Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The PTFE seat ring and brass hard chrome plated ball exhibits high chemical resistance properties and is recommended for many high pressure applications. The three-piece valve features threaded ends for easy installation. Options include NIB-SEAL® insulated handle that eliminates condensate. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFY57
Width:
Height:
Extra Data: Blowout-proof stem, Full port, Maximum temperature rating 400°F, Valve pressure rating 175 psi 12.1 bar non-shock LP gas per UL842
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The ABS DWV 90-degree elbow features a hub x hub connection and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707A03G
Width:
Height:
Finish: Black
Extra Data: ASTM D2665, CSA B181.1, Do not test or use with compressed air or other gases, Service temperature -40°F to 180°F
Bullet5: ASTM D3965
Bullet6: ASTM D2661 and D3311
Bullet7: UL Listed 94V-0
Bullet8: NSF/ANSI Standard 14
Bullet9: NSF U.P. Certified
Country: US
Description: 90 degrees Elbow H x H - ABS DWV
Finish Family: Black
Height: 7.210
Length: 12.230
Low Lead: Yes
MadeInUSA: Yes
Material: Acrylonitrile Butadiene Styrene
Minimum Order Quantity: 5
Prop65: This product can expose you to Styrene, a chemical known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve is designed specifically to meet the rigorous requirements of automatic sprinkler systems. The EPDM encapsulated ductile iron disc provides bubble-tight shutoff at rated pressure. With the internal splined stem/disc drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and fire protection systems. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HN0FE
Width:
Height:
Extra Data: Available with (suffix 8N) or without (suffix 4N) internal monitor switches, EPDM encapsulated ductile iron disc, Stainless steel stem with metal bushings, Valve pressure rating 300 psi wwp
AltImageName1: /NBC/GD48658N.jpg
AltImageName2: /NBC/GD48658N.jpg
AltImagePath1: /NBC-GD48658N.JPEG
AltImagePath2: /NBC-GD48658N.JPEG
Bullet10: MSS SP-25 (markings)
Bullet5: Available in-ground post (suffix GP) or wall post (suffix WP) versions - UL only
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve is designed specifically to meet the rigorous requirements of automatic sprinkler systems. The unique EPDM molded-in seat liner with ductile iron disc provides bubble-tight shutoff at rated pressure. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and fire protection systems. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMXGR
Width:
Height:
Extra Data: Ductile iron disc, EPDM molded-in seat liner, Valve pressure rating 250 psi wwp, Wafer style
AltImageName1: /NBC/WD35108.jpg
AltImageName2: /NBC/WD35108.jpg
AltImagePath1: /NBC-WD35108.JPEG
AltImagePath2: /NBC-WD35108.JPEG
Bullet10: Available in-ground post (suffix GP) or wall post (suffix WP) versions - UL only
Bullet5: Stainless steel stem with copper bushings
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The flange features a solder cup and flange face. This fitting provides a means for adapting a solder connection to a flange connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 7070M83
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Conforms to MSS SP-106, Dezincification resistant, Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The PTFE seat ring and brass hard chrome plated ball exhibits high chemical resistance properties and is recommended for many high pressure applications. The three-piece valve features threaded ends for easy installation. Options include NIB-SEAL® insulated handle that eliminates condensate. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HG02A
Width:
Height:
Extra Data: Chrome plated brass ball, silicon bronze stem, Full port, Maximum temperature rating 400°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Conforms to MSS SP-110
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®
Bullet7: Threaded end connections
Bullet8: Dezincification resistant
Bullet9: Use in U.S. drinking water applications is prohibited after January 3, 2014
Country: US
Description: Three-Piece Bronze Ball Valve - Full Port, Threaded End Connections
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve is designed specifically to meet the rigorous requirements of automatic sprinkler systems. The unique EPDM molded-in seat liner with ductile iron disc provides bubble-tight shutoff at rated pressure. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and fire protection systems. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJYUK
Width:
Height:
Extra Data: Ductile iron disc, EPDM molded-in seat liner, Lug style, Valve pressure rating 250 psi wwp
AltImageName1: /NBC/LD35108.jpg
AltImageName2: /NBC/LD35108.jpg
AltImagePath1: /NBC-LD35108.JPEG
AltImagePath2: /NBC-LD35108.JPEG
Bullet10: Available in-ground post (suffix GP) or wall post (suffix WP) versions - UL only
Bullet5: Stainless steel stem with copper bushings
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique molded-in EPDM seat liner with ductile iron disc is recommended for most water applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJWTJ
