Item Description
The NIBCO pecent bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The PTFE seat ring and brass hard chrome plated ball exhibits high chemical resistance properties and is recommended for many high pressure applications. The three-piece valve features threaded ends for easy installation. Options include NIB-SEAL pecent insulated handle that eliminates condensate. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO pecent ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO pecent ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8WT9
Width:
Height:
Extra Data: Blowout-proof stem, Full port, Maximum temperature rating 400 Degrees F, Valve pressure rating 175 psi 12.1 bar non-shock LP gas per UL842
Bullet6: Standard lever handle, optional NIB-SEAL pecent
Bullet7: Solder end connections
Bullet8: Dezincification resistant
Bullet9: Use in U.S. drinking water applications is prohibited after January 3, 2014
Country: United States
Description: Three-Piece Bronze Ball Valve - Full Port, Solder Ends, UL Listed Flammable Liquids
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
MadeInUSA: Yes
Material: Bronze
Prop65: WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in EPDM seat liner with stainless steel disc is recommended for chemical applications the liner compatibility will permit. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMUMD
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Valve pressure rating 250 psi, Wafer style
AltImageName1: /NBC/WD30223.jpg
AltImageName2: /NBC/WD30223.jpg
AltImagePath1: /NBC-WD30223.JPEG
AltImagePath2: /NBC-WD30223.JPEG
Bullet10: Not recommended for steam service
Bullet5: Stainless steel disc
Bullet6: Stainless steel stem with stainless steel bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The F739 Series Ductile Iron fixed orifice manual balancing valve is complete with integral pressure temperature ports and memory stop. Special calculators or meters are not required to set the F739. Direct system readings are taken across the orifice. Depending on size, the F739 Series provides between 2880 to 6480 -degrees of throttling adjustment, resulting in precise setting of system flow. The F739 is also capable of providing system isolation for maintenance. The integral memory stop feature allows the system to be returned to its retained settings once maintenance is completed. The NIBCO® manual balancing valves provide the ultimate solution for a wide range of mechanical and HVAC chilled and hot water application requirements to ensure a balanced system and a comfortable indoor climate. NIBCO® valves and components are also backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HQZ5W
Width:
Height:
Extra Data: Durable ductile iron body and bonnet, EPDM coated disc, Maximum temperature rating 250°F at 175 psi, Rated at 230 PSI Non Shock Cold Working Pressure
Bullet5: Integral internal memory stop
Bullet6: PTFE + EPDM stem seal
Bullet7: Flanged end connections
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve features a unique molded-in Buna-N seat liner with ductile iron, electro nickel plated disc, recommended for most water applications. The internal stem/disc geometric drive design eliminates the need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJWVA
Width:
Height:
Extra Data: Buna-N molded-in seat liner, Lug style, Maximum 180°F service, Valve pressure rating 100 psi
AltImageName1: /NBC/LD31103.jpg
AltImageName2: /NBC/LD31103.jpg
AltImagePath1: /NBC-LD31103.JPEG
AltImagePath2: /NBC-LD31103.JPEG
Bullet10: Not recommended for steam service
Bullet5: Nickel electroplated ductile iron disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem for use with pneumatic or electric actuators
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique molded-in Buna-N seat liner with aluminum bronze disc provides good abrasion resistance properties and compatibility with solvents, oil, water and hydraulic fluid for compressed air and vacuum applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJVVP
Width:
Height:
Extra Data: Buna-N molded-in seat liner, Lug style, Max temperature rating 180°F, Valve pressure rating 200 psi
AltImageName1: /NBC/LD20003.jpg
AltImageName2: /NBC/LD20003.jpg
AltImagePath1: /NBC-LD20003.JPEG
AltImagePath2: /NBC-LD20003.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique Buna-N molded-in seat liner with stainless steel disc is recommended for chemical applications the liner compatibility will permit. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMVLT
Width:
Height:
Extra Data: Buna-N molded-in seat liner, Maximum 180°F service, Valve pressure rating 250 psi, Wafer style
