Item Description
The NIBCO® flanged ductile iron gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L32G
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 366°F/185°C, 250 psi/17.2 bar non-shock cold working pressure, Bolted bonnet, Solid wedge
Bullet5: Iron body bronze mounted (IBBM)
Bullet6: Class 150 raised face flanged end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The light grey Corzan® CPVC tee features female socket connections and exhibits high corrosion and chemical resistance properties. Chemtrol® CPVC fittings are lightweight, easy to install and maintenance-free. Chemtrol® fittings connect piping lengths together with solvent cementing, threading or flanging to create a highly reliable, leak-free system. Please refer to Chemtrol technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Corzan® CPVC Schedule 80 thermoplastics demonstrate excellent mechanical strength over broad temperature range, outstanding underground performance and superior hydraulics. Chemtrol Corzan® CPVC fittings are lightweight, easy to install, maintenance-free and will not rust, scale, pit or corrode. Chemtrol premium line of plastic fittings is backed by a 1-year limited warranty. Because Chemtrol® is a NIBCO brand the flow-control fittings are unsurpassed in quality, performance and longevity.
Item ID: 7070V57
Width:
Height:
Finish: Light Grey
Extra Data: Do not use or test with compressed air or other gases, Female socket connections, Maximum service temperature 210°F, Universal Part No. 1801
Bullet5: ASTM F439
Bullet6: NSF/ANSI Standard 14
Bullet7: NSF/ANSI/CAN-61
Country: US
Description: Socket Tee/Reducing Socket Tee S x S x S - Corzan pecent CPVC Schedule 80
Disclaimer: Corzan pecent is a registered trademark of The Lubrizol Corporation.
Item Description
The NIBCO® flanged ductile iron gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L32T
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 366°F/185°C, 250 psi/17.2 bar non-shock cold working pressure, Bolted bonnet, Solid wedge
AltImageName1: /NBC/F63931.jpg
AltImageName2: /NBC/F63931.jpg
AltImagePath1: /NBC-F63931.JPEG
AltImagePath2: /NBC-F63931.JPEG
Bullet5: Iron body bronze mounted (IBBM)
Bullet6: Class 150 raised face flanged end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Full port, Max temperature rating 300 Degrees F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Threaded end connections
Bullet5: Stainless steel ball and stem
Bullet6: Vented ball
Bullet7: Blowout-proof stem
Bullet8: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet9: NIBCO® HydraPure® lead-free markings on handle and body
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engine
Height: 4.250
Length: 8.17
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
892 Sanitary (lined) Butterfly Valves for sanitary applications in Chemical and Food Processing Industries. Lug style available in sizes (from 2” to 12”) have 25-5 duplex SS bodies lined with PTFE, FDA EPDM, FDA Nitrile (Black or White) or fluorocarbon seats to meet a broad range of chemical compatibility requirements. Standard 25-5 duplex SS disc & stem is more corrosion resistant and twice as strong as 316 SS. Valve body is two piece allowing for easy seat replacement and disc/stem replacement.
Item ID: 70J117C
Width:
Height:
Extra Data: Lug style, Seats: PTFE, FDA EPDM, FDA Nitrile (Black or White) or fluorocarbon, Standard operating temperature -40°F to 350°F, Valve pressure rating 150 psi
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Adjustable Packing Gland, Ball valve with integral spring check saves labor, space, and leak paths, Controls Flow With Quarter-Turn Lever Handle, Models available to satisfy all state and federal low-lead laws
Bullet5: Available in FIP, COMP, SWT, PRS, PEX, PEX x FIP
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The PTFE seat ring and brass hard chrome plated ball exhibit high chemical resistance properties and is recommended for many high pressure applications. The three-piece valve features threaded ends for easy installation. Options include NIB-SEAL® insulated handle that eliminates condensate. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFY27
Width:
Height:
Extra Data: Chrome plated brass ball, silicon bronze stem, Conventional port, Maximum temperature rating 400°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Conforms to MSS SP-110
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®
Bullet7: Threaded end connections
Bullet8: Dezincification resistant
Bullet9: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The repair coupling features solder cups and no stop. The fitting provides a means to connect/repair two lengths of tube. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706ULWV
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: Material, workmanship and dimensions per MSS SP-109 (5" to 8")
Bullet8: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Item Description
Engineered with a modular approach, NIBCO® electric actuation systems offer the flexibility to actuate new valves or to retrofit existing valves with unprecedented ease. Electric actuation systems feature an ISO standard mounting design, assuring long-term industry acceptance. Choose NIBCO® flow control products for the most specified, versatile and economical option in commercial and industrial applications. NIBCO® actuation products are backed by the NIBCO limited warranty.
