Item Description
Designed for use with water, oil, glycol mix in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.

• Item ID: 70TWZ3Y
• Width:
• Height:
• Extra Data: Compatible With 3/4 Copper Finned Tube, Lead-free*, Models available to satisfy all state and federal low-lead laws, Provides the Necessary Reinforcement for Creating Press Connections on Copper Finned Tubing
• Country: CN
• Height: 1.700
• Install Link: Installation Link
• Length: 3.800
• Material: Brass
• Minimum Order Quantity: 1
• Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
• Spec Sheet: Spec Sheet
• UOM: Each
• Weight: 0.03
• Width: 1.700
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Fittings
• Standard Plumbing Subtype: Elbows

Item Description
Webstone''''s lead free ProPush line is one of the most complete and versatile lines in the industry. The easy push-on connections may be used with Copper, CPVC, or PEX. Designed for use with water in residential or commercial plumbing systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.

• Item ID: 7076WFJ
• Width:
• Height:
• Extra Data: Compatible With Webstone ProPush Products, Reinforces PEX Piping
• Country: CN
• Height: 0.400
• Install Link: Installation Link
• Length: 2.000
• Material: Plastic
• Minimum Order Quantity: 1
• Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
• Ship Weight: 0.013
• Spec Sheet: Spec Sheet
• UOM: Each
• Weight: 0.01
• Width: 1.600
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Fittings
• Standard Plumbing Subtype: Fitting Accessory

Item Description
NIBCO pecent PEX delivers clean, safe potable water because there are no toxic chemical additives in the material, no leaching of colors and there is no metal taste or odor. In addition, NIBCO pecent PEX is chlorine-resistant, corrosion-resistant, freeze-resistant and abrasion-resistant. The excellent thermal properties of PEX means hot water stays hot and cold water stays cold. In addition, the insulating properties of PEX eliminate the noise and vibration from water hammer. NIBCO pecent PEX tubing, fittings, valves, and manifolds are designed to be used as a complete system, and are backed by a NIBCO INC. limited warranty.

• Item ID: 70HV4QH
• Width:
• Height:
• Finish: Orange
• Extra Data: NSF-pw, Pressure/temperature rating 100 psi at 180 degrees F, Pressure/temperature rating 160 psi at 73 degrees F, Pressure/temperature rating 80 psi at 200 degrees F
• Bullet10: CSA B137.5
• Bullet11: Certified by UPC
• Bullet12: SDR-9
• Bullet5: Complies with ASTM F876
• Bullet6: Complies with ASTM F877
• Bullet7: Complies with ASTM F1807
• Bullet8: Complies with ASTM F2159
• Bullet9: Complies with ASTM F2023
• Country: Canada
• Description: Barrier-PEX Tubing - Orange
• Finish Family: Solid Colors
• Height: 11.00
• Install Link: Installation Link
• Length: 6000
• Low Lead: LL Compliant NSF/ANSI 372
• Material: Cross-Linked Polyethelyene
• Ship Weight: 250.5
• Shipping Height: 0
• Shipping Length: 0
• Shipping Width: 0
• Weight: 83.50
• Width: 38.50
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Parts

Item Description
The CPVC-CTS cap features a female socket connection to fit over the end of a pipe to create a seal. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Chlorinated Polyvinyl Chloride (CPVC) has proven to be an excellent material for hot corrosive liquids, hot and cold water distribution, and similar applications above the temperature range of PVC. CPVC will not rust, pit, scale or corrode. CPVC fittings are easy to install and are joined by solvent cementing or threading. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry. FlowGuard Gold® is a registered trademark of The Lubrizol Corporation.

• Item ID: 707GVLT
• Width:
• Height:
• Finish: Tan
• Extra Data: ASTM, ASTM D, Maximum service temperature 180°F, Not for use with compressed air or other gases
• Bullet5: NSF U.P. Certified
• Bullet6: NSF/ANSI
• Country: US
• Description: Cap Slip - CPVC-CTS
• Disclaimer: FlowGuard Gold pecent is a registered trademark of The Lubrizol Corporation.
• Finish Family: Brown
• Height: 0.630
• Install Link: Installation Link
• Length: 0.830
• Low Lead: Yes
• MadeInUSA: Yes
• Material: Chlorinated Polyvinyl Chloride
• Minimum Order Quantity: 10
• Ship Weight: 12.31
• Shipping Height: 8.5
• Shipping Length: 13.75
• Shipping Width: 10.25
• UOM: Each
• Weight: 0.01
• Width: 0.830
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Fittings
• Standard Plumbing Subtype: Caps

Item Description
The PVC Schedule 40 coupling is used in cold water pressure distribution systems including irrigation, pool and spa, potable water and chilled water applications. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness. PVC Schedule 40 is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• Item ID: 707E2QF
• Width:
• Height:
• Finish: White
• Extra Data: ASTM D1784, cell Class 12454, ASTM D2466, Do not test or use with compressed air or other gases, Maximum service temperature 140°F
• Bullet5: NSF/ANSI/CAN-61
• Bullet6: UL Listed 94V-0
• Bullet7: NSF U.P. Certified
• Country: US
• Finish Family: White
• Height: 1.100
• Install Link: Installation Link
• Length: 1.500
• Low Lead: Yes
• MadeInUSA: Yes
• Material: Polyvinyl Chloride
• Minimum Order Quantity: 100
• Ship Weight: 4.191
• Shipping Height: 6.25
• Shipping Length: 8.25
• Shipping Width: 7.75
• UOM: Each
• Weight: 0.04
• Width: 1.100
• Standard Finish: White
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Fittings
• Standard Plumbing Subtype: Couplings

Item Description
NIBCO® PEX fittings are lightweight, easy to install and maintenance-free. Joining can be accomplished with NIBCO copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps. The NIBCO® PEX system requires fewer fittings than traditional rigid plumbing systems resulting in fewer potential leak paths. NIBCO® PEX tubing, fittings, valves, and manifolds are designed to be used as a complete system, and are backed by a NIBCO INC. limited warranty.

