Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve features an EPDM encapsulated ductile iron disc. The internal stem/disc splined drive design eliminates the need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HN0GR
Width:
Height:
Extra Data: EPDM encapsulated ductile iron disc, Splined drive, Stainless steel stem with metal bushings, Valve pressure rating 300 psi wwp
AltImageName1: /NBC/GD47653;GD4765-5.jpg
AltImageName2: /NBC/GD47653;GD4765-5.jpg
AltImagePath1: /NBC-GD47653;GD4765-5.JPEG
AltImagePath2: /NBC-GD47653;GD4765-5.JPEG
Bullet10: MSS SP-25 (markings)
Bullet5: Extended neck for up to 2” of insulation
Bullet6: Operating mechanism: bare stem, lever lock and manual gear operator
Bullet7: Not recommended for steam service
Bullet8: NSF/ANSI/CAN-61 and 372
Bullet9: Designed to meet MSS SP-67
Country: US
Description: The NIBCO ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve features an EPDM encapsulated ductile iron disc. The internal stem/disc splined drive design eliminates the need for pins or bolts tha
Height: 5.860
Length: 17.380
MadeInUSA: Yes
Material: Ductile Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve is ideal for commercial and light industrial process applications that may include HVAC, hot and cold domestic water, low pressure steam, compressed air, LP gas and natural gas. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8RV3
Width:
Height:
Extra Data: Blowout-proof stem, Chrome plated brass ball, silicon bronze stem, Maximum temperature rating 400°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet5: Standard lever handle, optional NIB-SEAL®
Bullet6: Solder end connections
Bullet7: Dezincification resistant
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet9: Conforms to MSS SP-110
Country: US
Description: Two-Piece Bronze Ball Valve - Full Port, Solder End Connections
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 3.690
Length: 8.740
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The female adapter features a solder cup and female NPT thread. The fittings provide a means of adapting a solder connection to a threaded connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 7076PKX
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.23
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features thread ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFT7W
Width:
Height:
Extra Data: Chrome plated brass ball, silicon bronze stem, Full port, Maximum temperature rating 400°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Conforms to MSS SP-110
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®
Bullet7: Threaded end connections
Bullet8: Dezincification resistant
Bullet9: Use in U.S. drinking water applications is prohibited after January 3, 2014
Country: US
Description: Two-Piece Bronze Ball Valve - Full Port, Threaded
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 3.100
Length: 8.900
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO pecent flanged cast iron gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO pecent gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO pecent pressure rated valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L23V
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353 Degrees F/178 Degrees C, 200 psi/13.8 bar non-shock cold working pressure, Bolted bonnet, Outside screw and yoke
Bullet5: Solid wedge
Bullet6: Iron body bronze mounted (IBBM)
Bullet7: Class 125 flanged flat face end connections
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet9: Conforms to MSS SP-70
Country: United States
Description: Gate Valve - Class 125, Cast Iron, Flanged
Item Description
The 90-degree fitting elbow features a solder cup and a male solder end. The fitting provides a means of changing the pipeline direction 90 degrees. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 7079Z2T
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Material and workmanship per ASME B16.29
Country: US
Description: DWV 90 degrees Fitting Elbow Ftg x C - Wrot
Item Description
The P-Trap features a solder x slip joint connection and union joint. The fitting provides a water seal, preventing unwanted gases to enter the dwelling. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 7076QLC
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.23
Country: US
Description: DWV P-Trap with Union Joint C x SJ - Cast
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO pecent ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve features an EPDM encapsulated ductile iron disc. The internal stem/disc splined drive design eliminates the need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO pecent ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO pecent butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HN0GV
Width:
Height:
Extra Data: EPDM encapsulated ductile iron disc, Grooved style, Max temperature rating 200 Degrees F, Valve pressure rating 300 psi (2'' to 10''); 200 psi (12'' only)
AltImageName1: /NBC/GD47653.jpg
AltImageName2: /NBC/GD47653.jpg
AltImagePath1: /NBC-GD47653.JPEG
AltImagePath2: /NBC-GD47653.JPEG
Bullet10: Certified to NSF/ANSI-61-8 and NSF/ANSI-372
Bullet11: Designed to meet MSS SP-67
Bullet12: MSS SP-25 (markings)
Bullet5: Stainless steel stem with metal bushings
Bullet6: Splined drive
Bullet7: Extended neck
Bullet8: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The EPDM cartridge seat liner with ductile iron, electro nickel plated disc is recommended for most water applications. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® international cast iron butterfly valves for versatile and economical applications in commercial systems. These valves are backed by the NIBCO 5-year125% limited warranty.
