Item Description
The NIBCO® flanged cast iron gate valve may be used in commercial and industrial applications which convey oil or gas fluids that are corrosive to bronze trim but allowable for iron or steel. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L25A
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Bolted bonnet, Solid wedge
AltImageName1: /NBC/F617O.jpg
AltImageName2: /NBC/F617O.jpg
AltImagePath1: /NBC-F617O.JPEG
AltImagePath2: /NBC-F617O.JPEG
Bullet5: Outside screw and yoke
Bullet6: Iron body, all iron trim
Bullet7: Class 125 flanged flat face end connections
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet9: Conforms to MSS SP-70
Country: US
Description: Gate Valve - Class 125, Cast Iron, All Iron Trim, Flanged
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The EPDM cartridge seat liner with aluminum bronze disc is recommended for most water applications. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® international cast iron butterfly valves for versatile and economical applications in commercial systems. These valves are backed by the NIBCO 5-year125% limited warranty.
Item ID: 70HMZEU
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM cartridge seat liner, Lug style, Valve pressure rating 200 psi
AltImageName1: /NBC/N200235LH;N200236LH.jpg
AltImageName2: /NBC/N200235LH;N200236LH.jpg
AltImagePath1: /NBC-N200235LH;N200236LH.JPEG
AltImagePath2: /NBC-N200235LH;N200236LH.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with bronze bushings
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® flanged cast iron gate valve may be used in commercial and industrial applications which convey oil or gas fluids that are corrosive to bronze trim but allowable for iron or steel. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L25C
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Bolted bonnet, Solid wedge
AltImageName1: /NBC/F617O.jpg
AltImageName2: /NBC/F617O.jpg
AltImagePath1: /NBC-F617O.JPEG
AltImagePath2: /NBC-F617O.JPEG
Bullet5: Outside screw and yoke
Bullet6: Iron body, all iron trim
Bullet7: Class 125 flanged flat face end connections
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet9: Conforms to MSS SP-70
Country: US
Description: Gate Valve - Class 125, Cast Iron, All Iron Trim, Flanged
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® Ring Check® valve has solder end connections for ease of installation. This check valve may be installed in horizontal positions or vertical with flow moving up. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO® valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8QX6
Width:
Height:
Extra Data: In-line lift-type, PTFE resilient seat disc, Spring actuated, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet5: NIBCO® double-oval lead-free body marking
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Engineered with a modular approach, NIBCO® electric actuation systems offer the flexibility to actuate new valves or to retrofit existing valves with unprecedented ease. Electric actuation systems feature an ISO standard mounting design, assuring long-term industry acceptance. Choose NIBCO® flow control products for the most specified, versatile and economical option in commercial and industrial applications. NIBCO® actuation products are backed by the NIBCO limited warranty.
Item ID: 70U654P
Width:
Height:
Extra Data: Hardened steel drive shaft, Heater and thermostat installed, Permanently lubricated steel gear train, Rated at 30% duty cycle
Bullet10: Temperature range -40°F to +140°F
Bullet5: 4, 10, 15, or 30-second cycle
Bullet6: Single phase capacitor run motor with thermal overload protection
Bullet7: Motor brake standard on 4 and 10-second cycle units
Bullet8: Declutchabale manual override
Bullet9: Two 1/2" NPT conduit entrances
Country: US
Description: Electric Actuators - Compact, NEMA 4, 7
Height: 6.250
Length: 8.250
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The original Chemtrol® True Union design allows the valve and operational components to be conveniently lifted from the piping system for repair or replacement. The valve can be easily joined with the flanged end connections. Please refer to Chemtrol technical data sheets, valve selection guides and catalogs for engineering and installation information. Corzan® CPVC Schedule 80 thermoplastics demonstrate excellent mechanical strength over broad temperature range, outstanding underground performance and superior hydraulics. Chemtrol Corzan® CPVC valves are lightweight, easy to install, maintenance-free and will not rust, scale, pit or corrode. Choose Chemtrol® valves for the most reliable, versatile and economical valve option in commercial and industrial applications. Chemtrol® ball check valves are backed by a 1-year limited warranty. Because Chemtrol® is a NIBCO brand the flow-control valves are unsurpassed in quality, performance and longevity.