• Item ID: 70HV0W9
• Width:
• Height:
• Extra Data: Complies with ASTM F2159, Complies with ASTM F877, Maximum service temperature 200°F, Third party certified to NSF-pw
• Bullet5: CSA B137.5
• Country: US
• Description: Tee - Poly
• Height: 0.846
• Length: 2.500
• MadeInUSA: Yes
• Material: Polysulfone
• Minimum Order Quantity: 25
• Ship Weight: 11.883
• Shipping Height: 9.75
• Shipping Length: 13.5
• Shipping Width: 10
• UOM: Each
• Weight: 0.02
• Width: 1.581
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Fittings
• Standard Plumbing Subtype: Tees

Item Description
The PVC Schedule 40 tee is used in cold water pressure distribution systems including irrigation, pool and spa, potable water and chilled water applications. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness. PVC Schedule 40 is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• Item ID: 707E2R9
• Width:
• Height:
• Finish: White
• Extra Data: ASTM D1784, cell Class 12454, ASTM D2466, Do not test or use with compressed air or other gases, Maximum service temperature 140°F
• Bullet5: NSF/ANSI/CAN-61
• Bullet6: UL Listed 94V-0
• Bullet7: NSF U.P. Certified
• Country: US
• Description: Tee Slip x Slip x Slip - PVC Schedule 40
• Finish Family: White
• Height: 1.100
• Install Link: Installation Link
• Length: 2.400
• Low Lead: Yes
• MadeInUSA: Yes
• Material: Polyvinyl Chloride
• Minimum Order Quantity: 50
• Ship Weight: 3.481
• Shipping Height: 6.25
• Shipping Length: 8.25
• Shipping Width: 7.75
• UOM: Each
• Weight: 0.06
• Width: 1.800
• Standard Finish: White
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Fittings
• Standard Plumbing Subtype: Tees

Item Description
The CPVC-CTS coupling features female socket connections and is used to connect two lengths of CPVC-CTS piping. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Chlorinated Polyvinyl Chloride (CPVC) has proven to be an excellent material for hot corrosive liquids, hot and cold water distribution, and similar applications above the temperature range of PVC. CPVC will not rust, pit, scale or corrode. CPVC fittings are easy to install and are joined by solvent cementing or threading. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry. FlowGuard Gold® is a registered trademark of The Lubrizol Corporation.

• Item ID: 707GVK3
• Width:
• Height:
• Finish: Tan
• Extra Data: ASTM, ASTM D, Maximum service temperature 180°F, Not for use with compressed air or other gases
• Bullet5: NSF U.P. Certified
• Bullet6: NSF/ANSI
• Country: US
• Description: Coupling Slip x Slip - CPVC-CTS
• Disclaimer: FlowGuard Gold pecent is a registered trademark of The Lubrizol Corporation.
• Finish Family: Brown
• Height: 0.860
• Install Link: Installation Link
• Length: 1.110
• Low Lead: Yes
• MadeInUSA: Yes
• Material: Chlorinated Polyvinyl Chloride
• Minimum Order Quantity: 20
• Ship Weight: 17.534
• Shipping Height: 10
• Shipping Length: 20.75
• Shipping Width: 10.375
• UOM: Each
• Weight: 0.02
• Width: 0.860
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Fittings
• Standard Plumbing Subtype: Couplings

Item Description
The PVC Schedule 40 90-degree elbow is used in cold water pressure distribution systems including irrigation, pool and spa, potable water and chilled water applications. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness. PVC Schedule 40 is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• Item ID: 707E2R5
• Width:
• Height:
• Finish: White
• Extra Data: ASTM D1784, cell Class 12454, ASTM D2466, Do not test or use with compressed air or other gases, Maximum service temperature 140°F
• Bullet5: NSF/ANSI/CAN-61
• Bullet6: UL Listed 94V-0
• Bullet7: NSF U.P. Certified
• Country: US
• Description: 90 degrees Elbow Slip x FIPT - PVC Schedule 40
• Finish Family: White
• Height: 1.090
• Install Link: Installation Link
• Length: 1.800
• Low Lead: Yes
• MadeInUSA: Yes
• Material: Polyvinyl Chloride
• Minimum Order Quantity: 50
• Ship Weight: 2.881
• Shipping Height: 6.25
• Shipping Length: 8.25
• Shipping Width: 7.75
• UOM: Each
• Weight: 0.05
• Width: 1.740
• Standard Finish: White
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Fittings
• Standard Plumbing Subtype: Elbows

