Item Description
The NIBCO® bronze globe valve is recommended for bi-directional service in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® globe valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® globe valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8NYH
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 366°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Integral seat, Screw-in bonnet
Bullet5: Renewable PTFE seat disc
Bullet6: Class 125 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron lug butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design, there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in EPDM seat liner with aluminum bronze disc is recommended for most water applications. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJUXE
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Lug style, Valve pressure rating 200 psi
AltImageName1: /NBC/LD20003.jpg
AltImageName2: /NBC/LD20003.jpg
AltImagePath1: /NBC-LD20003.JPEG
AltImagePath2: /NBC-LD20003.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR24P
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Height: 1.000
Length: 8.000
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron lug butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design, there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in EPDM seat liner with aluminum bronze disc is recommended for most water applications. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJUXX
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Lug style, Valve pressure rating 200 psi
AltImageName1: /NBC/LD20003.jpg
AltImageName2: /NBC/LD20003.jpg
AltImagePath1: /NBC-LD20003.JPEG
AltImagePath2: /NBC-LD20003.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve''''s unique molded-in EPDM seat liner with aluminum bronze disc is recommended for most water applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HK1PQ
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Valve pressure rating 200 psi, Wafer style
AltImageName1: /NBC/WD20003.jpg
AltImageName2: /NBC/WD20003.jpg
AltImagePath1: /NBC-WD20003.JPEG
AltImagePath2: /NBC-WD20003.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® iron globe valve has flanged end connections for ease of installation. This valve features renewable seat and disc and the bolted bonnet makes the valve convenient to maintain. Because of its seat and disc arrangement this valve is ideal for throttling or regulating flow. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® globe valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® globe valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L50L
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, All iron trim, Bolted bonnet
Bullet5: Renewable seat and disc
Bullet6: Class 125 flanged end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-85
Country: US
Description: Globe Valve - Iron, All Iron Trim
Height: 8.000
Length: 15.310
Made to Order: Yes
MadeInUSA: Yes
Material: Cast Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® gate valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCPMN
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Rising stem, Solid wedge
Bullet5: Screw-in bonnet
Bullet6: Class 125 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® flanged cast iron gate valve may be used in commercial and industrial applications which convey oil or gas fluids that are corrosive to bronze trim but allowable for iron or steel. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L25D
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Bolted bonnet, Solid wedge
AltImageName1: /NBC/F617O.jpg
AltImageName2: /NBC/F617O.jpg
AltImagePath1: /NBC-F617O.JPEG
AltImagePath2: /NBC-F617O.JPEG
Bullet5: Outside screw and yoke
Bullet6: Iron body, all iron trim
Bullet7: Class 125 flanged flat face end connections
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet9: Conforms to MSS SP-70
Country: US
Description: Gate Valve - Class 125, Cast Iron, All Iron Trim, Flanged
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR24G
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Height: 2.870
Length: 11.050
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in EPDM seat liner with stainless steel disc is recommended for chemical applications the liner compatibility will permit. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMVHW
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Valve pressure rating 250 psi, Wafer style
AltImageName1: /NBC/WD30223.jpg
AltImageName2: /NBC/WD30223.jpg
AltImagePath1: /NBC-WD30223.JPEG
AltImagePath2: /NBC-WD30223.JPEG
Bullet10: Not recommended for steam service
Bullet5: Stainless steel disc
Bullet6: Stainless steel stem with stainless steel bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR24K
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Height: 2.890
Length: 12.150
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The bulkhead fitting features solder cups. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 7070M8T
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.18, Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR24N
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Height: 1.000
Length: 7.630
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique Buna-N molded-in seat liner with stainless steel disc is recommended for chemical applications the liner compatibility will permit. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMWHA
Width:
Height:
Extra Data: Buna-N molded-in seat liner, Maximum 180°F service, Valve pressure rating 250 psi, Wafer style
AltImageName1: /NBC/WD30223.jpg
AltImageName2: /NBC/WD30223.jpg
AltImagePath1: /NBC-WD30223.JPEG
AltImagePath2: /NBC-WD30223.JPEG
Bullet10: Not recommended for steam service
Bullet5: Stainless steel disc