Item ID: 707GZGQ
Width:
Height:
Finish: Light Grey
Extra Data: FKM O-ring, Maximum service temperature 210°F, True Union design, Valve pressure rating 150 psi at 73°F water non-shock
AltImageName1: /NBC/F51BC-U.jpg
AltImageName2: /NBC/F51BC-U.jpg
AltImagePath1: /NBC-F51BC-U.JPEG
AltImagePath2: /NBC-F51BC-U.JPEG
Bullet5: Flanged end connections compatible with ANSI B16.5 Class 150
Bullet6: Do not use or test with compressed air or other gases
Item Description
The NIBCO® ductile iron lug butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design, there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in EPDM seat liner with aluminum bronze disc is recommended for most water applications. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJUX5
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Lug style, Valve pressure rating 200 psi
AltImageName1: /NBC/LD20003.jpg
AltImageName2: /NBC/LD20003.jpg
AltImagePath1: /NBC-LD20003.JPEG
AltImagePath2: /NBC-LD20003.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Bullet8: Lead-free*
Bullet9: Not recommended for steam service
Country: US
Description: The NIBCO ductile iron lug butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design, there is no need for pins or bolts that may create leak paths or turbulence in the water
Height: 9.840
Length: 22.170
MadeInUSA: Yes
Material: Ductile Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The solid wedge, integral seats and bi-directional service make the gate valve a good choice for a broad range of services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO® valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HCQK6
Width:
Height:
Extra Data: Non-rising stem, Screw-in bonnet, Solid wedge, Valve pressure rating 300 psi/20.6 bar non-shock cold working pressure
Bullet10: Dimensions and workmanship conform to MSS SP-80
Bullet5: Class 125 threaded end connections
Bullet6: Dezincification resistant
Bullet7: White handle for easy lead-free* identification
Bullet8: NIBCO® double-oval lead-free body marking
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Engineered with a modular approach, NIBCO® electric actuation systems offer the flexibility to actuate new valves or to retrofit existing valves with unprecedented ease. Electric actuation systems feature an ISO standard mounting design, assuring long-term industry acceptance. Choose NIBCO® flow control products for the most specified, versatile and economical option in commercial and industrial applications. NIBCO® actuation products are backed by the NIBCO limited warranty.
Item ID: 70J4CM7
Width:
Height:
Extra Data: Hardened steel drive shaft, Heater and thermostat installed, Permanently lubricated steel gear train, Rated at 30% duty cycle
Bullet10: Temperature range -40°F to +140°F
Bullet5: 4, 10, 15, or 30-second cycle
Bullet6: Single phase capacitor run motor with thermal overload protection
Bullet7: Motor brake standard on 4 and 10-second cycle units
Bullet8: Declutchabale manual override
Bullet9: Two 1/2" NPT conduit entrances
Country: US
Description: Electric Actuators - Compact, NEMA 4, 7
Height: 6.250
Length: 8.250
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The 90-degree union elbow features solder cups and a union connection. The fitting provides a means of changing the pipeline direction 90 degrees. The union connection allows for the line to be repaired without damage. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Engineered with a modular approach, NIBCO® electric actuation systems offer the flexibility to actuate new valves or to retrofit existing valves with unprecedented ease. Electric actuation systems feature an ISO standard mounting design, assuring long-term industry acceptance. Choose NIBCO® flow control products for the most specified, versatile and economical option in commercial and industrial applications. NIBCO® actuation products are backed by the NIBCO limited warranty.
