Item Description
The NIBCO® Press System is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. The two-piece valve is recommended for many applications, including HVAC, hot and cold water, and non-potable process water. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO® Press System features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. NIBCO® Press System valves are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707KY86
Width:
Height:
Extra Data: Bronze trim blowout-proof stem, Full port, Maximum service temperature 250°F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet5: Reinforced PTFE seat rings
Bullet6: Threaded x press female end connections
Bullet7: Press leak-detection feature
Bullet8: Lever handle
Bullet9: Dezincification resistant
Country: US
Description: Ball Valve - Bronze, 250 PSI, Full Port, Thread x Press Ends
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC.
Height: 1.700
Length: 6.500
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8UTC
Width:
Height:
Extra Data: Full port, Max temperature rating 300°F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Solder end connections
Bullet5: Stainless steel ball and stem
Bullet6: Vented ball
Bullet7: Blowout-proof stem
Bullet8: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet9: NIBCO® HydraPure® lead-free* markings on handle and body
Disclaimer: Performance Bronze is a registered trademark of NIBCO INC. NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 0.960
Length: 4.860
MadeInUSA: Yes
Material: Lead-Free Bronze
Minimum Order Quantity: 10
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The PVC DWV closet flange features a knockout test plug and a hub connection. The closet flange is secured to the floor of the dwelling so that a toilet can be affixed to it and allow for a pipe connection (under the floor) to continue the piping for evacuation of the used water. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707DXTV
Width:
Height:
Finish: White
Extra Data: ASTM D2665 and D3311, Do not test or use with compressed air or other gases, Maximum service temperature 140°F, NSF/ANSI Standard 14
Bullet5: UL Listed 94V-0
Bullet6: NSF U.P. Certified
Country: US
Description: Closet Flange with Knockout Test Plug Hub - PVC DWV
Item Description
The reducing coupling features solder cups. The fitting provides a means of connecting larger size tube to smaller size tube. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706UJ00
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Bullet8: UL 207 Recognized to 700 PSI (select diameters)
Bullet9: Material, workmanship and dimensions per MSS SP-109 (5" to 8")
Item Description
NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO® PressG™ fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO® PressG fittings are user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® PressG fittings features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® PressG copper fittings are backed by a 25-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 70TTXHN
Width:
Height:
Extra Data: ASTM B75 Alloy C12200 Copper, IFGC International Fuel Gas Code, Operating pressure 200 PSI max, (125 PSI for natural gas applications) depending on the application., Temperature range -40°F to 180°F
Bullet10: NFPA 31 Standard for the Installation of Oil Burning Equipment (supply line only)
Bullet5: NFPA 54/Z223.1 National Fuel Gas Code
Bullet6: NFPA 58 Liquified Petroleum Gas Code
Bullet7: UPC Chapter 12 Fuel Piping
Bullet8: NFPA30 Flammable and Combustible Liquids Code
Bullet9: NFPA30A Code for Motor Fuel Dispensing Facilities and Repair Garages
Extra Data: Full port, Max temperature rating 300 Degrees F, Silicon Performance Bronze® body, ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Lead-free
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet7: NIBCO® HydraPure® lead-free markings on handle and body
Bullet8: Threaded end connections
Bullet9: Dezincification resistant
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engine
Height: 3.500
Length: 5.75
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Full port, Max temperature rating 300 Degrees F, Silicon Performance Bronze® body, ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Lead-free
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet7: NIBCO® HydraPure® lead-free markings on handle and body
Bullet8: Threaded end connections
Bullet9: Dezincification resistant
Country: USA
Description: Two-Piece Bronze Ball Valve - Lead-Free*, Full Port, Threaded
Disclaimer: Performance Bronze is a registered trademark of NIBCO INC. NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 3.000
Length: 5.5
MadeInUSA: Yes
Material: Lead-Free Bronze
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Full port, Max temperature rating 300 Degrees F, Silicon Performance Bronze® body, ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Lead-free
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet7: NIBCO® HydraPure® lead-free markings on handle and body
Bullet8: Solder end connections
Bullet9: Dezincification resistant
Country: USA
Description: Two-Piece Bronze Ball Valve - Lead-Free*, Full Port, Solder
Disclaimer: Performance Bronze pecent is a registered trademark of NIBCO INC. NIBSEAL pecent is a registered trademark of NIBCO INC.