Width:
Height:
Extra Data: Ductile iron disc, EPDM molded-in seat liner, Lug style, Valve pressure rating 250 psi
AltImageName1: /NBC/LD30103.jpg
AltImageName2: /NBC/LD30103.jpg
AltImagePath1: /NBC-LD30103.JPEG
AltImagePath2: /NBC-LD30103.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Stainless steel stem with copper bushings
Bullet6: Geometric drive
Bullet7: Extended neck
Bullet8: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO® FLO-BOSS® Automatic Balancing Valves are constructed with dezincification resistant materials. This unique valve design provides finite control through a wide range of flow cartridges. Please refer to NIBCO technical data sheets and IOM Manuals for engineering and installation information. Whether a system is designed for heating, cooling or water distribution, it must be properly adjusted and balanced for optimum performance. A balanced system ensures a comfortable indoor climate. Choose NIBCO® Coil-Connect® valves, fittings and accessories for the most specified, versatile and economical option in commercial HVAC and mechanical applications. NIBCO® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HQW9A
Width:
Height:
Extra Data: 300 psi non-shock cold working pressure, DZR Brass body and tail pieces, Maximum temperature rating 260°F at 150 psi, Regulating cartridge DZR Brass and Stainless Steel
AltImageName1: /NBC/T1880SO.jpg
AltImageName2: /NBC/T1880SO.jpg
AltImagePath1: /NBC-T1880SO.JPEG
AltImagePath2: /NBC-T1880SO.JPEG
Bullet5: EPDM O-rings
Bullet6: NPT Threaded Ends
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in EPDM seat liner with stainless steel disc is recommended for chemical applications the liner compatibility will permit. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJWU5
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Lug style, Valve pressure rating 250 psi
AltImageName1: /NBC/LD30223.jpg
AltImageName2: /NBC/LD30223.jpg
AltImagePath1: /NBC-LD30223.JPEG
AltImagePath2: /NBC-LD30223.JPEG
Bullet10: Not recommended for steam service
Bullet5: Stainless steel disc
Bullet6: Stainless steel stem with stainless steel bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO engineers have redesigned the top works of the valve to make it easier to install and service. The stem is triple sealed with double O-rings and PTFE packing. The easily accessible, large pack nut can be tightened without removing the handle or using a special wrench. This also allows for the packing to be replaced and serviced. The handle is reversible without disconnecting the valve.585HP ball valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. When performance matters, choose the NIBCO® 585HP ball valves for the most advanced and versatile valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the industry leading NIBCO INC. 10-year 125% limited warranty.
Item ID: 70TX230
Width:
Height:
Extra Data: 150 psi/10 Bar Steam Working Pressure, Full port, Maximum temperature rating 300°F, Valve pressure rating 1,000 psi 69 bar non-shock cold working pressure
Bullet10: Stainless steel ball and stem
Bullet5: Laser Welded
Bullet6: Reversible Handle
Bullet7: Easily Adjustable Pack Nut
Bullet8: Triple Sealed Stem
Bullet9: Silicon Performance Bronze® Body
Country: US
Description: NEEDS Z FAMILY CREATED BEFORE MARKETING FAMILY
Disclaimer: Performance Bronze pecent is a registered trademark of NIBCO INC.; NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 3.560
Length: 9.290
MadeInUSA: Yes
Material: Lead-Free Bronze
Minimum Order Quantity: 2
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO® ductile iron butterfly valves provide ease of operation with quarter-turn (90 degrees) open to close. The unique FKM fluoroelastomer molded-in seat liner with stainless steel disc is recommended for chemical applications the liner compatibility will permit. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJXUT
Width:
Height:
Extra Data: FKM fluoroelastomer molded-in seat liner, Lug style, Maximum 300°F service, Valve pressure rating 250 psi
AltImageName1: /NBC/LD30223.jpg
AltImageName2: /NBC/LD30223.jpg
AltImagePath1: /NBC-LD30223.JPEG
AltImagePath2: /NBC-LD30223.JPEG
Bullet10: Not recommended for steam service
Bullet5: Stainless steel disc
Bullet6: Stainless steel stem with stainless steel bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO engineers have redesigned the top works of the valve to make it easier to install and service. The stem is triple sealed with double O-rings and PTFE packing. The easily accessible, large pack nut can be tightened without removing the handle or using a special wrench. This also allows for the packing to be replaced and serviced. The handle is reversible without disconnecting the valve.585HP ball valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. When performance matters, choose the NIBCO® 585HP ball valves for the most advanced and versatile valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the industry leading NIBCO INC. 10-year 125% limited warranty.
