Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve features an EPDM encapsulated ductile iron disc. The internal stem/disc splined drive design eliminates the need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJTWD
Width:
Height:
Extra Data: EPDM encapsulated ductile iron disc, Flanged style, Max temperature rating 200°F, Valve pressure rating 285 psi
AltImageName1: /NBC/FC27650;FC27653;FC27655.jpg
AltImageName2: /NBC/FC27650;FC27653;FC27655.jpg
AltImagePath1: /NBC-FC27650;FC27653;FC27655.JPEG
AltImagePath2: /NBC-FC27650;FC27653;FC27655.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Stainless steel stem with metal bushings
Bullet6: Splined drive
Bullet7: Extended neck
Bullet8: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Bullet9: Not recommended for steam service
Country: US
Description: The NIBCO ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve features an EPDM encapsulated ductile iron disc. The internal stem/disc splined drive design eliminates the need for pins or bolts tha
Height: 9.000
Length: 15.000
MadeInUSA: Yes
Material: Ductile Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron lug butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design, there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in EPDM seat liner with aluminum bronze disc is recommended for most water applications. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJUWM
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Lug style, Valve pressure rating 200 psi
AltImageName1: /NBC/LD20003.jpg
AltImageName2: /NBC/LD20003.jpg
AltImagePath1: /NBC-LD20003.JPEG
AltImagePath2: /NBC-LD20003.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron gate valve features a Class 125 mechanical joint end connection for easy installation and accessibility. These valves are Underwriters Listed and FM Approved for fire protection systems as system control valves. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical, fire protection and industrial applications. NIBCO® pressure rated valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8MX6
Width:
Height:
Extra Data: 175 psi/12.1 bar non-shock water working pressure (WWP), Bolted bonnet, Class 125 threaded end connections, Iron body, bronze mounted trim (IBBM)
Bullet5: Solid wedge
Bullet6: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet7: Listed by UL/ULC (UL262) Canadian ULC/ORD-C262
Bullet8: FM Approved
Country: US
Description: Gate Valve - Cast Iron, Fire Protection, Mechanical Joint End
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The PVC DWV double sanitary tee features all hub connections, a flowing sweep to aid in the evacuation of waste and used fluids, and a 90-degree side inlet to join a PVC branch line into a vertical drain pipe. The tee allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707DWWT
Width:
Height:
Finish: White
Extra Data: ASTM D2665 and D3311, Do not test or use with compressed air or other gases, Maximum service temperature 140°F, NSF/ANSI Standard 14
Bullet5: UL Listed 94V-0
Bullet6: NSF U.P. Certified
Country: US
Description: Double Sanitary Tee with 90 degrees Inlet Hub - PVC DWV
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve features a Buna-N encapsulated ductile iron disc. With the internal stem/disc splined drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJTWL
Width:
Height:
Extra Data: Buna-N encapsulated ductile iron disc, Flanged style, Max temperature rating 180°F, Valve pressure rating 285 psi
AltImageName1: /NBC/FC27650;FC27653;FC27655.jpg
AltImageName2: /NBC/FC27650;FC27653;FC27655.jpg
AltImagePath1: /NBC-FC27650;FC27653;FC27655.JPEG
AltImagePath2: /NBC-FC27650;FC27653;FC27655.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Stainless steel stem with metal bushings
Bullet6: Splined drive
Bullet7: Extended neck
Bullet8: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The EPDM cartridge seat liner with ductile iron, electro nickel plated disc is recommended for most water applications. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® international cast iron butterfly valves for versatile and economical applications in commercial systems. These valves are backed by the NIBCO 5-year125% limited warranty.
Item ID: 70HMYH9
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM cartridge seat liner, Nickel electroplated ductile iron disc, Valve pressure rating 200 psi
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® wafer type butterfly valve is provided with undercut discs for actuation purposes only. The valve is specifically designed for low pressure (100 PSI bubble-tight) on/off or modulating applications to be used in conjunction with pneumatic or electric actuators. The NIBCO® ductile iron butterfly valve features a unique molded-in Buna-N seat liner with ductile iron, electro nickel plated disc, recommended for most water applications. The internal stem/disc geometric drive design eliminates the need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information.