AltImageName1: /NBC/WD30223.jpg
AltImageName2: /NBC/WD30223.jpg
AltImagePath1: /NBC-WD30223.JPEG
AltImagePath2: /NBC-WD30223.JPEG
Bullet10: Not recommended for steam service
Bullet5: Stainless steel disc
Bullet6: Stainless steel stem with stainless steel bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron lug butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design, there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in EPDM seat liner with aluminum bronze disc is recommended for most water applications. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJUX3
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Lug style, Valve pressure rating 200 psi
AltImageName1: /NBC/LD20003.jpg
AltImageName2: /NBC/LD20003.jpg
AltImagePath1: /NBC-LD20003.JPEG
AltImagePath2: /NBC-LD20003.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO engineers have redesigned the top works of the valve to make it easier to install and service. The stem is triple sealed with double O-rings and PTFE packing. The easily accessible, large pack nut can be tightened without removing the handle or using a special wrench. This also allows for the packing to be replaced and serviced. The handle is reversible without disconnecting the valve.585HP ball valve features press ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. When performance matters, choose the NIBCO® 585HP ball valves for the most advanced and versatile valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the industry leading NIBCO INC. 10-year 125% limited warranty.
Item ID: 70TX147
Width:
Height:
Extra Data: Copper-to-copper connections, Full port, Maximum service temperature 250°F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Silicon Performance Bronze® Body, Ball and Stem, Optional Stainless Steel Trim
Bullet5: Laser Welded
Bullet6: Reversible Handle
Bullet7: Easily Adjustable Pack Nut
Bullet8: Triple Sealed Stem
Bullet9: Blowout-proof Stem
Country: US
Description: NEEDS Z FAMILY CREATED BEFORE MARKETING FAMILY
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC.; Performance Bronze pecent is a registered trademark of NIBCO INC.
Height: 2.940
Length: 7.010
MadeInUSA: Yes
Material: Lead-Free Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve features a Buna-N encapsulated ductile iron disc. The internal stem/disc splined drive design eliminates the need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HN1EG
Width:
Height:
Extra Data: Buna-N encapsulated ductile iron disc, Grooved style, Max temperature rating 180°F, Valve pressure rating 300 psi (2" to 10"); 200 psi (12" only)
AltImageName1: /NBC/GD47653.jpg
AltImageName2: /NBC/GD47653.jpg
AltImagePath1: /NBC-GD47653.JPEG
AltImagePath2: /NBC-GD47653.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Stainless steel stem with metal bushings
Bullet6: Splined drive
Bullet7: Extended neck
Bullet8: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® lead-free brass ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded end connections for easy installation. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO® specialty valves are backed by a NIBCO INC. 2-year limited warranty.
Item ID: 70HFZ28
Width:
Height:
Extra Data: Blowout-proof stem, Full port, Valve pressure rating 400 psi/27.6 bar non-shock cold working pressure (2-1/2" to 4"), Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure (1/4" to 2")
AltImageName1: /NBC/TFP600A-LF.jpg
AltImageName2: /NBC/TFP600A-LF.jpg
AltImagePath1: /NBC-TFP600A-LF.JPEG
AltImagePath2: /NBC-TFP600A-LF.JPEG
Bullet10: CSA ASME B16.33: 125 psig (maximum) (1/4" to 4")
Bullet5: Standard lever handle
Bullet6: Threaded end connections
Bullet7: IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
Bullet8: CSA ANSI Z21.15 / CSA 9.1 (1/4" to 4")
Bullet9: CSA ASME B16.44: 5 psig (maximum) (1/4" to 4")
Country: CN
Description: Ball Valve - Lead-Free* Brass, Two-Piece, Full Port, NPT x NPT
Height: 6.460
Length: 13.300
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Coil-Connect® Kit NCC3S is prepackaged to include an S-1880 automatic balancing valve, S-1830 combination isolation ball valve with drain, and an S-1800 union with PT port installed. Flexible braided stainless steel hoses are optional and are available in 3 standard lengths. Please refer to NIBCO technical data sheets and IOM Manuals for engineering and installation information. Whether a system is designed for heating, cooling or water distribution, it must be properly adjusted and balanced for optimum performance. A balanced system ensures a comfortable indoor climate. Choose NIBCO FLO-BOSS CoilConnect Kits and accessories for the most versatile and economical option in commercial HVAC and mechanical system applications. NIBCO FLO-BOSS Coil-Connect components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707H3EX
