ASTM D3965
Bullet6: ASTM D2661 and D3311
Bullet7: UL Listed 94V-0
Bullet8: NSF/ANSI Standard 14
Bullet9: NSF U.P. Certified
Country: US
Description: P-Trap Hub x Hub x Cleanout with Plug - ABS DWV
Disclaimer: Do not use or test with compressed air or other gasses.
Finish Family: Black
Height: 2.260
Length: 7.120
Low Lead: Yes
MadeInUSA: Yes
Material: Acrylonitrile Butadiene Styrene
Minimum Order Quantity: 50
Prop65: This product can expose you to Styrene, a chemical known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.
Extra Data: Full port, Silicon Performance Bronze® body, Stainless steel ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Lead-free
Bullet5: Blowout-proof stem
Bullet6: NIBCO® HydraPure® lead-free markings on handle and body
Bullet7: Standard lever handle; other handle options available
Bullet8: Solder end connections
Bullet9: Dezincification resistant
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineer
Height: 2.620
Length: 4.62
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO® Press System® fittings are designed to join with seamless copper water tube in residential and commercial potable, hot, chilled and process water applications for plumbing and HVAC systems. The press fittings can also be installed underground. The NIBCO® Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO® Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® Press System® copper fittings are backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706UJX9
Width:
Height:
Extra Data: Dezincification resistant, Lead-free*, Operating pressure 200 psi cwp, Temperature range -20°F to 250°F
Bullet5: ASTM B75 Alloy C12200 Copper
Bullet6: Complies with ASME B16/51 Performance
Bullet7: Third party certified to UPC
Bullet8: Third party certified to the performance requirements of CSA MSE 13 and PS-117
Country: US
Description: Reducing Coupling P x P - Wrot Copper
Item Description
NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO® Press System® fittings are designed to join with seamless copper water tube in residential and commercial potable, hot, chilled and process water applications for plumbing and HVAC systems. The press fittings can also be installed underground. The NIBCO® Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO® Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® Press System® copper fittings are backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706UJXD
Width:
Height:
Extra Data: Dezincification resistant, Lead-free*, Operating pressure 200 psi cwp, Temperature range -20°F to 250°F
Bullet5: ASTM B75 Alloy C12200 Copper
Bullet6: Complies with ASME B16/51 Performance
Bullet7: Third party certified to UPC
Bullet8: Third party certified to the performance requirements of CSA MSE 13 and PS-117
Country: US
Description: Reducing Coupling P x P - Wrot Copper
Extra Data: Full port, Silicon Performance Bronze® body, Stainless steel ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Lead-free
Bullet5: Threaded end connections
Bullet6: Blowout-proof stem
Bullet7: Standard lever handle; other handle options available
Bullet8: NIBCO® HydraPure® lead-free markings on handle and body
Bullet9: Dezincification resistant
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engine
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Webstone''''s lead free ProPush line is one of the most complete and versatile lines in the industry. The easy push-on connections may be used with Copper, CPVC, or PEX. Designed for use with water in residential or commercial plumbing systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076UJZ
Width:
Height:
Extra Data: Easy Push-On Connections to Copper, CPVC, or PEX Feature a Fully Removable/Replaceable Grip Assembly, Joins Two Pipes or Tubes With Quick, Clean, Easy ProPush Connections, No Costly Tools or Clean-Up, No Need for Solder, Glue, or Clamps
Bullet5: Easily Recover from Installation and Deburring Mishaps
Bullet6: Models available to satisfy all state and federal low-lead laws
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The PVC DWV 90-degree street elbow features a spigot x hub connection and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707DVW2
Width:
Height:
Finish: White
Extra Data: ASTM D2665 and D3311, Do not test or use with compressed air or other gases, Maximum service temperature 140°F, NSF/ANSI Standard 14
Bullet5: UL Listed 94V-0
Bullet6: NSF U.P. Certified
Country: US
Description: 90 degrees Street Elbow Spg x H - PVC DWV
Extra Data: Heavy Duty Forged Brass Construction, Integral Check Valve on Inlet, Mixes Hot and Cold Water to Pre-Set Output Temperature, Temperature Locking Handle on Select Models
Bullet10: Certified to NSF/ANSI 61 And 372
Bullet5: Compatible With G1 Fittings
Bullet6: Replacement Checks Also Available
Bullet7: Models available to satisfy all state and federal low-lead laws
Bullet8: Available in PEX, MIP, SWT, PRS, PSH, FIP, GMT
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site