Item ID: 70HMVJX
Width:
Height:
Extra Data: Buna-N molded-in seat liner, Maximum 180°F service, Valve pressure rating 100 psi, Wafer style, actuated
AltImageName1: /NBC/WD31103.jpg
AltImageName2: /NBC/WD31103.jpg
AltImagePath1: /NBC-WD31103.JPEG
AltImagePath2: /NBC-WD31103.JPEG
Bullet10: Not recommended for steam service
Bullet5: Nickel electroplated ductile iron disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem for use with pneumatic or electric actuators
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The tee features solder cups on the run and female NPT threads on the branch. This fitting allows for a connection to be made in continuous pipeline and branch out to a different direction while adapting from a solder connection to a threaded connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique molded-in EPDM seat liner with aluminum bronze disc is recommended for most water applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMWJP
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Valve pressure rating 250 psi, Wafer style
AltImageName1: /NBC/WD20003.jpg
AltImageName2: /NBC/WD20003.jpg
AltImagePath1: /NBC-WD20003.JPEG
AltImagePath2: /NBC-WD20003.JPEG
Bullet10: Not recommended for steam service
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve is ideal for commercial and light industrial process applications that may include HVAC, hot and cold domestic water, low pressure steam, compressed air, LP gas, natural gas and aggressive water applications. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8RV7
Width:
Height:
Extra Data: Full port, Maximum temperature rating 400°F, Stainless steel ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet5: Vented ball
Bullet6: Blowout-proof stem
Bullet7: Standard lever handle, optional NIB-SEAL®
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 2.500
Length: 7.200
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Engineered with a modular approach, NIBCO® electric actuation systems offer the flexibility to actuate new valves or to retrofit existing valves with unprecedented ease. Electric actuation systems feature an ISO standard mounting design, assuring long-term industry acceptance. Choose NIBCO® flow control products for the most specified, versatile and economical option in commercial and industrial applications. NIBCO® actuation products are backed by the NIBCO limited warranty.
Item ID: 70J4CMH
Width:
Height:
Extra Data: Hardened steel drive shaft, Heater and thermostat installed, Permanently lubricated steel gear train, Rated at 30% duty cycle
Bullet10: Temperature range -40°F to +140°F
Bullet5: 4, 10, 15, or 30-second cycle
Bullet6: Single phase capacitor run motor with thermal overload protection
Bullet7: Motor brake standard on 4 and 10-second cycle units
Bullet8: Declutchabale manual override
Bullet9: Two 1/2" NPT conduit entrances
Country: US
Description: Electric Actuators - Compact, NEMA 4, 7
Height: 6.250
Length: 8.250
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close, and bubble-tight shutoff at 600 PSI. The two-piece valve features threaded ends for easy installation. The two-piece valve is ideal for commercial and light industrial process applications that may include HVAC, hot and cold domestic water, low pressure steam, compressed air, LP gas and natural gas. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFU6N
Width:
Height:
Extra Data: Full port, Maximum temperature rating 400°F, Single union end piece, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
AltImageName1: /NBC/T58570SU.jpg
AltImageName2: /NBC/T58570SU.jpg
AltImagePath1: /NBC-T58570SU.JPEG
AltImagePath2: /NBC-T58570SU.JPEG
Bullet10: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet7: Standard lever handle, optional NIB-SEAL®
Bullet8: Threaded end connections
Bullet9: Dezincification resistant
Country: US
Description: Two-Piece Bronze Ball Valve - Single Union End, Threaded
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 2.500
Length: 7.200
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Engineered with a modular approach, NIBCO® electric actuation systems offer the flexibility to actuate new valves or to retrofit existing valves with unprecedented ease. Electric actuation systems feature an ISO standard mounting design, assuring long-term industry acceptance. Choose NIBCO® flow control products for the most specified, versatile and economical option in commercial and industrial applications. NIBCO® actuation products are backed by the NIBCO limited warranty.