Item Description
NIBCO pecent PEX-c tubing is high density polyethylene cross-linked with the PEX-c sterile electron beam process. The environmentally friendly e-beam process creates the highest quality PEX-c tubing, which exhibits superior mechanical properties. NIBCO pecent PEX-c shape memory assures that the piping retains its round, straight tubal shape from the cross-link process. Yet it is pliable and easy to handle, whether it''s in stick, spool or coil. It is quick and easy to install requiring fewer fittings, with no torch, flame, or solvent cement. NIBCO pecent PEX-c delivers clean, safe potable water because there are no toxic chemical additives in the material, no leaching of colors and there is no metal taste or odor. In addition, NIBCO pecent PEX-c is chlorine-resistant, corrosion-resistant, freeze-resistant and abrasion-resistant. The excellent thermal properties of PEX-c means hot water stays hot and cold water stays cold. In addition, the insulating properties of PEX-c eliminate the noise and vibration from water hammer. NIBCO pecent PEX-c tubing, fittings, valves, and manifolds are designed to be used as a complete system, and are backed by a NIBCO INC. limited warranty.

• Item ID: 70HV4PE
• Width:
• Height:
• Finish: Terra Cotta
• Extra Data: NSF-pw, Pressure/temperature rating 100 psi at 180 degrees F, Pressure/temperature rating 160 psi at 73 degrees F, Pressure/temperature rating 80 psi at 200 degrees F
• Bullet10: CSA B137.5
• Bullet11: Certified by UPC
• Bullet12: SDR-9
• Bullet5: Complies with ASTM F876
• Bullet6: Complies with ASTM F877
• Bullet7: Complies with ASTM F1807
• Bullet8: Complies with ASTM F2159
• Bullet9: Complies with ASTM F2023
• Country: United States
• Description: PEX-c Tubing - Terra Cotta
• Finish Family: Designer Finishes
• Height: 4.50
• Install Link: Installation Link
• Length: 32
• Low Lead: LL Compliant NSF/ANSI 372
• MadeInUSA: US
• Material: Cross-Linked Polyethelyene
• Ship Weight: 192.5
• Shipping Height: 43
• Shipping Length: 32
• Shipping Width: 32
• Weight: 48.13
• Width: 32.00
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Parts

Item Description
NIBCO pecent PEX-c tubing is high density polyethylene cross-linked with the PEX-c sterile electron beam process. The environmentally friendly e-beam process creates the highest quality PEX-c tubing, which exhibits superior mechanical properties. NIBCO pecent PEX-c shape memory assures that the piping retains its round, straight tubal shape from the cross-link process. Yet it is pliable and easy to handle, whether it''s in stick, spool or coil. It is quick and easy to install requiring fewer fittings, with no torch, flame, or solvent cement. NIBCO pecent PEX-c delivers clean, safe potable water because there are no toxic chemical additives in the material, no leaching of colors and there is no metal taste or odor. In addition, NIBCO pecent PEX-c is chlorine-resistant, corrosion-resistant, freeze-resistant and abrasion-resistant. The excellent thermal properties of PEX-c means hot water stays hot and cold water stays cold. In addition, the insulating properties of PEX-c eliminate the noise and vibration from water hammer. NIBCO pecent PEX-c tubing, fittings, valves, and manifolds are designed to be used as a complete system, and are backed by a NIBCO INC. limited warranty.

• Item ID: 70HV4PJ
• Width:
• Height:
• Finish: Terra Cotta
• Extra Data: NSF-pw, Pressure/temperature rating 100 psi at 180 degrees F, Pressure/temperature rating 160 psi at 73 degrees F, Pressure/temperature rating 80 psi at 200 degrees F
• Bullet10: CSA B137.5
• Bullet11: Certified by UPC
• Bullet12: SDR-9
• Bullet5: Complies with ASTM F876
• Bullet6: Complies with ASTM F877
• Bullet7: Complies with ASTM F1807
• Bullet8: Complies with ASTM F2159
• Bullet9: Complies with ASTM F2023
• Country: United States
• Description: PEX-c Tubing - Terra Cotta
• Finish Family: Designer Finishes
• Height: 8.50
• Install Link: Installation Link
• Length: 38
• Low Lead: LL Compliant NSF/ANSI 372
• MadeInUSA: US
• Material: Cross-Linked Polyethelyene
• Ship Weight: 250.5
• Shipping Height: 43
• Shipping Length: 38
• Shipping Width: 38
• Weight: 83.50
• Width: 38.00
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Parts

Item Description
NIBCO pecent PEX-c tubing is high density polyethylene cross-linked with the PEX-c sterile electron beam process. The environmentally friendly e-beam process creates the highest quality PEX-c tubing, which exhibits superior mechanical properties. NIBCO pecent PEX-c shape memory assures that the piping retains its round, straight tubal shape from the cross-link process. Yet it is pliable and easy to handle, whether it''s in stick, spool or coil. It is quick and easy to install requiring fewer fittings, with no torch, flame, or solvent cement. NIBCO pecent PEX-c delivers clean, safe potable water because there are no toxic chemical additives in the material, no leaching of colors and there is no metal taste or odor. In addition, NIBCO pecent PEX-c is chlorine-resistant, corrosion-resistant, freeze-resistant and abrasion-resistant. The excellent thermal properties of PEX-c means hot water stays hot and cold water stays cold. In addition, the insulating properties of PEX-c eliminate the noise and vibration from water hammer. NIBCO pecent PEX-c tubing, fittings, valves, and manifolds are designed to be used as a complete system, and are backed by a NIBCO INC. limited warranty.