Item ID: 70J4CMF
Width:
Height:
Extra Data: Hardened steel drive shaft, Heater and thermostat installed, Permanently lubricated steel gear train, Rated at 30% duty cycle
Bullet10: Temperature range -40°F to +140°F
Bullet5: 4, 10, 15, or 30-second cycle
Bullet6: Single phase capacitor run motor with thermal overload protection
Bullet7: Motor brake standard on 4 and 10-second cycle units
Bullet8: Declutchabale manual override
Bullet9: Two 1/2" NPT conduit entrances
Country: US
Description: Electric Actuators - Compact, NEMA 4, 7
Height: 6.250
Length: 8.250
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Adjustable Packing Gland, Ball valve with integral spring check saves labor, space, and leak paths, Controls Flow With Quarter-Turn Lever Handle, Models available to satisfy all state and federal low-lead laws
Bullet5: Available in FIP, COMP, SWT, PRS, PEX, PEX x FIP
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Engineered with a modular approach, NIBCO® electric actuation systems offer the flexibility to actuate new valves or to retrofit existing valves with unprecedented ease. Electric actuation systems feature an ISO standard mounting design, assuring long-term industry acceptance. Choose NIBCO® flow control products for the most specified, versatile and economical option in commercial and industrial applications. NIBCO® actuation products are backed by the NIBCO limited warranty.
Item ID: 70J4CMA
Width:
Height:
Extra Data: Hardened steel drive shaft, Heater and thermostat installed, Permanently lubricated steel gear train, Rated at 30% duty cycle
Bullet10: Temperature range -40°F to +140°F
Bullet5: 4, 10, 15, or 30-second cycle
Bullet6: Single phase capacitor run motor with thermal overload protection
Bullet7: Motor brake standard on 4 and 10-second cycle units
Bullet8: Declutchabale manual override
Bullet9: Two 1/2" NPT conduit entrances
Country: US
Description: Electric Actuators - Compact, NEMA 4, 7
Height: 6.250
Length: 8.250
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HUXVX
Width:
Height:
Extra Data: 200 psi non-shock cold working pressure to 250°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
AltImageName1: /NBC/PC1800.jpg
AltImageName2: /NBC/PC1800.jpg
AltImagePath1: /NBC-PC1800.JPEG
AltImagePath2: /NBC-PC1800.JPEG
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - Press Ends
Length: 7.650
Made to Order: Yes
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides a unique molded-in EPDM seat liner with aluminum bronze disc, recommended for most water applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMYG2
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Valve pressure rating 100 psi, Wafer style, actuated
AltImageName1: /NBC/WD20003.jpg
AltImageName2: /NBC/WD20003.jpg
AltImagePath1: /NBC-WD20003.JPEG
AltImagePath2: /NBC-WD20003.JPEG
Bullet10: Lead-free*
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Extended neck
Bullet8: Geometric drive
Bullet9: Operating mechanism: Bare stem for use with pneumatic or electric actuators
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® full port bronze ball valve provides bubble-tight shutoff at 600 PSI. The two-piece valve is ideal for commercial and light industrial process applications that may include HVAC, hot and cold domestic water, low pressure steam, compressed air, LP gas and natural gas. The bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFU6Z
Width:
Height:
Extra Data: Chrome plated brass ball, silicon bronze stem, Male x female threaded end connections, Maximum temperature rating 400°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®
Bullet7: Dezincification resistant
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet9: Conforms to MSS SP-110
Country: US
Description: Two-Piece Bronze Ball Valve - Male x Female Threaded End Connections
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 3.100
Length: 8.900
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze gate valve may be used in commercial and industrial applications, HVAC, specifically for medium to high pressure steam, and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® gate valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCTJC
Width:
Height:
Extra Data: 300 psi/20.7 bar saturated steam to 421°F/216°C, 600 psi/41.4 bar non-shock cold working pressure, Alloy solid wedge, Non-rising stem
Bullet5: Union bonnet
Bullet6: Class 300 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The light grey Corzan® CPVC tee features female socket connections and exhibits high corrosion and chemical resistance properties. Chemtrol® CPVC fittings are lightweight, easy to install and maintenance-free. Chemtrol® fittings connect piping lengths together with solvent cementing, threading or flanging to create a highly reliable, leak-free system. Please refer to Chemtrol technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Corzan® CPVC Schedule 80 thermoplastics demonstrate excellent mechanical strength over broad temperature range, outstanding underground performance and superior hydraulics. Chemtrol Corzan® CPVC fittings are lightweight, easy to install, maintenance-free and will not rust, scale, pit or corrode. Chemtrol premium line of plastic fittings is backed by a 1-year limited warranty. Because Chemtrol® is a NIBCO brand the flow-control fittings are unsurpassed in quality, performance and longevity.