Item ID: 70J4CM2
Width:
Height:
Extra Data: Hardened steel drive shaft, Heater and thermostat installed, Permanently lubricated steel gear train, Rated at 30% duty cycle
Bullet10: Temperature range -40°F to +140°F
Bullet5: 4, 10, 15, or 30-second cycle
Bullet6: Single phase capacitor run motor with thermal overload protection
Bullet7: Motor brake standard on 4 and 10-second cycle units
Bullet8: Declutchabale manual override
Bullet9: Two 1/2" NPT conduit entrances
Country: US
Description: Electric Actuators - Compact, NEMA 4, 7
Height: 6.250
Length: 8.250
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The 90-degree elbow features a solder cup and male NPT thread. The fitting provides a means of changing the pipeline direction 90 degrees, as well as adapting from a solder connection to a threaded connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XUDQ
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.18, Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The resilient wedge, ductile iron gate valve features Class 125 flanged, flat face end connections for easy installation and accessibility. Outside screw and yoke (OS&Y) gate valves are recommended when positive shutoff and a quick visual indicator of open/closed position is required. This valve features a pre-grooved stem for tamper switch mounting and is NOT drilled, tapped, and plugged at location ''''A'''' for bypass. It is listed by Underwriters Laboratories of the US and Canada (UL/ULC) and FM Approved. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical, fire protection and industrial applications. NIBCO® pressure rated valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HUYWE
Width:
Height:
Extra Data: 300 psi/20.7 bar non-shock cold working pressure, Bolted bonnet, Outside screw and yoke, Resilient wedge
Bullet10: FM Approved
Bullet5: Epoxy coated body inside and out per AWWA C-550 (coating NSF and FDA certified)
Bullet6: Flanged end connections
Bullet7: Conforms to MSS SP-70
Bullet8: Meets or exceeds performance requirements of AWWA C509 and C515 for 3" and larger valves
Bullet9: Listed by UL/ULC (UL262)
Country: US
Description: Gate Valve - Ductile Iron, Fire Protection, Resilient Wedge, NO tapped/plugged hole
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO engineers have redesigned the top works of the valve to make it easier to install and service. The stem is triple sealed with double O-rings and PTFE packing. The easily accessible, large pack nut can be tightened without removing the handle or using a special wrench. This also allows for the packing to be replaced and serviced. The handle is reversible without disconnecting the valve.585HP ball valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. When performance matters, choose the NIBCO® 585HP ball valves for the most advanced and versatile valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the industry leading NIBCO INC. 10-year 125% limited warranty.
Item ID: 70TX22Y
Width:
Height:
Extra Data: 150 psi/10 Bar Steam Working Pressure, Full port, Maximum temperature rating 300°F, Valve pressure rating 1,000 psi 69 bar non-shock cold working pressure
Bullet10: Stainless steel ball and stem
Bullet5: Laser Welded
Bullet6: Reversible Handle
Bullet7: Easily Adjustable Pack Nut
Bullet8: Triple Sealed Stem
Bullet9: Silicon Performance Bronze® Body
Country: US
Description: NEEDS Z FAMILY CREATED BEFORE MARKETING FAMILY
Disclaimer: Performance Bronze pecent is a registered trademark of NIBCO INC.; NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 2.380
Length: 6.750
MadeInUSA: Yes
Material: Lead-Free Bronze
Minimum Order Quantity: 5
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Engineered with a modular approach, NIBCO® electric actuation systems offer the flexibility to actuate new valves or to retrofit existing valves with unprecedented ease. Electric actuation systems feature an ISO standard mounting design, assuring long-term industry acceptance. Choose NIBCO® flow control products for the most specified, versatile and economical option in commercial and industrial applications. NIBCO® actuation products are backed by the NIBCO limited warranty.
Item ID: 70J4CMM
Width:
Height:
Extra Data: Hardened steel drive shaft, Heater and thermostat installed, Permanently lubricated steel gear train, Rated at 30% duty cycle
Bullet10: Temperature range -40°F to +140°F
Bullet5: 4, 10, 15, or 30-second cycle
Bullet6: Single phase capacitor run motor with thermal overload protection
Bullet7: Motor brake standard on 4 and 10-second cycle units
Bullet8: Declutchabale manual override
Bullet9: Two 1/2" NPT conduit entrances
Country: US
Description: Electric Actuators - Compact, NEMA 4, 7
Height: 6.250
Length: 8.250
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO engineers have redesigned the top works of the valve to make it easier to install and service. The stem is triple sealed with double O-rings and PTFE packing. The easily accessible, large pack nut can be tightened without removing the handle or using a special wrench. This also allows for the packing to be replaced and serviced. The handle is reversible without disconnecting the valve.585HP ball valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. When performance matters, choose the NIBCO® 585HP ball valves for the most advanced and versatile valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the industry leading NIBCO INC. 10-year 125% limited warranty.