• Item ID: 70HV5PD
• Width:
• Height:
• Finish: Terra Cotta
• Extra Data: NSF-pw, Pressure/temperature rating 100 psi at 180 degrees F, Pressure/temperature rating 160 psi at 73 degrees F, Pressure/temperature rating 80 psi at 200 degrees F
• Bullet10: CSA B137.5
• Bullet11: Certified by UPC
• Bullet12: SDR-9
• Bullet5: Complies with ASTM F876
• Bullet6: Complies with ASTM F877
• Bullet7: Complies with ASTM F1807
• Bullet8: Complies with ASTM F2159
• Bullet9: Complies with ASTM F2023
• Country: United States
• Description: PEX-c Tubing - Terra Cotta
• Finish Family: Designer Finishes
• Height: 1.13
• Install Link: Installation Link
• Length: 600
• Low Lead: LL Compliant NSF/ANSI 372
• MadeInUSA: US
• Material: Cross-Linked Polyethelyene
• Ship Weight: 125.25
• Shipping Height: 4.5
• Shipping Length: 600
• Shipping Width: 7
• Weight: 8.35
• Width: 1.13
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Parts

Item Description
NIBCO pecent PEX-c tubing is high density polyethylene cross-linked with the PEX-c sterile electron beam process. The environmentally friendly e-beam process creates the highest quality PEX-c tubing, which exhibits superior mechanical properties. NIBCO pecent PEX-c shape memory assures that the piping retains its round, straight tubal shape from the cross-link process. Yet it is pliable and easy to handle, whether it''s in stick, spool or coil. It is quick and easy to install requiring fewer fittings, with no torch, flame, or solvent cement. NIBCO pecent PEX-c delivers clean, safe potable water because there are no toxic chemical additives in the material, no leaching of colors and there is no metal taste or odor. In addition, NIBCO pecent PEX-c is chlorine-resistant, corrosion-resistant, freeze-resistant and abrasion-resistant. The excellent thermal properties of PEX-c means hot water stays hot and cold water stays cold. In addition, the insulating properties of PEX-c eliminate the noise and vibration from water hammer. NIBCO pecent PEX-c tubing, fittings, valves, and manifolds are designed to be used as a complete system, and are backed by a NIBCO INC. limited warranty.

• Item ID: 70HV3R6
• Width:
• Height:
• Finish: Blue
• Extra Data: NSF-pw, Pressure/temperature rating 100 psi at 180 degrees F, Pressure/temperature rating 160 psi at 73 degrees F, Pressure/temperature rating 80 psi at 200 degrees F
• Bullet10: CSA B137.5
• Bullet11: Certified by UPC
• Bullet12: SDR-9
• Bullet5: Complies with ASTM F876
• Bullet6: Complies with ASTM F877
• Bullet7: Complies with ASTM F1807
• Bullet8: Complies with ASTM F2159
• Bullet9: Complies with ASTM F2023
• Country: United States
• Description: PEX-c Tubing - Blue
• Finish Family: Solid Colors
• Height: 4.50
• Install Link: Installation Link
• Length: 32
• Low Lead: LL Compliant NSF/ANSI 372
• MadeInUSA: US
• Material: Cross-Linked Polyethelyene
• Ship Weight: 125.25
• Shipping Height: 43
• Shipping Length: 32
• Shipping Width: 32
• Weight: 41.75
• Width: 32.00
• Standard Finish: Blue
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Parts

Item Description
NIBCO pecent PEX-c tubing is high density polyethylene cross-linked with the PEX-c sterile electron beam process. The environmentally friendly e-beam process creates the highest quality PEX-c tubing, which exhibits superior mechanical properties. NIBCO pecent PEX-c shape memory assures that the piping retains its round, straight tubal shape from the cross-link process. Yet it is pliable and easy to handle, whether it''s in stick, spool or coil. It is quick and easy to install requiring fewer fittings, with no torch, flame, or solvent cement. NIBCO pecent PEX-c delivers clean, safe potable water because there are no toxic chemical additives in the material, no leaching of colors and there is no metal taste or odor. In addition, NIBCO pecent PEX-c is chlorine-resistant, corrosion-resistant, freeze-resistant and abrasion-resistant. The excellent thermal properties of PEX-c means hot water stays hot and cold water stays cold. In addition, the insulating properties of PEX-c eliminate the noise and vibration from water hammer. NIBCO pecent PEX-c tubing, fittings, valves, and manifolds are designed to be used as a complete system, and are backed by a NIBCO INC. limited warranty.

• Item ID: 70HV5NG
• Width:
• Height:
• Finish: White
• Extra Data: NSF-pw, Pressure/temperature rating 100 psi at 180 degrees F, Pressure/temperature rating 160 psi at 73 degrees F, Pressure/temperature rating 80 psi at 200 degrees F
• Bullet10: CSA B137.5
• Bullet11: Certified by UPC
• Bullet12: SDR-9
• Bullet5: Complies with ASTM F876
• Bullet6: Complies with ASTM F877
• Bullet7: Complies with ASTM F1807
• Bullet8: Complies with ASTM F2159
• Bullet9: Complies with ASTM F2023
• Country: United States
• Description: PEX-c Tubing - White
• Finish Family: White
• Height: 1.13
• Install Link: Installation Link
• Length: 600
• Low Lead: LL Compliant NSF/ANSI 372
• MadeInUSA: US
• Material: Cross-Linked Polyethelyene
• Ship Weight: 125.25
• Shipping Height: 4.5
• Shipping Length: 600
• Shipping Width: 7
• Weight: 8.35
• Width: 1.13
• Standard Finish: White
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Parts

