Item Description
The PVC Schedule 40 bushing is used in cold water pressure distribution systems including irrigation, pool and spa, potable water and chilled water applications. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness. PVC Schedule 40 is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707E2P0
Width:
Height:
Finish: White
Extra Data: ASTM D1784, cell Class 12454, ASTM D2466, Do not test or use with compressed air or other gases, Maximum service temperature 140°F
Item Description
The PVC Schedule 40 bushing is used in cold water pressure distribution systems including irrigation, pool and spa, potable water and chilled water applications. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness. PVC Schedule 40 is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707E1RW
Width:
Height:
Finish: White
Extra Data: ASTM D1784, cell Class 12454, ASTM D2466, Do not test or use with compressed air or other gases, Maximum service temperature 140°F
Item Description
The PVC Schedule 40 bushing is used in cold water pressure distribution systems including irrigation, pool and spa, potable water and chilled water applications. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness. PVC Schedule 40 is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707GVJX
Width:
Height:
Finish: White
Extra Data: ASTM D1784, cell Class 12454, ASTM D2466, Do not test or use with compressed air or other gases, Maximum service temperature 140°F
Item Description
The PVC Schedule 40 bushing is used in cold water pressure distribution systems including irrigation, pool and spa, potable water and chilled water applications. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness. PVC Schedule 40 is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707E2NZ
Width:
Height:
Finish: White
Extra Data: ASTM D1784, cell Class 12454, ASTM D2466, Do not test or use with compressed air or other gases, Maximum service temperature 140°F
Item Description
The PVC Schedule 40 bushing is used in cold water pressure distribution systems including irrigation, pool and spa, potable water and chilled water applications. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness. PVC Schedule 40 is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707E1RV
Width:
Height:
Finish: White
Extra Data: ASTM D1784, cell Class 12454, ASTM D2466, Do not test or use with compressed air or other gases, Maximum service temperature 140°F
Item Description
The PVC Schedule 40 bushing is used in cold water pressure distribution systems including irrigation, pool and spa, potable water and chilled water applications. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness. PVC Schedule 40 is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707E1RY
Width:
Height:
Finish: White
Extra Data: ASTM D1784, cell Class 12454, ASTM D2466, Do not test or use with compressed air or other gases, Maximum service temperature 140°F
Item Description
The PVC Schedule 40 bushing is used in cold water pressure distribution systems including irrigation, pool and spa, potable water and chilled water applications. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness. PVC Schedule 40 is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707E2NY
Width:
Height:
Finish: White
Extra Data: ASTM D1784, cell Class 12454, ASTM D2466, Do not test or use with compressed air or other gases, Maximum service temperature 140°F
Item Description
The PVC Schedule 40 bushing is used in cold water pressure distribution systems including irrigation, pool and spa, potable water and chilled water applications. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness. PVC Schedule 40 is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707E2P1
Width:
Height:
Finish: White
Extra Data: ASTM D1784, cell Class 12454, ASTM D2466, Do not test or use with compressed air or other gases, Maximum service temperature 140°F
Item Description
The PVC Schedule 40 bushing is used in cold water pressure distribution systems including irrigation, pool and spa, potable water and chilled water applications. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness. PVC Schedule 40 is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707E1RX
Width:
Height:
Finish: White
Extra Data: ASTM D1784, cell Class 12454, ASTM D2466, Do not test or use with compressed air or other gases, Maximum service temperature 140°F
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded end connections for easy installation. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO® specialty valves are backed by a NIBCO INC. 2-year limited warranty.
Item ID: 70HFW6K
Width:
Height:
Extra Data: Blowout-proof stem, Chrome-plated brass ball and brass stem, Standard port, Valve pressure rating 400 psi/28 bar non-shock cold working pressure
Bullet5: Standard lever handle
Bullet6: Threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Country: CN
Description: Ball Valve - Brass, Two-Piece, Standard Port, NPT x NPT
Height: 1.400
Length: 4.900
Material: Brass
Minimum Order Quantity: 16
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® brass ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder end connections for easy installation. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO® specialty valves are backed by a NIBCO INC. 2-year limited warranty.