Item ID: 70J4CMR
Width:
Height:
Extra Data: Hardened steel drive shaft, Heater and thermostat installed, Permanently lubricated steel gear train, Rated at 30% duty cycle
Bullet10: Temperature range -40°F to +140°F
Bullet5: 4, 10, 15, or 30-second cycle
Bullet6: Single phase capacitor run motor with thermal overload protection
Bullet7: Motor brake standard on 4 and 10-second cycle units
Bullet8: Declutchabale manual override
Bullet9: Two 1/2" NPT conduit entrances
Country: US
Description: Electric Actuators - Compact, NEMA 4, 7
Height: 6.250
Length: 8.250
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The strainer is a ''''Y'''' type with a branch angled off the flow path. It features a bolted bonnet with blow-off plug for screen maintenance. The strainers are equipped with flanged end connections for easy installation. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® strainers are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8MXE
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 20-mesh wire or perforated stainless steel screen, 200 psi/13.8 bar non-shock cold working pressure, Tapped cap with plug
AltImageName1: /NBC/F721A.jpg
AltImageName2: /NBC/F721A.jpg
AltImagePath1: /NBC-F721A.JPEG
AltImagePath2: /NBC-F721A.JPEG
Bullet5: Class 125 flanged end connections
Bullet6: Dezincification resistant
Bullet7: Conforms to ANSI B16.1
Country: CN
Description: The strainer is a ''Y'' type with a branch angled off the flow path. It features a bolted bonnet with blow-off plug for screen maintenance. The strainers are equipped with flanged end connections for easy installation. Please refer to NIBCO
Height: 7.500
Length: 10.750
Material: Cast Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique molded-in Buna-N seat liner with aluminum bronze disc provides good abrasion resistance properties and compatibility with solvents, oil, water and hydraulic fluid for compressed air and vacuum applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJVVR
Width:
Height:
Extra Data: Buna-N molded-in seat liner, Lug style, Max temperature rating 180°F, Valve pressure rating 200 psi
AltImageName1: /NBC/LD20003.jpg
AltImageName2: /NBC/LD20003.jpg
AltImagePath1: /NBC-LD20003.JPEG
AltImagePath2: /NBC-LD20003.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The solid wedge, integral seats and bi-directional service make the gate valve a good choice for a broad range of services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO® valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HCRHA
Width:
Height:
Extra Data: Non-rising stem, Screw-in bonnet, Solid wedge, Valve pressure rating 300 psi/20.6 bar non-shock cold working pressure
Bullet10: Dimensions and workmanship conform to MSS SP-80
Bullet5: Class 125 threaded end connections
Bullet6: Dezincification resistant
Bullet7: White handle for easy lead-free* identification
Bullet8: NIBCO® double-oval lead-free body marking
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze angle valve is recommended for service in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. The angle valve is used for throttling or regulating flow and the design eliminates a low area in the system where particles can settle and corrode or solidify. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCWGM
Width:
Height:
Extra Data: 300 psi/20.7 bar saturated steam to 421°F/216°C, 600 psi/41.4 bar non-shock cold working pressure, Replaceable seat, Union bonnet
Bullet5: Renewable stainless steel full-plug disc
Bullet6: Class 300 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Dezincification resistant
Bullet9: Conforms to MSS SP-80
Country: US
Description: Angle Valve - Bronze, Class 300, Stainless Steel Disc
Height: 4.500
Length: 10.190
Made to Order: Yes
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique EPDM molded-in seat liner with Nylon Coated Ductile Iron disc is recommended for the higher pressure requirements of Commercial HVAC systems today. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70TZZVE
Width:
Height:
Extra Data: Ductile Iron - Nylon-coated disc, EPDM molded-in seat liner, Lug style, Valve pressure rating 232 psi
Bullet10: Designed to meet MSS SP-67
Bullet5: Stainless steel stem
Bullet6: Bronze Bushings
Bullet7: Extended neck
Bullet8: Gear Operated
Bullet9: Not recommended for steam service
Country: CN
Description: _This is a collection for items that we don''t want to show online_
Item Description
The NIBCO® ductile iron lug butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design, there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in EPDM seat liner with aluminum bronze disc is recommended for most water applications. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJUVX
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Lug style, Valve pressure rating 200 psi
AltImageName1: /NBC/LD20003.jpg
AltImageName2: /NBC/LD20003.jpg
AltImagePath1: /NBC-LD20003.JPEG
AltImagePath2: /NBC-LD20003.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. The lead free HydraPure® Performance Bronze® ball valve is specifically designed for use in systems that deliver water for human consumption. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. NIBCO Press System® valves are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707KY6Z
Width:
Height:
Extra Data: Copper-to-copper connections, Full port, Maximum service temperature 250°F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Multiple handle options, including NIB-Seal®
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC. Performance Bronze pecent is a registered trademark of NIBCO INC.