Bullet6: Stainless steel stem with stainless steel bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique molded-in Buna-N seat liner with aluminum bronze disc provides good abrasion resistance properties and compatibility with solvents, oil, water and hydraulic fluid for compressed air and vacuum applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HK1RC
Width:
Height:
Extra Data: Buna-N molded-in seat liner, Maximum 180°F service, Valve pressure rating 200 psi, Wafer style
AltImageName1: /NBC/WD20003.jpg
AltImageName2: /NBC/WD20003.jpg
AltImagePath1: /NBC-WD20003.JPEG
AltImagePath2: /NBC-WD20003.JPEG
Bullet10: Not recommended for steam service
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron check valve features flanged end connections for easy installation. It is equipped with a bolted bonnet for maintenance accessibility. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L62M
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Bolted bonnet, Bronze mounted trim
Bullet5: Renewable seat and disc
Bullet6: Class 125 flanged end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR24F
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Height: 2.870
Length: 10.210
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The lug type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve also provides bi-directional dead-end service and includes an arrow on the body to indicate the recommended flow direction. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the powder coated epoxy finish, direct mount actuation, integrally cast disc-stop and dual offset design, one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose Sure Seal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70J173W
Width:
Height:
Extra Data: Lug style, Seats: Glass reinforced PTFE (standard); PTFE; UHMWPE, Standard operating temperature -20°F to 482°F, Valve pressure rating 285 psi
Bullet10: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The 90-degree elbow features solder cups. The fitting provides a means of changing the pipeline direction 90 degrees. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 7076PLR
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.23
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO engineers have redesigned the top works of the valve to make it easier to install and service. The stem is triple sealed with double O-rings and PTFE packing. The easily accessible, large pack nut can be tightened without removing the handle or using a special wrench. This also allows for the packing to be replaced and serviced. The handle is reversible without disconnecting the valve.585HP ball valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. When performance matters, choose the NIBCO® 585HP ball valves for the most advanced and versatile valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the industry leading NIBCO INC. 10-year 125% limited warranty.
Item ID: 70UD7FZ
Width:
Height:
Extra Data: 150 psi/10 Bar Steam Working Pressure, Full port, Maximum temperature rating 300°F, Valve pressure rating 1,000 psi 69 bar non-shock cold working pressure
Bullet10: Stainless steel ball and stem
Bullet5: Laser Welded
Bullet6: Reversible Handle
Bullet7: Easily Adjustable Pack Nut
Bullet8: Triple Sealed Stem
Bullet9: Silicon Performance Bronze® Body
Country: US
Height: 5.100
Length: 15.300
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The reducing coupling features solder cups. The fitting provides a means of connecting larger size tube to smaller size tube. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706UJX8
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Bullet8: UL 207 Recognized to 700 PSI (select diameters)
Bullet9: Material, workmanship and dimensions per MSS SP-109 (5" to 8")
Item Description
The NIBCO® bronze check valve features solder end connections for ease of installation. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8QWH
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 366°F/185°C, 300 psi/20.7 bar non-shock cold working pressure, Regrindable seat, Renewable PTFE disc
Bullet5: Class 150 solder end connections
Bullet6: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet7: Conforms to MSS SP-80
Country: US
Description: Check Valve - Bronze, Bolted Bonnet
Height: 4.690
Length: 9.560
Made to Order: Yes
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close, and bubble-tight shutoff at 600 PSI. The PTFE seat ring and brass hard chrome plated ball exhibits high chemical resistance properties and is recommended for many high pressure applications. Options include NIB-SEAL® insulated handle that eliminates condensate. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HCNNJ
Width:
Height:
Extra Data: Chrome plated brass ball, silicon bronze stem, Full port, Maximum temperature rating 400°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Conforms to MSS SP-110
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle or locking lever, optional NIB-SEAL®
Bullet7: Solder end connections
Bullet8: Dezincification resistant
Bullet9: Use in U.S. drinking water applications is prohibited after January 3, 2014
Country: US
Description: Three-Piece Bronze Ball Valve - Full Port, Solder End Connections
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The wafer type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve includes an arrow on the body to indicate the recommended flow direction. It includes a one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the powder coated epoxy finish, direct mount actuation, integrally cast disc-stop and dual offset design. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose Sure Seal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70J42VT
Width:
Height:
Extra Data: Blowout-proof stem, Seats: MEPTFE, PTFE UHMWPE, ETFE, PFA, Standard operating temperature -20°F to 482°F, Wafer style
Bullet10: MSS SP-68 (design) 100% production tested
Bullet5: Stainless steel disc and stem
Bullet6: Integrally cast disc stop
Bullet7: Dual offset design
Bullet8: Direct mount actuation
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.