Width:
Height:
Extra Data: Individually packaged and labeled, Kit can be marked and tagged per contractor requirements, Packaged in recyclable heavy duty poly bags, Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve features an EPDM encapsulated ductile iron disc. The internal stem/disc splined drive design eliminates the need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HN0GQ
Width:
Height:
Extra Data: EPDM encapsulated ductile iron disc, Splined drive, Stainless steel stem with metal bushings, Valve pressure rating 300 psi wwp
AltImageName1: /NBC/GD47653;GD4765-5.jpg
AltImageName2: /NBC/GD47653;GD4765-5.jpg
AltImagePath1: /NBC-GD47653;GD4765-5.JPEG
AltImagePath2: /NBC-GD47653;GD4765-5.JPEG
Bullet10: MSS SP-25 (markings)
Bullet5: Extended neck for up to 2” of insulation
Bullet6: Operating mechanism: bare stem, lever lock and manual gear operator
Bullet7: Not recommended for steam service
Bullet8: NSF/ANSI/CAN-61 and 372
Bullet9: Designed to meet MSS SP-67
Country: US
Description: The NIBCO ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve features an EPDM encapsulated ductile iron disc. The internal stem/disc splined drive design eliminates the need for pins or bolts tha
Height: 5.860
Length: 13.640
MadeInUSA: Yes
Material: Ductile Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO® FLO-BOSS® Automatic Balancing Valves are constructed with dezincification resistant materials. This unique valve design provides finite control through a wide range of flow cartridges. Please refer to NIBCO technical data sheets and IOM Manuals for engineering and installation information. Whether a system is designed for heating, cooling or water distribution, it must be properly adjusted and balanced for optimum performance. A balanced system ensures a comfortable indoor climate. Choose NIBCO® Coil-Connect® valves, fittings and accessories for the most specified, versatile and economical option in commercial HVAC and mechanical applications. NIBCO® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HQW8X
Width:
Height:
Extra Data: 200 psi non-shock cold working pressure, DZR Brass body and tail pieces, Maximum temperature rating 250°F at 150 psi, Regulating cartridge DZR Brass and Stainless Steel
AltImageName1: /NBC/TPC1880.jpg
AltImageName2: /NBC/TPC1880.jpg
AltImagePath1: /NBC-TPC1880.JPEG
AltImagePath2: /NBC-TPC1880.JPEG
Bullet5: EPDM O-rings
Bullet6: Threaded x Press Ends
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: FLO-BOSS® A
Country: US
Description: Balancing Valve - Automatic, Threaded x Press Ends
Height: 2.910
Length: 8.460
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® gate valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCQJY
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Non-rising stem, Solid wedge
Bullet5: Screw-in bonnet
Bullet6: Class 125 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Dezincification resistant
Bullet9: Conforms to MSS SP-80
Country: US
Description: The NIBCO bronze gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides an
Height: 5.380
Length: 12.380
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Coil-Connect® Kit NCC3T is prepackaged to include a T-1880 automatic balancing valve, T-1830 combination isolation ball valve with drain, and a T-1800 union with PT port installed. Flexible braided stainless steel hoses are optional and are available in 3 standard lengths. Please refer to NIBCO technical data sheets and IOM Manuals for engineering and installation information. Whether a system is designed for heating, cooling or water distribution, it must be properly adjusted and balanced for optimum performance. A balanced system ensures a comfortable indoor climate. Choose NIBCO FLO-BOSS Coil-Connect Kits and accessories for the most versatile and economical option in commercial HVAC and mechanical system applications. NIBCO FLO-BOSS Coil-Connect components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707H3F3
Width:
Height:
Extra Data: Individually packaged and labeled, Kit can be marked and tagged per contractor requirements, Packaged in recyclable heavy duty poly bags, Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valves provide ease of operation with quarter-turn (90 degrees) open to close. The unique molded-in Buna-N seat liner with aluminum bronze disc provides good abrasion resistance properties and compatibility with solvents, oil, water and hydraulic fluid for compressed air and vacuum applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMWKM
Width:
Height:
Extra Data: Buna-N molded-in seat liner, Maximum 180°F service, Valve pressure rating 250 psi, Wafer style
AltImageName1: /NBC/WD20003.jpg
AltImageName2: /NBC/WD20003.jpg
AltImagePath1: /NBC-WD20003.JPEG
AltImagePath2: /NBC-WD20003.JPEG
Bullet10: Not recommended for steam service
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® Press System is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. The two-piece valve is recommended for many applications, including HVAC, hot and cold water, and non-potable process water. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO® Press System features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. NIBCO® Press System valves are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707KY89
Width:
Height:
Extra Data: Bronze trim blowout-proof stem, Full port, Maximum service temperature 250°F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet5: Reinforced PTFE seat rings
Bullet6: Threaded x press female end connections
Bullet7: Press leak-detection feature
Bullet8: Lever handle
Bullet9: Dezincification resistant
Country: US
Description: Ball Valve - Bronze, 250 PSI, Full Port, Thread x Press Ends
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC.
Height: 3.690
Length: 11.160
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique molded-in EPDM seat liner with aluminum bronze disc is recommended for most water applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMWJY
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Valve pressure rating 250 psi, Wafer style
AltImageName1: /NBC/WD20003.jpg
AltImageName2: /NBC/WD20003.jpg
AltImagePath1: /NBC-WD20003.JPEG
AltImagePath2: /NBC-WD20003.JPEG
Bullet10: Not recommended for steam service
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO engineers have redesigned the top works of the valve to make it easier to install and service. The stem is triple sealed with double O-rings and PTFE packing. The easily accessible, large pack nut can be tightened without removing the handle or using a special wrench. This also allows for the packing to be replaced and serviced. The handle is reversible without disconnecting the valve.585HP ball valve features press ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. When performance matters, choose the NIBCO® 585HP ball valves for the most advanced and versatile valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the industry leading NIBCO INC. 10-year 125% limited warranty.
Item ID: 70TX21A
Width:
Height:
Extra Data: Copper-to-copper connections, Full port, Maximum service temperature 250°F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Silicon Performance Bronze® Body, Ball and Stem, Optional Stainless Steel Trim
Bullet5: Laser Welded
Bullet6: Reversible Handle
Bullet7: Easily Adjustable Pack Nut
Bullet8: Triple Sealed Stem
Bullet9: Blowout-proof Stem
Country: US
Description: NEEDS Z FAMILY CREATED BEFORE MARKETING FAMILY
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC.; Performance Bronze pecent is a registered trademark of NIBCO INC.
Height: 2.840
Length: 9.520
Made to Order: Yes
MadeInUSA: Yes
Material: Lead-Free Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve features a multi-turn operator which is equipped with internal monitor switches to prevent tampering. These valves are typically used on automatic fire sprinkler system, as the floor control valve. The valve is listed by UL for use indoor and outdoor service. The two-piece valve features threaded end connections for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical, fire protection and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HCYDT
Width:
Height:
Extra Data: 300 psi/20.7 bar non-shock water working pressure (WWP), Blowout-proof stem, Full port 1" to 2", Standard port 2-1/2"
Bullet10: Conforms to MSS SP-110
Bullet5: Chrome plated brass ball and silicon bronze stem
Bullet6: Multi-turn actuator
Bullet7: Threaded end connections
Bullet8: Dezincification resistant
Bullet9: Use in U.S. drinking water applications is prohibited after January 3, 2014
Country: US
Description: Two-Piece Bronze Ball Valve - Fire Protection, Threaded Ends
Height: 4.670
Length: 6.330
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® lead-free brass ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded end connections for easy installation. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO® specialty valves are backed by a NIBCO INC. 2-year limited warranty.