Height: 4.420
Length: 12.790
MadeInUSA: Yes
Material: Lead-Free Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The ABS DWV 45-degree street wye features a spigot x hub x hub connection and allows for a connection to be made in continuous pipe line and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707A11A
Width:
Height:
Finish: Black
Extra Data: ASTM D2665, CSA B181.1, Do not test or use with compressed air or other gases, Service temperature -40°F to 180°F
Bullet5: ASTM D3965
Bullet6: ASTM D2661 and D3311
Bullet7: UL Listed 94V-0
Bullet8: NSF/ANSI Standard 14
Bullet9: NSF U.P. Certified
Country: US
Description: 45 degrees Street Wye Spg x H x H - ABS DWV
Finish Family: Black
Height: 5.020
Length: 11.750
Low Lead: Yes
MadeInUSA: Yes
Material: Acrylonitrile Butadiene Styrene
Minimum Order Quantity: 5
Prop65: This product can expose you to Styrene, a chemical known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.
Item Description
The NIBCO® cast iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique molded-in EPDM seat liner with aluminum bronze disc is recommended for most water applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® cast iron butterfly valves for versatile and economical valve applications in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HN3EP
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Lug style, Valve pressure rating 200 psi
AltImageName1: /NBC/LC2000.jpg
AltImageName2: /NBC/LC2000.jpg
AltImagePath1: /NBC-LC2000.JPEG
AltImagePath2: /NBC-LC2000.JPEG
Bullet10: Lead-free*
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique molded-in Buna-N seat liner with aluminum bronze disc provides good abrasion resistance properties and compatibility with solvents, oil, water and hydraulic fluid for compressed air and vacuum applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HK1RN
Width:
Height:
Extra Data: Buna-N molded-in seat liner, Maximum 180°F service, Valve pressure rating 200 psi, Wafer style
AltImageName1: /NBC/WD20003.jpg
AltImageName2: /NBC/WD20003.jpg
AltImagePath1: /NBC-WD20003.JPEG
AltImagePath2: /NBC-WD20003.JPEG
Bullet10: Not recommended for steam service
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve''''s unique molded-in Buna-N seat liner with CF8M stainless steel disc is recommended for most applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMWL1
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, Buna-N molded-in seat liner, Valve pressure rating 200 psi, Wafer style
Bullet10: Designed to meet MSS SP-67
Bullet5: CF8M stainless steel disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze globe valve features a union bonnet with integral seat and renewable standard disc. It is equipped with female threaded ends for ease of installation. This valve is ideal for higher pressure steam. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® globe valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® globe valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCVGH
Width:
Height:
Extra Data: 300 psi/20.7 bar saturated steam to 421°F/216°C, 600 psi/41.4 bar non-shock cold working pressure, Integral seat, Union bonnet
Bullet5: Renewable standard disc
Bullet6: Class 300 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Dezincification resistant
Bullet9: Conforms to MSS SP-80
Country: US
Description: Globe Valve - Bronze, Class 300, PTFE Disc
Height: 3.380
Length: 6.670
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site