Item ID: 70TX12W
Width:
Height:
Extra Data: Full port, Laser Welded, Maximum temperature rating 300°F, Valve Pressure Rating 1,000 psi/69 Bar (1/2" -1") & 800 psi/55 Bar (1 1/4" -2") Non-shock Cold Working Pressure
Bullet10: Blowout-proof Stem
Bullet5: Reversible Handle
Bullet6: Easily Adjustable Pack Nut
Bullet7: Triple Sealed Stem
Bullet8: Silicon Performance Bronze® Body
Bullet9: Stainless steel ball and stem
Country: US
Description: NEEDS Z FAMILY CREATED BEFORE MARKETING FAMILY
Disclaimer: Performance Bronze pecent is a registered trademark of NIBCO INC.; NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 2.380
Length: 7.040
MadeInUSA: Yes
Material: Lead-Free Bronze
Minimum Order Quantity: 5
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO pecent resilient wedge ductile iron gate valve features AWWA C900 PVC push-on end connections by flanged cast iron flat face flange for easy installation and accessibility. Non-rising stem gate valves are recommended when positive shutoff is required and where space is a premium. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO pecent gate valves for one of the most versatile and economical valve option in irrigation, commercial, mechanical and industrial applications. NIBCO pecent pressure rated valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L34D
Width:
Height:
Extra Data: 250 psi/17.2 bar non-shock cold working pressure, Bolted bonnet, Cast iron, resilient wedge, flanged, non-rising stem, Maximum operating temperature of 160ºF/71ºC
AltImageName1: /NBC/FPCR619RW-EPS.jpg
AltImageName2: /NBC/FPCR619RW-EPS.jpg
AltImagePath1: /NBC-FPCR619RW-EPS.JPEG
AltImagePath2: /NBC-FPCR619RW-EPS.JPEG
Bullet5: Resilient wedge
Bullet6: Fusion bonded epoxy coated body (NSF and FDA certified)
Bullet7: PVC push-on end connection x flanged
Bullet8: Meets or exceeds performance requirements of AWWA C509 and C515 for 3'' and larger valves
Prop65: WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close and bubble-tight shutoff at 600 PSI. The PTFE seat ring and brass hard chrome plated ball exhibit high chemical resistance properties and is recommended for many high pressure applications. Options include NIB-SEAL® insulated handle that eliminates condensate. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8VTN
Width:
Height:
Extra Data: Chrome plated brass ball, silicon bronze stem, Conventional port, Maximum temperature rating 400°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Conforms to MSS SP-110
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®
Bullet7: Solder end connections
Bullet8: Dezincification resistant
Bullet9: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze check valve features solder end connections for ease of installation. Swing check valves may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8QVN
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 366°F/185°C, 300 psi/20.7 bar non-shock cold working pressure, Renewable bronze disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 150 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The ABS DWV long radius combination tee-wye features a hub x hub x hub connection. The tee-wye allows for a connection to be made in continuous pipe line and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707A12W
Width:
Height:
Finish: Black
Extra Data: ASTM D2665, CSA B181.1, Do not test or use with compressed air or other gases, Service temperature -40°F to 180°F
Bullet5: ASTM D3965
Bullet6: ASTM D2661 and D3311
Bullet7: UL Listed 94V-0
Bullet8: NSF/ANSI Standard 14
Bullet9: NSF U.P. Certified
Country: US
Description: Long Radius Combination Tee-Wye H x H x H - ABS DWV
Finish Family: Black
Height: 5.020
Length: 14.300
Low Lead: Yes
MadeInUSA: Yes
Material: Acrylonitrile Butadiene Styrene
Minimum Order Quantity: 5
Prop65: This product can expose you to Styrene, a chemical known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.
Item Description
The NIBCO® bronze globe valve features a union bonnet with integral seat and renewable standard disc. It is equipped with female threaded ends for ease of installation. This valve is ideal for higher pressure steam. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® globe valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® globe valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCVGM
Width:
Height:
Extra Data: 300 psi/20.7 bar saturated steam to 421°F/216°C, 600 psi/41.4 bar non-shock cold working pressure, Integral seat, Union bonnet
Bullet5: Renewable standard disc
Bullet6: Class 300 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Dezincification resistant
Bullet9: Conforms to MSS SP-80
Country: US
Description: Globe Valve - Bronze, Class 300, PTFE Disc
Height: 6.000
Length: 11.280
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze globe valve is recommended for bi-directional service in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® globe valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® globe valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCTK1
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 366°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Integral seat, Screw-in bonnet
Bullet5: Renewable bronze seat disc
Bullet6: Class 125 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.