Item ID: 70TX12Y
Width:
Height:
Extra Data: Full port, Laser Welded, Maximum temperature rating 300°F, Valve Pressure Rating 1,000 psi/69 Bar (1/2" -1") & 800 psi/55 Bar (1 1/4" -2") Non-shock Cold Working Pressure
Bullet10: Blowout-proof Stem
Bullet5: Reversible Handle
Bullet6: Easily Adjustable Pack Nut
Bullet7: Triple Sealed Stem
Bullet8: Silicon Performance Bronze® Body
Bullet9: Stainless steel ball and stem
Country: US
Description: NEEDS Z FAMILY CREATED BEFORE MARKETING FAMILY
Disclaimer: Performance Bronze pecent is a registered trademark of NIBCO INC.; NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 3.560
Length: 9.930
MadeInUSA: Yes
Material: Lead-Free Bronze
Minimum Order Quantity: 2
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique molded-in Buna-N seat liner with ductile iron disc provides good abrasion resistance properties and compatibility with solvents, oil, water and hydraulic fluid for compressed air and vacuum applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJWWK
Width:
Height:
Extra Data: Buna-N molded-in seat liner, Lug style, Maximum 180°F service, Valve pressure rating 250 psi
AltImageName1: /NBC/LD31103.jpg
AltImageName2: /NBC/LD31103.jpg
AltImagePath1: /NBC-LD31103.JPEG
AltImagePath2: /NBC-LD31103.JPEG
Bullet10: Not recommended for steam service
Bullet5: Ductile iron disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The PTFE seat ring and brass hard chrome plated ball exhibits high chemical resistance properties and is recommended for many high pressure applications. The three-piece valve features threaded ends for easy installation. Options include NIB-SEAL® insulated handle that eliminates condensate. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFY4F
Width:
Height:
Extra Data: Chrome plated brass ball, silicon bronze stem, Full port, Maximum temperature rating 400°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Conforms to MSS SP-110
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®
Bullet7: Threaded end connections
Bullet8: Dezincification resistant
Bullet9: Use in U.S. drinking water applications is prohibited after January 3, 2014
Country: US
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve features a Buna-N encapsulated ductile iron disc. The internal stem/disc splined drive design eliminates the need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valves option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJRYW
Width:
Height:
Extra Data: Buna-N encapsulated ductile iron disc, Flanged style, Max temperature rating 180°F, Valve pressure rating 200 psi
AltImageName1: /NBC/FC27650;FC27653;FC27655.jpg
AltImageName2: /NBC/FC27650;FC27653;FC27655.jpg
AltImagePath1: /NBC-FC27650;FC27653;FC27655.JPEG
AltImagePath2: /NBC-FC27650;FC27653;FC27655.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Stainless steel stem with metal bushings
Bullet6: Splined drive
Bullet7: Extended neck
Bullet8: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze angle valve is recommended for service in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. The angle valve is used for throttling or regulating flow and the design eliminates a low area in the system where particles can settle and corrode or solidify. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCWGJ
Width:
Height:
Extra Data: 300 psi/20.7 bar saturated steam to 421°F/216°C, 600 psi/41.4 bar non-shock cold working pressure, Replaceable seat, Union bonnet
Bullet5: Renewable stainless steel full-plug disc
Bullet6: Class 300 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Dezincification resistant
Bullet9: Conforms to MSS SP-80
Country: US
Description: Angle Valve - Bronze, Class 300, Stainless Steel Disc
Height: 3.190
Length: 6.500
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The lead-free ball valve provides bubble-tight shutoff at 600 PSI. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO® valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFY4Q
Width:
Height:
Extra Data: Full port, Repairable design, Silicon Performance Bronze® trim, Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
Bullet10: Dezincification resistant
Bullet5: Blowout-proof stem
Bullet6: PTFE seats
Bullet7: White handle for easy lead-free* identification
Bullet8: NIBCO® double-oval lead-free body marking
Bullet9: Threaded end connections
Country: US
Description: The NIBCO ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The lead-free ball valve provides bubble-tight shutoff at 600 PSI. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering
Height: 4.040
Length: 9.820
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The bulkhead fitting features a solder cup and male NPT thread. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 7070M8Y
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.18, Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The lead-free ball valve provides bubble-tight shutoff at 600 PSI. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO® valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8WR1
Width:
Height:
Extra Data: Full port, Repairable design, Silicon Performance Bronze® trim, Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
Bullet10: Dezincification resistant
Bullet5: Blowout-proof stem
Bullet6: PTFE seats
Bullet7: White handle for easy lead-free* identification
Bullet8: NIBCO® double-oval lead-free body marking
Bullet9: Solder end connections
Country: US
Description: The NIBCO ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The lead-free ball valve provides bubble-tight shutoff at 600 PSI. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering
Height: 4.020
Length: 9.600
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The PTFE seat ring and brass hard chrome plated ball exhibits high chemical resistance properties and is recommended for many high pressure applications. The three-piece valve features threaded ends for easy installation. Options include NIB-SEAL® insulated handle that eliminates condensate. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFY3G
Width:
Height:
Extra Data: Chrome plated brass ball, silicon bronze stem, Full port, Maximum temperature rating 400°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Conforms to MSS SP-110
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®
Bullet7: Threaded end connections
Bullet8: Dezincification resistant
Bullet9: Use in U.S. drinking water applications is prohibited after January 3, 2014
Country: US
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The PTFE seat ring and brass hard chrome plated ball exhibits high chemical resistance properties and is recommended for many high pressure applications. T
Height: 3.910
Length: 9.770
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. Options include NIB-SEAL® insulated handle that eliminates condensate. The three-piece valve is ideal for hot/cold water, numerous gas applications, compressed air, vacuum service, condenser and chilled water. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8VRA
Width:
Height:
Extra Data: Conventional port, Maximum temperature rating 400°F, Stainless steel ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle or locking lever, optional NIB-SEAL®
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® swing check valve features a screw-in bonnet for accessibility to repair or replace parts. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8PY4
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Renewable bronze disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 125 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-80
Country: US
Description: Check Valve - Bronze, Class 125, Bronze Seat Disc
Height: 3.050
Length: 6.440
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.