Item ID: 70HMYHG
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM cartridge seat liner, Nickel electroplated ductile iron disc, Valve pressure rating 200 psi
Bullet10: MSS SP-25 (markings)
Bullet5: Stainless steel stem with bronze bushings
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® Press System is user friendly, quick and easy to install. Simply applying pressure from a press-fit tool tightens the O-ring onto the tube, ensuring a clean, permanent, watertight seal in seconds, with no flame, solder or flux. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO® Press System features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. NIBCO® Press System valves are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707KZ5E
Width:
Height:
Extra Data: Full port, Maximum service temperature 250°F, Two-piece body, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Press leak-detection feature
Bullet5: Stainless steel trim
Bullet6: Blowout-proof stem
Bullet7: Vented ball
Bullet8: Reinforced PTFE seat rings
Bullet9: Press x press female end connections
Country: US
Description: Ball Valve - Bronze, 250 PSI, Full Port, Thread x Press Ends, Stainless Steel Trim
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC.
Height: 2.960
Length: 10.680
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The Buna-N cartridge seat liner with ductile iron, electro nickel plated disc has good abrasion resistance properties and compatibility with solvents, oil, water and hydraulic fluid for compressed air. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® international cast iron butterfly valves for versatile and economical applications in commercial systems. These valves are backed by the NIBCO 5-year125% limited warranty.
Item ID: 70HMYJ5
Width:
Height:
Extra Data: Buna-N cartridge seat liner, Maximum 180°F service, Nickel electroplated ductile iron disc, Valve pressure rating 200 psi
Bullet10: MSS SP-25 (markings)
Bullet5: Stainless steel stem with bronze bushings
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The solid wedge, integral seats and bi-directional service make the gate valve a good choice for a broad range of services. Non-rising stem gate valves are used when positive shutoff is required and a space saving is necessary. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO® valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8MZG
Width:
Height:
Extra Data: Non-rising stem, Screw-in bonnet, Solid wedge, Valve pressure rating 300 psi/20.6 bar non-shock cold working pressure
Bullet10: Dimensions and workmanship conform to MSS SP-80
Bullet5: White handle for easy lead-free* identification
Bullet6: NIBCO® double-oval lead-free body marking
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. The lead free HydraPure™ Performance Bronze™ ball valve is specifically designed for use in systems that deliver water for human consumption. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System® applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO® Press System® features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. NIBCO® Press System® valves are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707KX7P
Width:
Height:
Extra Data: Copper-to-copper connections, Full port, Maximum service temperature 250°F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Dezincification resistant
Bullet5: Blowout-proof stem
Bullet6: Reinforced PTFE seat rings
Bullet7: Press x press female end connections
Bullet8: Press leak-detection feature
Bullet9: Multiple handle options, including NIB-Seal®
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC. Performance Bronze pecent is a registered trademark of NIBCO INC.