Item ID: 70HFZ26
Width:
Height:
Extra Data: Blowout-proof stem, Full port, Valve pressure rating 400 psi/27.6 bar non-shock cold working pressure (2-1/2" to 4"), Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure (1/4" to 2")
Bullet10: CSA ASME B16.33: 125 psig (maximum) (1/4" to 4")
Bullet5: Standard lever handle
Bullet6: Threaded end connections
Bullet7: IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
Bullet8: CSA ANSI Z21.15 / CSA 9.1 (1/4" to 4")
Bullet9: CSA ASME B16.44: 5 psig (maximum) (1/4" to 4")
Country: CN
Description: Ball Valve - Lead-Free* Brass, Two-Piece, Full Port, NPT x NPT
Height: 4.330
Length: 11.350
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
For automated or computer-controlled flow control systems, NIBCO electric actuators offer exceptional convenience and flexibility. Ideal for applications where the valve is not readily accessible, the actuators provide a labor-saving alternative to manual flow control regulation. These electric actuators and control devices are recommended for use in industrial process and commercial control applications. Please refer to NIBCO technical data sheets, valve selection guides and catalog for engineering and installation information. Engineered with a modular approach, NIBCO® electric actuation systems offer the flexibility to actuate new valves or to retrofit existing valves with unprecedented ease. Electric actuation systems feature an ISO standard mounting design, assuring long-term industry acceptance. Choose NIBCO® flow control products for the most specified, versatile and economical option in commercial and industrial applications. NIBCO® actuation products are backed by the NIBCO limited warranty.
Item ID: 70U6622
Width:
Height:
Extra Data: 2, 10, and 13 second cycle, 2-second cycle models have unidirectional operation and mechanical brake, Permanently lubricated gear train, Stainless steel output drive
Bullet10: Enclosures CSA certified to NEMA 1, 2, 3, 3R, 4, 4X and 5
Bullet5: 10 and 13 second cycle models have single phase capacitor run motors with internal brake
Bullet6: Single 1/2" NPT conduit entrance
Bullet7: Temperature range -40°F to +140°F
Bullet8: Voltage 110 VAC
Bullet9: Torque 100-350 in/lb
Country: US
Description: Electric Actuators - NEMA 1-5, 110 VAC
Height: 5.250
Length: 7.500
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® carbon steel ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The reinforced PTFE 15% glass seat ring, Graphite stem packing and stainless steel ball/stem exhibits high chemical resistance properties and is recommended for process piping. The valve also features an enclosed bolt design. This valve features a standard lockable lever handle for security purposes. It may be used for isolation and throttling (half open to full open only). Please refer to NIBCO technical data sheets, valve selection guides, chemical resistance guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and industrial applications. NIBCO® ball valves are backed by the exclusive NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFX3R
Width:
Height:
Extra Data: Blowout-proof stem, Conventional port, Maximum temperature rating 400°F, Valve pressure rating 2000 psi 138 bar non-shock cold working pressure
Bullet10: Cast ISO mounting pad
Bullet5: Enclosed bolt design
Bullet6: Reinforced PTFE seats
Bullet7: Stainless steel ball and stem
Bullet8: Vented ball
Bullet9: Locking lever handle
Country: TW
Description: Three-Piece Carbon Steel Ball Valve - Fire Safe, Threaded ISO Mount End
Disclaimer: End Connection: Threaded Valve Style: Three-piece body, conventional port Basic Material: Carbon steel Seat Material: Reinforced PTFE 15% glass Trim Material: Stainless steel ball and stem