Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The one-piece design eliminates leak paths and features NPT end connections for easy installation. Please refer to NIBCO technical data sheets, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HCYFJ
Width:
Height:
Extra Data: Blowout-proof stem, Brass ball and silicon bronze stem, Maximum temperature rating 400°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet5: Standard lever handle
Bullet6: Threaded end connections
Bullet7: Dezincification resistant
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet9: Conforms to MSS SP-110
Country: US
Description: One-Piece Bronze Ball Valve - PTFE Seat, Bronze Trim
Height: 2.800
Length: 4.300
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The bronze ball valve features press-to-connect end connections with an inboard bead and EPDM O-rings for quick and easy joinery to the piping system. The NIBCO Press System® is user friendly, quick and easy to install. Simply applying pressure from a press-fit tool tightens the O-ring onto the tube, ensuring a clean, permanent, watertight seal in seconds, with no flame, solder or flux. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System® applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO® Press System® features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. NIBCO® Press System® valves are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707KX8V
Width:
Height:
Extra Data: Full port, Maximum service temperature 250°F, Two-piece body, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Press leak-detection feature
Bullet5: Stainless steel trim
Bullet6: Blowout-proof stem
Bullet7: Vented ball
Bullet8: Reinforced PTFE seat rings
Bullet9: Press x press female end connections
Country: US
Description: Ball Valve - Bronze, 250 PSI, Stainless Steel Trim
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC.
Height: 1.290
Length: 6.000
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® full port bronze ball valve provides bubble-tight shutoff at 600 PSI. The two-piece valve is ideal for commercial and light industrial process applications that may include HVAC, hot and cold domestic water, low pressure steam, compressed air, LP gas and natural gas. The bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFU6V
Width:
Height:
Extra Data: Chrome plated brass ball, silicon bronze stem, Male x female threaded end connections, Maximum temperature rating 400°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®
Bullet7: Dezincification resistant
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet9: Conforms to MSS SP-110
Country: US
Description: Two-Piece Bronze Ball Valve - Male x Female Threaded End Connections
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 1.700
Length: 6.300
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The ABS DWV closet flange features a hub connection. The closet flange is secured to the floor of the dwelling so that a toilet can be affixed to it and allow for a pipe connection (under the floor) to continue the piping for evacuation of the used water. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707DTXW
Width:
Height:
Finish: Black
Extra Data: ASTM D2665, CSA B181.1, Do not test or use with compressed air or other gases, Service temperature -40°F to 180°F
Bullet5: ASTM D3965
Bullet6: ASTM D2661 and D3311
Bullet7: UL Listed 94V-0
Bullet8: NSF/ANSI Standard 14
Bullet9: NSF U.P. Certified
Country: US
Description: Reducing Closet Flange Hub - ABS DWV
Disclaimer: Do not use or test with compressed air or other gasses.
Finish Family: Black
Height: 2.750
Length: 7.000
Low Lead: Yes
MadeInUSA: Yes
Material: Acrylonitrile Butadiene Styrene
Minimum Order Quantity: 25
Prop65: This product can expose you to Styrene, a chemical known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The one-piece valve is recommended for hot/cold water, HVAC, some chemical and utility service applications. Please refer to NIBCO technical data sheets, chemical resistance guides, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HCYEH
Width:
Height:
Extra Data: Blowout-proof stem, Maximum temperature rating 400°F, Reduced port, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Conforms to MSS SP-110
Bullet5: Brass ball and silicon bronze stem
Bullet6: Standard lever handle
Bullet7: Threaded end connections
Bullet8: Dezincification resistant
Bullet9: Use in U.S. drinking water applications is prohibited after January 3, 2014
Country: US
Description: One-Piece Bronze Ball Valve - Reinforced PTFE, Bronze Trim
Height: 2.800
Length: 4.300
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR50K
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - MPT Body X FPT Tailpiece
Height: 1.000
Length: 3.010
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR502
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Bullet7: Solder ends per ASME B16.22
Country: CN
Description: Union w/Test Port - MPT Body X Solder Tailpiece
Height: 1.000
Length: 2.890
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR431
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - FPT Body x MPT Tailpiece
Height: 1.000
Length: 3.110
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR42J
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - Threaded Ends
Height: 1.000
Length: 2.620
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR50V
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - MPT Body X MPT Tailpiece
Height: 1.000
Length: 3.650
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCVH5
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - Threaded Ends
Height: 2.600
Length: 3.050
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR41A
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Bullet7: Solder ends per ASME B16.22
Country: CN
Description: Union w/Test Port - Solder Body x MPT Tailpiece
Height: 1.000
Length: 3.320
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Use in U.S. drinking water applications is prohibited after January 3, 2014
Country: US
Description: Brass Male Hose Adapter - JIC x Sweat
Disclaimer: ChamFlex pecent is a registered trademark of Chamberlin Rubber Company Inc.
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR511
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - MPT Body X MPT Tailpiece
Height: 1.000
Length: 3.500
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR50J
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - MPT Body X FPT Tailpiece
Height: 1.000
Length: 3.010
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR349
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Bullet7: Solder ends per ASME B16.22
Country: CN
Description: Union w/Test Port - Solder Ends
Height: 1.000
Length: 2.960
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR430
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - FPT Body x MPT Tailpiece
Height: 1.000
Length: 3.110
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR423
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Bullet7: Solder ends per ASME B16.22
Country: CN
Description: Union w/Test Port - FPT Body X Solder Tailpiece
Height: 1.000
Length: 2.910
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR40P
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Bullet7: Solder ends per ASME B16.22
Country: CN
Description: Union w/Test Port - Solder Body X FPT Tailpiece
Height: 1.000
Length: 2.890
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR4ZX
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Bullet7: Solder ends per ASME B16.22
Country: CN
Description: Union w/Test Port - MPT Body X Solder Tailpiece
Height: 1.000
Length: 3.310
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR429
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Bullet7: Solder ends per ASME B16.22
Country: CN
Description: Union w/Test Port - FPT Body X Solder Tailpiece
Height: 1.000
Length: 2.750
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR510
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - MPT Body X MPT Tailpiece
Height: 1.000
Length: 3.500
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR40W
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Bullet7: Solder ends per ASME B16.22
Country: CN
Description: Union w/Test Port - Solder Body X FPT Tailpiece
Height: 1.000
Length: 2.830
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR348
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Bullet7: Solder ends per ASME B16.22
Country: CN
Description: Union w/Test Port - Solder Ends
Height: 1.000
Length: 2.710
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.