Item ID: 7070V58
Width:
Height:
Finish: Light Grey
Extra Data: Do not use or test with compressed air or other gases, Female socket connections, Maximum service temperature 210°F, Universal Part No. 1801
Bullet5: ASTM F439
Bullet6: NSF/ANSI Standard 14
Bullet7: NSF/ANSI/CAN-61
Country: US
Description: Socket Tee/Reducing Socket Tee S x S x S - Corzan pecent CPVC Schedule 80
Disclaimer: Corzan pecent is a registered trademark of The Lubrizol Corporation.
Item Description
The NIBCO® ductile iron lug butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design, there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in fluoroelastomer seat liner with CF8M stainless steel disc & stem for non-water applications. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJZRW
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, FKM molded-in seat liner, Lug style, Valve pressure rating 200 psi
Bullet10: Designed to meet MSS SP-67
Bullet5: CF8M stainless steel disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Full port, Max temperature rating 300 Degrees F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Solder end connections
Bullet5: Stainless steel ball and stem
Bullet6: Vented ball
Bullet7: Blowout-proof stem
Bullet8: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet9: NIBCO® HydraPure® lead-free markings on handle and body
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineer
Height: 2.840
Length: 9.24
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique Buna-N molded-in seat liner with stainless steel disc is recommended for chemical applications the liner compatibility will permit. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMWH8
Width:
Height:
Extra Data: Buna-N molded-in seat liner, Maximum 180°F service, Valve pressure rating 250 psi, Wafer style
AltImageName1: /NBC/WD30223.jpg
AltImageName2: /NBC/WD30223.jpg
AltImagePath1: /NBC-WD30223.JPEG
AltImagePath2: /NBC-WD30223.JPEG
Bullet10: Not recommended for steam service
Bullet5: Stainless steel disc
Bullet6: Stainless steel stem with stainless steel bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Full port, Max temperature rating 300 Degrees F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Threaded end connections
Bullet5: Stainless steel ball and stem
Bullet6: Vented ball
Bullet7: Blowout-proof stem
Bullet8: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet9: NIBCO® HydraPure® lead-free markings on handle and body
Disclaimer: Performance Bronze is a registered trademark of NIBCO INC. NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 2.940
Length: 7.77
MadeInUSA: Yes
Material: Lead-Free Bronze
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® flanged ductile iron gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L41L
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 366°F/185°C, 250 psi/17.2 bar non-shock cold working pressure, Bolted bonnet, Outside screw and yoke
AltImageName1: /NBC/F63731.jpg
AltImageName2: /NBC/F63731.jpg
AltImagePath1: /NBC-F63731.JPEG
AltImagePath2: /NBC-F63731.JPEG
Bullet5: Solid wedge
Bullet6: Iron body bronze mounted (IBBM)
Bullet7: Class 150 raised face flanged end connections
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet9: Conforms to MSS SP-128
Country: US
Description: Gate Valve - Class 150, Ductile Iron, Raised Face Flanges
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The 45-degree wye features solder cups. This fitting allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 7076PM8
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.23
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique molded-in Buna-N seat liner with stainless steel disc is recommended for chemical applications the liner compatibility will permit. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJXTT
Width:
Height:
Extra Data: Lug style, Maximum 180°F service, NBR molded-in seat liner, Valve pressure rating 250 psi
AltImageName1: /NBC/LD30223.jpg
AltImageName2: /NBC/LD30223.jpg
AltImagePath1: /NBC-LD30223.JPEG
AltImagePath2: /NBC-LD30223.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Stainless steel disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Extended neck
Bullet8: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Bullet9: Not recommended for steam service
Country: US
Description: The NIBCO ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique molded-in Buna-N seat liner with stainless steel disc is recommended for chemical applications the liner compatibility will permit. W
Height: 4.590
Length: 19.250
MadeInUSA: Yes
Material: Ductile Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Engineered with a modular approach, NIBCO® pneumatic actuation systems offer the flexibility to actuate new valves or to retrofit existing valves with unprecedented ease. Pneumatic actuation systems feature an ISO standard mounting design, assuring long-term industry acceptance. Choose NIBCO® flow control products for the most specified, versatile and economical option in commercial and industrial applications. NIBCO® actuation products are backed by the NIBCO limited warranty.
Item ID: 70J4CPQ
Width:
Height:
Extra Data: Durable extruded anodized aluminum housing, One-piece solid steel shaft, Twin guide bars on pistons assure optimum rack and pinion engagement, Unique 3-point load bearing design for smooth operation
Bullet5: Epoxy coated end caps
Bullet6: ISO 5211 or NIBCO direct mount dimensions
Bullet7: NAMUR standard accessory mounting dimensions
Bullet8: UNC tapping
Country: US
Description: Pneumatic Actuators - Double Acting or Spring Return
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site