Item Description
The NIBCO® bronze check valve features threaded end connections for ease of installation. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCXFG
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 366°F/185°C, 300 psi/20.7 bar non-shock cold working pressure, Renewable PTFE disc, Y-pattern
AltImageName1: /NBC/T433Y.jpg
AltImageName2: /NBC/T433Y.jpg
AltImagePath1: /NBC-T433Y.JPEG
AltImagePath2: /NBC-T433Y.JPEG
Bullet5: Regrindable seat
Bullet6: Class 150 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. The two-piece valve is recommended for many applications, including HVAC, hot and cold potable water, and non-potable process water. The lever handle provides convenient quarter-turn operation and bubble-tight shutoff. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. NIBCO Press System® valves are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707KY7C
Width:
Height:
Extra Data: Full port, Maximum service temperature 250°F, Two-piece body, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Dezincification resistant
Bullet5: Silicon bronze stem
Bullet6: Reinforced PTFE seat rings
Bullet7: Press x press female end connections
Bullet8: Press leak-detection feature
Bullet9: Multiple handle options, including NIB-Seal®
Country: US
Description: Ball Valve - Bronze, 250 PSI
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC.
Height: 3.690
Length: 10.800
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron lug butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design, there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in EPDM seat liner with CF8M stainless steel disc & stem is recommended for most water applications. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJZRF
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Lug style, Valve pressure rating 200 psi
Bullet10: Designed to meet MSS SP-67
Bullet5: CF8M stainless steel disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique molded-in EPDM seat liner with stainless steel disc is recommended for the higher pressure requirements of systems today and chemical applications the liner compatibility will permit. With the internal stem/disc geometric drive design eliminates the need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMXK6
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Valve pressure rating 285 psi, Wafer style
AltImageName1: /NBC/WD5022.jpg
AltImageName2: /NBC/WD5022.jpg
AltImagePath1: /NBC-WD5022.JPEG
AltImagePath2: /NBC-WD5022.JPEG
Bullet10: Not recommended for steam service
Bullet5: Stainless steel disc
Bullet6: Stainless steel stem with stainless steel bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The PTFE seat ring and stainless steel ball and stem exhibits high chemical resistance properties and is recommended for many high pressure applications. The three-piece valve features threaded ends for easy installation. Options include NIB-SEAL® insulated handle that eliminates condensate. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HG018
Width:
Height:
Extra Data: Full port, Maximum temperature rating 400°F, Stainless steel ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet5: Blowout-proof stem
Bullet6: Vented ball
Bullet7: Standard lever handle, optional NIB-SEAL®
Bullet8: Threaded end connections
Bullet9: Dezincification resistant
Country: US
Description: Three-Piece Bronze Ball Valve - Full Port, Stainless Steel Trim
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The 90-degree elbow features solder cups and a close rough radius. The fitting provides a means of changing the pipeline direction 90 degrees. It is used when velocity is not a problem. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XTF9
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.18, Use in U.S. drinking water applications is prohibited after January 3, 2014
Country: MX
Description: 90 degrees Elbow Close Rough C x C - Cast
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® Iron Isolation Balancing Y-strainer helps filter particulte to protect piping systems. The Y-strainer includes multiple tapped ports for PT points, air vents and acessories . An integral Stainless Steel perforated screen is also provided. Strainer is designed to allow servicing of the screen without having to remove the strainer from the line, a blow-down plug is also included for screen maintenance. The strainers designed with flanged end connections for easy installation. A Geared Butterfly Valve with Aluminum Bronze Disc and Stainless Steel Stem is included to provide isolation. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® strainers are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HUXWR
Width:
Height:
Extra Data: 150 psi non-shock -20°F to 150°F (Sizes 14" & 16"), 200 psi non-shock -20°F to 150°F (Sizes 2"-12"), Maximum temperature 250°F at 125 psi (Sizes 14" & 16"), Maximum temperature 250°F at 175 psi (Sizes 2"-12")
Bullet5: Pressure temperature port
Bullet6: Perforated stainless steel screen
Bullet7: Tapped cap with plug
Bullet8: ANSI Class 125 flanges
Bullet9: ANSI Class 125 flanges
Country: US
Material: Cast Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The flange features a solder cup and flange face. This fitting provides a means for adapting a solder connection to a flange connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item Description
The check valve includes renewable bronze discs. Grooved silent check valves may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HN3E3
Width:
Height:
Extra Data: Maximum temperature 180°F/ 82°C, Renewable bronze discs, Spring actuated, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
AltImageName1: /NBC/G920W.jpg
AltImageName2: /NBC/G920W.jpg
AltImagePath1: /NBC-G920W.JPEG
AltImagePath2: /NBC-G920W.JPEG
Bullet5: Buna-N seat
Bullet6: Grooved end connections
Bullet7: Lead-free*
Bullet8: Conforms to ANSI/AWWA C606 for steel IPS pipe
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in EPDM seat liner with stainless steel disc is recommended for chemical applications the liner compatibility will permit. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMUM5
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Valve pressure rating 250 psi, Wafer style
AltImageName1: /NBC/WD30223.jpg