Item Description
NIBCO pecent PEX-c tubing is high density polyethylene cross-linked with the PEX-c sterile electron beam process. The environmentally friendly e-beam process creates the highest quality PEX-c tubing, which exhibits superior mechanical properties. NIBCO pecent PEX-c shape memory assures that the piping retains its round, straight tubal shape from the cross-link process. Yet it is pliable and easy to handle, whether it''s in stick, spool or coil. It is quick and easy to install requiring fewer fittings, with no torch, flame, or solvent cement. NIBCO pecent PEX-c delivers clean, safe potable water because there are no toxic chemical additives in the material, no leaching of colors and there is no metal taste or odor. In addition, NIBCO pecent PEX-c is chlorine-resistant, corrosion-resistant, freeze-resistant and abrasion-resistant. The excellent thermal properties of PEX-c means hot water stays hot and cold water stays cold. In addition, the insulating properties of PEX-c eliminate the noise and vibration from water hammer. NIBCO pecent PEX-c tubing, fittings, valves, and manifolds are designed to be used as a complete system, and are backed by a NIBCO INC. limited warranty.

• Item ID: 70HV4PC
• Width:
• Height:
• Finish: Terra Cotta
• Extra Data: NSF-pw, Pressure/temperature rating 100 psi at 180 degrees F, Pressure/temperature rating 160 psi at 73 degrees F, Pressure/temperature rating 80 psi at 200 degrees F
• Bullet10: CSA B137.5
• Bullet11: Certified by UPC
• Bullet12: SDR-9
• Bullet5: Complies with ASTM F876
• Bullet6: Complies with ASTM F877
• Bullet7: Complies with ASTM F1807
• Bullet8: Complies with ASTM F2159
• Bullet9: Complies with ASTM F2023
• Country: United States
• Description: PEX-c Tubing - Terra Cotta
• Finish Family: Designer Finishes
• Height: 4.50
• Install Link: Installation Link
• Length: 32
• Low Lead: LL Compliant NSF/ANSI 372
• MadeInUSA: US
• Material: Cross-Linked Polyethelyene
• Ship Weight: 175
• Shipping Height: 43
• Shipping Length: 32
• Shipping Width: 32
• Weight: 35.00
• Width: 32.00
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Parts

Item Description
NIBCO pecent PEX-c tubing is high density polyethylene cross-linked with the PEX-c sterile electron beam process. The environmentally friendly e-beam process creates the highest quality PEX-c tubing, which exhibits superior mechanical properties. NIBCO pecent PEX-c shape memory assures that the piping retains its round, straight tubal shape from the cross-link process. Yet it is pliable and easy to handle, whether it''s in stick, spool or coil. It is quick and easy to install requiring fewer fittings, with no torch, flame, or solvent cement. NIBCO pecent PEX-c delivers clean, safe potable water because there are no toxic chemical additives in the material, no leaching of colors and there is no metal taste or odor. In addition, NIBCO pecent PEX-c is chlorine-resistant, corrosion-resistant, freeze-resistant and abrasion-resistant. The excellent thermal properties of PEX-c means hot water stays hot and cold water stays cold. In addition, the insulating properties of PEX-c eliminate the noise and vibration from water hammer. NIBCO pecent PEX-c tubing, fittings, valves, and manifolds are designed to be used as a complete system, and are backed by a NIBCO INC. limited warranty.

• Item ID: 70HV4PH
• Width:
• Height:
• Finish: Terra Cotta
• Extra Data: NSF-pw, Pressure/temperature rating 100 psi at 180 degrees F, Pressure/temperature rating 160 psi at 73 degrees F, Pressure/temperature rating 80 psi at 200 degrees F
• Bullet10: CSA B137.5
• Bullet11: Certified by UPC
• Bullet12: SDR-9
• Bullet5: Complies with ASTM F876
• Bullet6: Complies with ASTM F877
• Bullet7: Complies with ASTM F1807
• Bullet8: Complies with ASTM F2159
• Bullet9: Complies with ASTM F2023
• Country: United States
• Description: PEX-c Tubing - Terra Cotta
• Finish Family: Designer Finishes
• Height: 8.50
• Install Link: Installation Link
• Length: 38
• Low Lead: LL Compliant NSF/ANSI 372
• MadeInUSA: US
• Material: Cross-Linked Polyethelyene
• Ship Weight: 140
• Shipping Height: 43
• Shipping Length: 38
• Shipping Width: 38
• Weight: 70.00
• Width: 38.00
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Parts

Item Description
NIBCO pecent PEX-c tubing is high density polyethylene cross-linked with the PEX-c sterile electron beam process. The environmentally friendly e-beam process creates the highest quality PEX-c tubing, which exhibits superior mechanical properties. NIBCO pecent PEX-c shape memory assures that the piping retains its round, straight tubal shape from the cross-link process. Yet it is pliable and easy to handle, whether it''s in stick, spool or coil. It is quick and easy to install requiring fewer fittings, with no torch, flame, or solvent cement. NIBCO pecent PEX-c delivers clean, safe potable water because there are no toxic chemical additives in the material, no leaching of colors and there is no metal taste or odor. In addition, NIBCO pecent PEX-c is chlorine-resistant, corrosion-resistant, freeze-resistant and abrasion-resistant. The excellent thermal properties of PEX-c means hot water stays hot and cold water stays cold. In addition, the insulating properties of PEX-c eliminate the noise and vibration from water hammer. NIBCO pecent PEX-c tubing, fittings, valves, and manifolds are designed to be used as a complete system, and are backed by a NIBCO INC. limited warranty.