Height: 4.420
Length: 12.790
MadeInUSA: Yes
Material: Lead-Free Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The PVC DWV vent tee features a hub x hub x hub connection and the abrupt 90-degree angle on the outlet is used to change the direction of flow in the venting side of the system. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707DWUR
Width:
Height:
Finish: White
Extra Data: ASTM D2665 and D3311, Maximum service temperature 140°F, Not for use with compressed air or other gases, NSF/ANSI Standard 14
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close and bubble-tight shutoff at 600 PSI. The PTFE seat ring and brass hard chrome plated ball exhibit high chemical resistance properties and is recommended for many high pressure applications. Options include NIB-SEAL® insulated handle that eliminates condensate. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8VUA
Width:
Height:
Extra Data: Chrome plated brass ball, silicon bronze stem, Conventional port, Maximum temperature rating 400°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Conforms to MSS SP-110
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®
Bullet7: Solder end connections
Bullet8: Dezincification resistant
Bullet9: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Full port, Max temperature rating 300 Degrees F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Solder end connections
Bullet5: Stainless steel ball and stem
Bullet6: Vented ball
Bullet7: Blowout-proof stem
Bullet8: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet9: NIBCO® HydraPure® lead-free markings on handle and body
Disclaimer: Performance Bronze is a registered trademark of NIBCO INC. NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 4.320
Length: 7.98
MadeInUSA: Yes
Material: Lead-Free Bronze
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron lug butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design, there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in EPDM seat liner with CF8M stainless steel disc & stem is recommended for most water applications. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJYTZ
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Lug style, Valve pressure rating 200 psi
Bullet10: Designed to meet MSS SP-67
Bullet5: CF8M stainless steel disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The reinforced PTFE seat ring and stainless steel ball/stem exhibits high chemical resistance properties and is recommended for process piping. This valve features threaded ends for easy installation. Please refer to NIBCO technical data sheets, valve selection guides, chemical resistance guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and industrial applications. NIBCO® ball valves are backed by the exclusive NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFW6E
Width:
Height:
Extra Data: Full port, Maximum temperature rating 400°F, Spring Return Handle, Valve pressure rating 1,000 psi 69 bar non-shock cold working pressure
Bullet10: Conforms to NACE MR0175
Bullet5: Blowout-proof stem
Bullet6: Stainless steel ball and stem
Bullet7: Vented ball
Bullet8: Threaded end connections
Bullet9: Conforms to MSS SP-110
Country: TW
Description: Two-Piece Stainless Steel Ball Valve - Full Port, Stainless Steel Trim, Spring Return Handle
Item Description
The NIBCO® ductile iron butterfly valve features a unique molded-in Buna-N seat with stainless steel disc recommended for chemical applications the liner compatibility will permit. The internal stem/disc geometric drive design eliminates the need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJXT3
Width:
Height:
Extra Data: Buna-N molded-in seat liner, Lug style, actuated, Maximum 180°F service, Valve pressure rating 100 psi
Bullet10: Not recommended for steam service
Bullet5: Stainless steel disc
Bullet6: Stainless steel stem with stainless steel bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem for use with pneumatic or electric actuators
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Full port, Max temperature rating 300 Degrees F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Threaded end connections
Bullet5: Stainless steel ball and stem
Bullet6: Vented ball
Bullet7: Blowout-proof stem
Bullet8: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet9: NIBCO® HydraPure® lead-free markings on handle and body
Disclaimer: Performance Bronze is a registered trademark of NIBCO INC. NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 3.750
Length: 7.98
MadeInUSA: Yes
Material: Lead-Free Bronze
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve features a unique molded-in EPDM seat with stainless steel disc, recommended for chemical applications the liner compatibility will permit. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJWTY
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Lug style, Valve pressure rating 100 psi
AltImageName1: /NBC/LD30223.jpg
AltImageName2: /NBC/LD30223.jpg
AltImagePath1: /NBC-LD30223.JPEG
AltImagePath2: /NBC-LD30223.JPEG
Bullet10: Not recommended for steam service
Bullet5: Stainless steel disc
Bullet6: Stainless steel stem with stainless steel bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem for use with pneumatic or electric actuators
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The tee features a solder cup and female NPT threads on the run and a solder cup on the branch. This fitting allows for a connection to be made in continuous pipeline and branch out to a different direction while adapting from a solder connection to a threaded connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 7070L8Z
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.18, Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® lug type butterfly valve is ideal for commercial and some light industrial process applications, including HVAC and vacuum services, in addition to hot and cold potable water. The ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design, there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in EPDM seat liner with aluminum bronze disc is recommended for most water applications. The NIBCO® Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System® applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO® Press System® features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. NIBCO® Press System® valves are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 70HQW7A
Width:
Height:
Extra Data: Ductile iron body, Extended neck, Maximum service temperature 250°F, Valve pressure rating 200 psi/13.8 bar non shock cold working pressure
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The 90-degree elbow features solder cups and a close rough radius. The fitting provides a means of changing the pipeline direction 90 degrees. It is used when velocity is not a problem. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XTF8
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.18, Use in U.S. drinking water applications is prohibited after January 3, 2014
Country: MX
Description: 90 degrees Elbow Close Rough C x C - Cast
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.