AltImageName2: /NBC/WD30223.jpg
AltImagePath1: /NBC-WD30223.JPEG
AltImagePath2: /NBC-WD30223.JPEG
Bullet10: Not recommended for steam service
Bullet5: Stainless steel disc
Bullet6: Stainless steel stem with stainless steel bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The three-piece valve features solder ends for easy installation. Options include NIB-SEAL® insulated handle that eliminates condensate. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HCNLG
Width:
Height:
Extra Data: Full port, Maximum temperature rating 400°F, Stainless steel ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet5: Blowout-proof stem
Bullet6: Vented ball
Bullet7: Standard lever handle or locking lever, optional NIB-SEAL®
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in EPDM seat liner with stainless steel disc is recommended for chemical applications the liner compatibility will permit. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMUME
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Valve pressure rating 250 psi, Wafer style
AltImageName1: /NBC/WD30223.jpg
AltImageName2: /NBC/WD30223.jpg
AltImagePath1: /NBC-WD30223.JPEG
AltImagePath2: /NBC-WD30223.JPEG
Bullet10: Not recommended for steam service
Bullet5: Stainless steel disc
Bullet6: Stainless steel stem with stainless steel bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron lug butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design, there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in Buna-N seat liner with CF8M stainless steel disc & stem for non-water applications. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJVVW
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, Buna-N molded-in seat liner, Lug style, Valve pressure rating 200 psi
Bullet10: Designed to meet MSS SP-67
Bullet5: CF8M stainless steel disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® three-piece ball valve provides ease of operation with quarter-turn (90 degrees) open to close. This valve features threaded ends for easy installation and cast ISO mounting pad for actuation purposes. Please refer to NIBCO technical data sheets, valve selection guides, chemical resistance guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and industrial applications. NIBCO® ball valves are backed by the exclusive NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HG03E
Width:
Height:
Extra Data: Cast ISO mounting pad, Full port, Maximum temperature rating 400°F, Valve pressure rating 1,000 psi 69 bar non-shock cold working pressure
Bullet10: Conforms to MSS SP-110
Bullet5: Blowout-proof stem
Bullet6: Stainless steel ball and stem
Bullet7: Vented ball
Bullet8: Locking lever handle
Bullet9: Threaded end connections
Country: TW
Description: Three-Piece Stainless Steel Ball Valve - Threaded ISO Mount
Item Description
The male adapter features a solder cup and male NPT thread. These fittings provide a means for adapting a solder connection to a threaded connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XRHX
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.18, Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The PTFE seat ring and stainless steel ball and stem exhibits high chemical resistance properties and is recommended for many high pressure applications. The three-piece valve features solder end connections for easy installation. Options include NIB-SEAL® insulated handle that eliminates condensate. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HCNLW
Width:
Height:
Extra Data: Full port, Maximum temperature rating 400°F, Valve pressure rating 200 psi 13.8 bar for medical gas, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR235
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Height: 1.000
Length: 10.570
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO pecent ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve features an EPDM encapsulated ductile iron disc. The internal stem/disc splined drive design eliminates the need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO pecent ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO pecent butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HN0GY
Width:
Height:
Extra Data: EPDM encapsulated ductile iron disc, Grooved style, Max temperature rating 200 Degrees F, Valve pressure rating 300 psi (2'' to 10''); 200 psi (12'' only)
AltImageName1: /NBC/GD47653.jpg
AltImageName2: /NBC/GD47653.jpg
AltImagePath1: /NBC-GD47653.JPEG
AltImagePath2: /NBC-GD47653.JPEG
Bullet10: Certified to NSF/ANSI-61-8 and NSF/ANSI-372
Bullet11: Designed to meet MSS SP-67
Bullet12: MSS SP-25 (markings)
Bullet5: Stainless steel stem with metal bushings
Bullet6: Splined drive
Bullet7: Extended neck
Bullet8: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR228
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Height: 3.000
Length: 11.830
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The PTFE seat ring and stainless steel ball and stem exhibits high chemical resistance properties and is recommended for many high pressure applications. The three-piece valve features solder end connections for easy installation. Options include NIB-SEAL® insulated handle that eliminates condensate. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HCNLP
Width:
Height:
Extra Data: Full port, Maximum temperature rating 400°F, Valve pressure rating 200 psi 13.8 bar for medical gas, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR157
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze gate valve may be used in commercial and industrial applications, HVAC, specifically for steam, and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® gate valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCTH6
Width:
Height:
Extra Data: 200 psi/13.8 bar saturated steam to 391°F/201°C, 400 psi/20.7 bar non-shock cold working pressure, Alloy solid wedge, Rising stem
Bullet10: Conforms to MSS SP-80
Bullet5: Union bonnet
Bullet6: Integral seat
Bullet7: Class 200 threaded end connections
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet9: Dezincification resistant
Country: US
Description: Gate Valve - Bronze, Class 200, Block Pattern
Height: 4.520
Length: 14.170
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR05L
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site