• Item ID: 70HV5PC
• Width:
• Height:
• Finish: Terra Cotta
• Extra Data: NSF-pw, Pressure/temperature rating 100 psi at 180 degrees F, Pressure/temperature rating 160 psi at 73 degrees F, Pressure/temperature rating 80 psi at 200 degrees F
• Bullet10: CSA B137.5
• Bullet11: Certified by UPC
• Bullet12: SDR-9
• Bullet5: Complies with ASTM F876
• Bullet6: Complies with ASTM F877
• Bullet7: Complies with ASTM F1807
• Bullet8: Complies with ASTM F2159
• Bullet9: Complies with ASTM F2023
• Country: United States
• Description: PEX-c Tubing - Terra Cotta
• Finish Family: Designer Finishes
• Height: 4.50
• Install Link: Installation Link
• Length: 30
• Low Lead: LL Compliant NSF/ANSI 372
• MadeInUSA: US
• Material: Cross-Linked Polyethelyene
• Ship Weight: 92.5
• Shipping Height: 43
• Shipping Length: 30
• Shipping Width: 30
• Weight: 4.17
• Width: 30.00
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Parts

Item Description
NIBCO pecent PEX-c tubing is high density polyethylene cross-linked with the PEX-c sterile electron beam process. The environmentally friendly e-beam process creates the highest quality PEX-c tubing, which exhibits superior mechanical properties. NIBCO pecent PEX-c shape memory assures that the piping retains its round, straight tubal shape from the cross-link process. Yet it is pliable and easy to handle, whether it''s in stick, spool or coil. It is quick and easy to install requiring fewer fittings, with no torch, flame, or solvent cement. NIBCO pecent PEX-c delivers clean, safe potable water because there are no toxic chemical additives in the material, no leaching of colors and there is no metal taste or odor. In addition, NIBCO pecent PEX-c is chlorine-resistant, corrosion-resistant, freeze-resistant and abrasion-resistant. The excellent thermal properties of PEX-c means hot water stays hot and cold water stays cold. In addition, the insulating properties of PEX-c eliminate the noise and vibration from water hammer. NIBCO pecent PEX-c tubing, fittings, valves, and manifolds are designed to be used as a complete system, and are backed by a NIBCO INC. limited warranty.

• Item ID: 70HV3QN
• Width:
• Height:
• Finish: Red
• Extra Data: NSF-pw, Pressure/temperature rating 100 psi at 180 degrees F, Pressure/temperature rating 160 psi at 73 degrees F, Pressure/temperature rating 80 psi at 200 degrees F
• Bullet10: CSA B137.5
• Bullet11: Certified by UPC
• Bullet12: SDR-9
• Bullet5: Complies with ASTM F876
• Bullet6: Complies with ASTM F877
• Bullet7: Complies with ASTM F1807
• Bullet8: Complies with ASTM F2159
• Bullet9: Complies with ASTM F2023
• Country: United States
• Description: PEX-c Tubing - Red
• Finish Family: Solid Colors
• Height: 18.00
• Install Link: Installation Link
• Length: 38
• Low Lead: LL Compliant NSF/ANSI 372
• MadeInUSA: US
• Material: Cross-Linked Polyethelyene
• Ship Weight: 551
• Shipping Height: 43
• Shipping Length: 38
• Shipping Width: 38
• Weight: 167.00
• Width: 38.00
• Standard Finish: Red
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Parts

Item Description
NIBCO pecent PEX-c tubing is high density polyethylene cross-linked with the PEX-c sterile electron beam process. The environmentally friendly e-beam process creates the highest quality PEX-c tubing, which exhibits superior mechanical properties. NIBCO pecent PEX-c shape memory assures that the piping retains its round, straight tubal shape from the cross-link process. Yet it is pliable and easy to handle, whether it''s in stick, spool or coil. It is quick and easy to install requiring fewer fittings, with no torch, flame, or solvent cement. NIBCO pecent PEX-c delivers clean, safe potable water because there are no toxic chemical additives in the material, no leaching of colors and there is no metal taste or odor. In addition, NIBCO pecent PEX-c is chlorine-resistant, corrosion-resistant, freeze-resistant and abrasion-resistant. The excellent thermal properties of PEX-c means hot water stays hot and cold water stays cold. In addition, the insulating properties of PEX-c eliminate the noise and vibration from water hammer. NIBCO pecent PEX-c tubing, fittings, valves, and manifolds are designed to be used as a complete system, and are backed by a NIBCO INC. limited warranty.