Height: 3.000
Length: 5.5
MadeInUSA: Yes
Material: Lead-Free Bronze
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Full port, Max temperature rating 300 Degrees F, Silicon Performance Bronze® body, ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Lead-free
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet7: NIBCO® HydraPure® lead-free markings on handle and body
Bullet8: Solder end connections
Bullet9: Dezincification resistant
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineer
Height: 1.970
Length: 6.62
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO® PressG™ fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO® PressG fittings are user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® PressG fittings features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® PressG copper fittings are backed by a 25-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 70TTXG2
Width:
Height:
Extra Data: ASTM B75 Alloy C12200 Copper, IFGC International Fuel Gas Code, Operating pressure 200 PSI max, (125 PSI for natural gas applications) depending on the application., Temperature range -40°F to 180°F
Bullet10: NFPA 31 Standard for the Installation of Oil Burning Equipment (supply line only)
Bullet5: NFPA 54/Z223.1 National Fuel Gas Code
Bullet6: NFPA 58 Liquified Petroleum Gas Code
Bullet7: UPC Chapter 12 Fuel Piping
Bullet8: NFPA30 Flammable and Combustible Liquids Code
Bullet9: NFPA30A Code for Motor Fuel Dispensing Facilities and Repair Garages
Item Description
The tee features solder cups. The fitting allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706URU0
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: Material, workmanship and dimensions per MSS SP-109 (5" to 8")
Bullet8: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Bullet9: UL 207 Recognized to 700 PSI (select diameters)
Item Description
The frost-proof sillcock is ideal for use in low-pressure residential and commercial water systems. The 95C features a 180-degree turn ceramic seat for long service life. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. The NIBCO® sillcock is backed by the NIBCO 2-year limited warranty. Choose NIBCO® flow control products for the most specified, versatile and economical option in commercial and residential applications.
Item ID: 707H3CX
Width:
Height:
Extra Data: 180° turn, Ceramic seats, Chrome plated brass body, Length range 4” to 14”
Bullet5: Solder or threaded end connections
Bullet6: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet7: ASSE 1019-C
Country: TW
Description: The frost-proof sillcock is ideal for use in low-pressure residential and commercial water systems. The 95C features a 180-degree turn ceramic seat for long service life. Please refer to NIBCO technical data sheets and catalogs for engineering and installa
Height: 1.000
Length: 9.750
Minimum Order Quantity: 10
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The wrot copper heat exchanger slips entirely through the fitting on the small end of the run, and exhibits good corrosion-resistance properties. Sizes available are the same as listed for the NIBCO® 611 tee, where the tee has one or more reductions on one end of run. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XJLG
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: Material, workmanship and dimensions per MSS SP-109 (5" to 8")
Item Description
The NIBCO® carbon steel ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The reinforced PTFE seat ring and stainless steel ball exhibits high chemical resistance properties and is recommended for process piping. The one-piece design eliminates leak paths and features threaded end connections for easy installation. Please refer to NIBCO technical data sheets, valve selection guides, chemical resistance guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and industrial applications. NIBCO® ball valves are backed by the exclusive NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFQ8P
Width:
Height:
Extra Data: Blowout-proof stem, Maximum temperature rating 400°F, Reduced port, Valve pressure rating 2000 psi 138 bar non-shock cold working pressure
Bullet5: Stainless steel ball and carbon steel stem
Item Description
The frost-proof sillcock is ideal for use in low-pressure residential and commercial water systems. The 95C features a 180-degree turn ceramic seat for long service life. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. The NIBCO® sillcock is backed by the NIBCO 2-year limited warranty. Choose NIBCO® flow control products for the most specified, versatile and economical option in commercial and residential applications.