Item ID: 70HCPJX
Width:
Height:
Extra Data: Blowout-proof stem, Chrome-plated brass ball and brass stem, Standard port, Valve pressure rating 400 psi/28 bar non-shock cold working pressure
Bullet5: Standard lever handle
Bullet6: Solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Country: CN
Description: Ball Valve - Brass, Two-Piece, Standard Port, C x C
Height: 1.400
Length: 4.900
Material: Brass
Minimum Order Quantity: 16
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO PressACR fittings are the fastest, easiest way to join copper tubing systems. NIBCO® PressACR fittings are designed to join with seamless copper water tube in aira conditioniong and refrigeration applications systems. The press fittings can also be installed underground. The NIBCO® PressACR fittings are user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® PressACR applies the proven performance of press technology to NIBCO high pressure ACR fittings. NIBCO® PressACR fittings features a full range of precision engineered copper fittings, accessories, pressing tools and jaws. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® PressACR copper fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Bullet5: Approved Oils: POE, PAG, MO, PAO, PVE and ABR456A
Bullet6: UL 207 Recognized to 700 PSI
Bullet7: Complies with: ISO 5149-2, ISO I4903 Helium leak test, ISO 14903 Thermal cycle test, ISO 14903 Fatigue test, ISO 14903 Freeze test, UL 109 vibration
Item Description
Webstone offers a wide array of products designed to support efficient opperations. Protect your system from damaging debris with an integrated strainer that collects loose particles and separates them from the system flow. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 70UD6ER
Width:
Height:
Extra Data: O-ring sealed and plugged blow down port for easy installation of a drain valve, O-ring sealed and plugged strainerport for easy removal of filter, Replaceable screen, 20 or 40 mesh options, Suitable for vertical or horizontal installation
Bullet5: Models available to satisfy all state and federal low-lead laws
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076UH5
Width:
Height:
Extra Data: Available in MIP x FIP, Certified to NSF/ANSI 61, Controls or Relieves Pressure in a System, Models available to satisfy all state and federal low-lead laws
Country: US
Height: 1.770
Length: 3.230
MadeInUSA: Yes
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Ship Weight: 45
Shipping Height: 8.5
Shipping Length: 19
Shipping Width: 11
UOM: Each
Weight: 0.45
Width: 1.770
Standard Plumbing Category: Plumbing Supplies
Standard Plumbing Subcategory: Valves
Standard Plumbing Subtype: Pressure Reducing Valve
Item Description
The flush bushing features a male solder end and solder cup. These fittings provide a means of reducing the size of a line. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XPJN
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Item Description
NIBCO® Press System® fittings are the fastest, easiest way to join copper tubing systems in residential and commercial potable, hot, chilled and process water applications for plumbing and HVAC systems. The press fittings can also be installed underground. The NIBCO® Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO® Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® Press System® copper fittings are backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XTGG
Width:
Height:
Extra Data: Dezincification resistant, Lead-free*, Operating pressure 200 psi cwp, Temperature range -20°F to 250°F
Bullet5: ASTM B584 C87600 cast silicon bronze
Bullet6: NSF/ANSI/CAN-61
Bullet7: Third party certified to UPC
Bullet8: Third party certified to the performance requirements of CSA MSE 13 and PS-117
Country: MX
Description: 90 degrees Drop Elbow P x F - Lead-Free* Cast Bronze
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Easily control flow with this quarter-turn valve. Designed for use with water, oil, glycol mix in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076YF3
Width:
Height:
Extra Data: Adjustable Packing Gland, Ball valve with integral spring check saves labor, space, and leak paths, Controls Flow With Quarter-Turn Lever Handle, Includes 1/4" FIP Gauge Port for Monitoring System Conditions
Bullet5: Available in FIP
Country: CN
Height: 4.800
Length: 11.600
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: NFPA 13, 13D and 13R, Operating pressure up to 200 psi cwp depending on the application, Temperature range -20°F to 250°F depending on the application, Third party certified to IAPMO PS-117
Bullet5: IRC International Residential Code (ICC PMG)
Bullet6: IMC International Mechanical Code (ICC PMG)
Bullet7: UPC Uniform Plumbing Code
Bullet8: UMC Uniform Mechanical Code
Bullet9: ASME B31 Code for Pressure Pipe
Country: China
Description: NIBCO BenchPress fittings are the fastest, easiest way to join carbon steel pipe systems. NIBCO BenchPress fittings are designed to join carbon steel pipe in residential and commercial fire sprinkler, chilled water, hydronic heating and low pressure steam
Item Description
The tee features push-to-connect ends. This fitting allows for a connection to be made in continuous pipe line and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''s reusability makes it an ideal application in sustainable projects. NIBCO Push fittings are backed by a 25-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XUEW
Width:
Height:
Extra Data: 200 psi and 200 Degrees F, Dezincification resistant, Lead-Free, Removable and reusable
Bullet5: For use with copper, CPVC-CTS or PEX tubing
Bullet6: Third-party certified to NSF/ANSI 14, 61, and 372
Item Description
The coupling features solder cups and a rolled stop. The fitting provides a means of connecting two lengths of tube together. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706UHY5
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Bullet8: UL 207 Recognized to 700 PSI (select diameters)
Country: US
Description: Coupling with Rolled Tube Stop C x C - Wrot
Item Description
The 90-degree elbow features a push-to-connect end and male NPT thread. These fittings provide a means of changing the pipelines direction 90 degrees, as well as adapting from a push connection to a threaded connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO Push fittings are backed by a 25-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XTH9
Width:
Height:
Extra Data: 200 psi and 200°F, Dezincification resistant, Lead-free*, Removable and reusable
Bullet5: For use with copper, CPVC-CTS or PEX tubing
Bullet6: Third-party certified to NSF/ANSI 14, 61, and 372
Extra Data: NFPA 13, 13D and 13R, Operating pressure up to 200 psi cwp depending on the application, Temperature range -20°F to 250°F depending on the application, Third party certified to IAPMO PS-117
Bullet5: IRC International Residential Code (ICC PMG)
Bullet6: IMC International Mechanical Code (ICC PMG)
Bullet7: UPC Uniform Plumbing Code
Bullet8: UMC Uniform Mechanical Code
Bullet9: ASME B31 Code for Pressure Pipe
Country: China
Description: NIBCO BenchPress fittings are the fastest, easiest way to join carbon steel pipe systems. NIBCO BenchPress fittings are designed to join carbon steel pipe in residential and commercial fire sprinkler, chilled water, hydronic heating and low pressure steam
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO® PressG™ fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO® PressG fittings are user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® PressG fittings features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® PressG copper fittings are backed by a 25-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 70TTXHE
Width:
Height:
Extra Data: ASTM B75 Alloy C12200 Copper, IFGC International Fuel Gas Code, Operating pressure 200 PSI max, (125 PSI for natural gas applications) depending on the application., Temperature range -40°F to 180°F
Bullet10: NFPA 31 Standard for the Installation of Oil Burning Equipment (supply line only)
Bullet5: NFPA 54/Z223.1 National Fuel Gas Code
Bullet6: NFPA 58 Liquified Petroleum Gas Code
Bullet7: UPC Chapter 12 Fuel Piping
Bullet8: NFPA30 Flammable and Combustible Liquids Code
Bullet9: NFPA30A Code for Motor Fuel Dispensing Facilities and Repair Garages
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site