• Item ID: 70HV4TA
• Width:
• Height:
• Finish: White
• Extra Data: NSF-pw, Pressure/temperature rating 100 psi at 180 degrees F, Pressure/temperature rating 160 psi at 73 degrees F, Pressure/temperature rating 80 psi at 200 degrees F
• Bullet10: CSA B137.5
• Bullet11: Certified by UPC
• Bullet12: SDR-9
• Bullet5: Complies with ASTM F876
• Bullet6: Complies with ASTM F877
• Bullet7: Complies with ASTM F1807
• Bullet8: Complies with ASTM F2159
• Bullet9: Complies with ASTM F2023
• Country: United States
• Description: PEX-c Tubing - White
• Finish Family: White
• Height: 1.13
• Install Link: Installation Link
• Length: 480
• Low Lead: LL Compliant NSF/ANSI 372
• MadeInUSA: US
• Material: Cross-Linked Polyethelyene
• Ship Weight: 105
• Shipping Height: 4.5
• Shipping Length: 480
• Shipping Width: 7
• Weight: 7.00
• Width: 1.13
• Standard Finish: White
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Parts

Item Description
NIBCO pecent PEX-c tubing is high density polyethylene cross-linked with the PEX-c sterile electron beam process. The environmentally friendly e-beam process creates the highest quality PEX-c tubing, which exhibits superior mechanical properties. NIBCO pecent PEX-c shape memory assures that the piping retains its round, straight tubal shape from the cross-link process. Yet it is pliable and easy to handle, whether it''s in stick, spool or coil. It is quick and easy to install requiring fewer fittings, with no torch, flame, or solvent cement. NIBCO pecent PEX-c delivers clean, safe potable water because there are no toxic chemical additives in the material, no leaching of colors and there is no metal taste or odor. In addition, NIBCO pecent PEX-c is chlorine-resistant, corrosion-resistant, freeze-resistant and abrasion-resistant. The excellent thermal properties of PEX-c means hot water stays hot and cold water stays cold. In addition, the insulating properties of PEX-c eliminate the noise and vibration from water hammer. NIBCO pecent PEX-c tubing, fittings, valves, and manifolds are designed to be used as a complete system, and are backed by a NIBCO INC. limited warranty.

• Item ID: 70HV4PG
• Width:
• Height:
• Finish: Terra Cotta
• Extra Data: NSF-pw, Pressure/temperature rating 100 psi at 180 degrees F, Pressure/temperature rating 160 psi at 73 degrees F, Pressure/temperature rating 80 psi at 200 degrees F
• Bullet10: CSA B137.5
• Bullet11: Certified by UPC
• Bullet12: SDR-9
• Bullet5: Complies with ASTM F876
• Bullet6: Complies with ASTM F877
• Bullet7: Complies with ASTM F1807
• Bullet8: Complies with ASTM F2159
• Bullet9: Complies with ASTM F2023
• Country: United States
• Description: PEX-c Tubing - Terra Cotta
• Finish Family: Designer Finishes
• Height: 8.50
• Install Link: Installation Link
• Length: 34
• Low Lead: LL Compliant NSF/ANSI 372
• MadeInUSA: US
• Material: Cross-Linked Polyethelyene
• Ship Weight: 133
• Shipping Height: 43
• Shipping Length: 38
• Shipping Width: 38
• Weight: 66.50
• Width: 34.00
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Parts

Item Description
NIBCO pecent PEX-c tubing is high density polyethylene cross-linked with the PEX-c sterile electron beam process. The environmentally friendly e-beam process creates the highest quality PEX-c tubing, which exhibits superior mechanical properties. NIBCO pecent PEX-c shape memory assures that the piping retains its round, straight tubal shape from the cross-link process. Yet it is pliable and easy to handle, whether it''s in stick, spool or coil. It is quick and easy to install requiring fewer fittings, with no torch, flame, or solvent cement. NIBCO pecent PEX-c delivers clean, safe potable water because there are no toxic chemical additives in the material, no leaching of colors and there is no metal taste or odor. In addition, NIBCO pecent PEX-c is chlorine-resistant, corrosion-resistant, freeze-resistant and abrasion-resistant. The excellent thermal properties of PEX-c means hot water stays hot and cold water stays cold. In addition, the insulating properties of PEX-c eliminate the noise and vibration from water hammer. NIBCO pecent PEX-c tubing, fittings, valves, and manifolds are designed to be used as a complete system, and are backed by a NIBCO INC. limited warranty.

• Item ID: 70HV3RY
• Width:
• Height:
• Finish: White
• Extra Data: NSF-pw, Pressure/temperature rating 100 psi at 180 degrees F, Pressure/temperature rating 160 psi at 73 degrees F, Pressure/temperature rating 80 psi at 200 degrees F
• Bullet10: CSA B137.5
• Bullet11: Certified by UPC
• Bullet12: SDR-9
• Bullet5: Complies with ASTM F876
• Bullet6: Complies with ASTM F877
• Bullet7: Complies with ASTM F1807
• Bullet8: Complies with ASTM F2159
• Bullet9: Complies with ASTM F2023
• Country: United States
• Description: PEX-c Tubing - White
• Finish Family: White
• Height: 4.50
• Install Link: Installation Link
• Length: 32
• Low Lead: LL Compliant NSF/ANSI 372
• MadeInUSA: US
• Material: Cross-Linked Polyethelyene
• Ship Weight: 175
• Shipping Height: 43
• Shipping Length: 32
• Shipping Width: 32
• Weight: 35.00
• Width: 32.00
• Standard Finish: White
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Parts