Item ID: 707H3CR
Width:
Height:
Extra Data: 180° turn, Ceramic seats, Chrome plated brass body, Length range 4” to 14”
Bullet5: Solder or threaded end connections
Bullet6: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet7: ASSE 1019-C
Country: TW
Description: The frost-proof sillcock is ideal for use in low-pressure residential and commercial water systems. The 95C features a 180-degree turn ceramic seat for long service life. Please refer to NIBCO technical data sheets and catalogs for engineering and installa
Height: 1.000
Length: 11.750
Minimum Order Quantity: 10
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The tee features solder cups. The fitting allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706URUT
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: Material, workmanship and dimensions per MSS SP-109 (5" to 8")
Bullet8: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Bullet9: UL 207 Recognized to 700 PSI (select diameters)
Item Description
The NIBCO® carbon steel ball valve provides ease of operation with quarter-turn (90 degrees) open to close. This valve features a standard locking lever handle for security purposes. It may be used for isolation and throttling (half open to full open only). The one-piece design eliminates leak paths and features threaded ends for easy installation. Please refer to NIBCO technical data sheets, valve selection guides, chemical resistance guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and industrial applications. NIBCO® ball valves are backed by the exclusive NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFQ85
Width:
Height:
Extra Data: Blowout-proof stem, Maximum temperature rating 400°F, Reduced port, Valve pressure rating 2000 psi 138 bar non-shock cold working pressure
Item Description
NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO® Press System® fittings are designed to join with seamless copper water tube in residential and commercial potable, hot, chilled and process water applications for plumbing and HVAC systems. The press fittings can also be installed underground. The NIBCO® Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO® Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® Press System® copper fittings are backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 70TTXJ1
Width:
Height:
Extra Data: Dezincification resistant, Lead-free*, Operating pressure 200 psi cwp, Temperature range -20°F to 250°F
Bullet5: ASTM B75 Alloy C12200 Copper
Bullet6: Complies with ASME B16/51 Performance
Bullet7: Third party certified to UPC
Bullet8: Third party certified to the performance requirements of CSA MSE 13 and PS-117
Item Description
The 90-degree elbow features a solder cup and female NPT thread. The fitting provides a means of changing the pipeline direction 90 degrees, as well as adapting from a solder connection to a threaded connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XTFG
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.18, Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Pro-Pal valves are your best choice for efficient installation and system operation, and for helping to control costs. Pro-Pal Valves combine commonly used components into a single forged brass alternative that will save time and space in any installation. Instead of just building your next piping system, innovate it with Pro-Pal Series Valves. Pro-Pal 3-way press ball valves combine a tee fitting and ball valve into a single forged brass solution. These space-saving valves offer an array of flow-control options depending on the user’s application needs and a dual stem seal design that provides extra leak protection. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 70U91WK
Width:
Height:
Extra Data: 3-Way Press Valve Combines a Tee Fitting and a Ball Valve for Greater Flow Control, 90° Handle Operation, Ideal for Use as a Diverter or Selector Valve, O-ring and PTFE Packing Dual Stem Seal
Bullet10: Models available to satisfy all state and federal low-lead laws
Bullet5: Saves 36 Minutes
Bullet6: Replaces 4 Components
Bullet7: Eliminates 4 Leak Paths
Bullet8: Ball valve with integral spring check saves labor, space, and leak paths
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Pro-Pal valves are your best choice for efficient installation and system operation, and for helping to control costs. Pro-Pal Valves combine commonly used components into a single forged brass alternative that will save time and space in any installation. Instead of just building your next piping system, innovate it with Pro-Pal Series Valves. Pro-Pal 3-way press ball valves combine a tee fitting and ball valve into a single forged brass solution. These space-saving valves offer an array of flow-control options depending on the user’s application needs and a dual stem seal design that provides extra leak protection. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 70U91WR
Width:
Height:
Extra Data: 180° Handle Operation, 3-Way Press Valve Combines a Tee Fitting and a Ball Valve for Greater Flow Control, Ideal for Use as a Diverter, Selector, or Mixing Valve, O-ring and PTFE Packing Dual Stem Seal
Bullet10: Models available to satisfy all state and federal low-lead laws
Bullet5: Saves 36 Minutes
Bullet6: Replaces 4 Components
Bullet7: Eliminates 4 Leak Paths
Bullet8: Ball valve with integral spring check saves labor, space, and leak paths
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The one-piece design eliminates leak paths and features NPT end connections for easy installation. Please refer to NIBCO technical data sheets, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HCYF6
Width:
Height:
Extra Data: Blowout-proof stem, Brass ball and silicon bronze stem, Maximum temperature rating 400°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet5: Standard lever handle
Bullet6: Threaded end connections
Bullet7: Dezincification resistant
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet9: Conforms to MSS SP-110
Country: US
Description: One-Piece Bronze Ball Valve - PTFE Seat, Bronze Trim
Height: 1.150
Length: 5.300
Made to Order: Yes
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The PVC DWV 45-degree wye features a hub x hub x hub connection and allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707DVWP
Width:
Height:
Finish: White
Extra Data: ASTM D2665 and D3311, Do not test or use with compressed air or other gases, Maximum service temperature 140°F, NSF/ANSI Standard 14
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site