Item Description
NIBCO pecent PEX-c tubing is high density polyethylene cross-linked with the PEX-c sterile electron beam process. The environmentally friendly e-beam process creates the highest quality PEX-c tubing, which exhibits superior mechanical properties. NIBCO pecent PEX-c shape memory assures that the piping retains its round, straight tubal shape from the cross-link process. Yet it is pliable and easy to handle, whether it''s in stick, spool or coil. It is quick and easy to install requiring fewer fittings, with no torch, flame, or solvent cement. NIBCO pecent PEX-c delivers clean, safe potable water because there are no toxic chemical additives in the material, no leaching of colors and there is no metal taste or odor. In addition, NIBCO pecent PEX-c is chlorine-resistant, corrosion-resistant, freeze-resistant and abrasion-resistant. The excellent thermal properties of PEX-c means hot water stays hot and cold water stays cold. In addition, the insulating properties of PEX eliminate the noise and vibration from water hammer. NIBCO pecent PEX-c tubing, fittings, valves, and manifolds are designed to be used as a complete system, and are backed by a NIBCO INC. limited warranty.

• Item ID: 70HV4RG
• Width:
• Height:
• Finish: Blue
• Extra Data: NSF-pw, Pressure/temperature rating 100 psi at 180 degrees F, Pressure/temperature rating 160 psi at 73 degrees F, Pressure/temperature rating 80 psi at 200 degrees F
• Bullet10: CSA B137.5
• Bullet11: Certified by UPC
• Bullet12: SDR-9
• Bullet5: Complies with ASTM F876
• Bullet6: Complies with ASTM F877
• Bullet7: Complies with ASTM F1807
• Bullet8: Complies with ASTM F2159
• Bullet9: Complies with ASTM F2023
• Country: United States
• Description: PEX-c Tubing - Blue
• Finish Family: Solid Colors
• Install Link: Installation Link
• Low Lead: LL Compliant NSF/ANSI 372
• MadeInUSA: US
• Material: Cross-Linked Polyethelyene
• Ship Weight: 168
• Shipping Height: 0
• Shipping Length: 0
• Shipping Width: 0
• Weight: 0.17
• Standard Finish: Blue
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Parts

Item Description
NIBCO pecent PEX-c tubing is high density polyethylene cross-linked with the PEX-c sterile electron beam process. The environmentally friendly e-beam process creates the highest quality PEX-c tubing, which exhibits superior mechanical properties. NIBCO pecent PEX-c shape memory assures that the piping retains its round, straight tubal shape from the cross-link process. Yet it is pliable and easy to handle, whether it''s in stick, spool or coil. It is quick and easy to install requiring fewer fittings, with no torch, flame, or solvent cement. NIBCO pecent PEX-c delivers clean, safe potable water because there are no toxic chemical additives in the material, no leaching of colors and there is no metal taste or odor. In addition, NIBCO pecent PEX-c is chlorine-resistant, corrosion-resistant, freeze-resistant and abrasion-resistant. The excellent thermal properties of PEX-c means hot water stays hot and cold water stays cold. In addition, the insulating properties of PEX-c eliminate the noise and vibration from water hammer. NIBCO pecent PEX-c tubing, fittings, valves, and manifolds are designed to be used as a complete system, and are backed by a NIBCO INC. limited warranty.

• Item ID: 70HV3R9
• Width:
• Height:
• Finish: Blue
• Extra Data: NSF-pw, Pressure/temperature rating 100 psi at 180 degrees F, Pressure/temperature rating 160 psi at 73 degrees F, Pressure/temperature rating 80 psi at 200 degrees F
• Bullet10: CSA B137.5
• Bullet11: Certified by UPC
• Bullet12: SDR-9
• Bullet5: Complies with ASTM F876
• Bullet6: Complies with ASTM F877
• Bullet7: Complies with ASTM F1807
• Bullet8: Complies with ASTM F2159
• Bullet9: Complies with ASTM F2023
• Country: United States
• Description: PEX-c Tubing - Blue
• Finish Family: Solid Colors
• Height: 12.00
• Install Link: Installation Link
• Length: 38
• Low Lead: LL Compliant NSF/ANSI 372
• MadeInUSA: US
• Material: Cross-Linked Polyethelyene
• Ship Weight: 501
• Shipping Height: 43
• Shipping Length: 38
• Shipping Width: 38
• Weight: 125.25
• Width: 38.00
• Standard Finish: Blue
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Parts

Item Description
NIBCO® PEX fittings are lightweight, easy to install and maintenance-free. Joining can be accomplished with NIBCO copper crimp ring, copper sleeves, or stainless steel sleeves. The NIBCO® PEX system requires fewer fittings than traditional rigid plumbing systems resulting in fewer potential leak paths. NIBCO® PEX tubing, fittings, valves, and manifolds are designed to be used as a complete system, and are backed by a NIBCO INC. limited warranty.

• Item ID: 70HV1V9
• Width:
• Height:
• Extra Data: Complies with ASTM F877, Maximum service temperature 200°F
• Country: IT
• Description: Crimp Sleeve - Stainless Steel
• Height: 0.800
• Length: 1.190
• Material: Stainless Steel
• Minimum Order Quantity: 50
• Ship Weight: 37.5
• Shipping Height: 12
• Shipping Length: 23
• Shipping Width: 16
• UOM: Each
• Weight: 0.01
• Width: 1.200
• Standard Plumbing Category: Plumbing Supplies
• Standard Plumbing Subcategory: Parts