Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. Designed for use with water, oil, glycol mix in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076ZDY
Width:
Height:
Extra Data: Avoids Precise Calculation, Combines Webstone Isolator and Ball Drain With Closely Spaced Tee, Eliminates Costly Field Fabrication, The Ideal Solution for Most Near Boiler Piping or Secondary Loops
Bullet10: Certified to NSF/ANSI 61
Bullet5: Simplifies Future Maintenance
Bullet6: Saves 144 Minutes
Bullet7: Replaces 17 Components
Bullet8: Eliminates 16 Leakpaths
Bullet9: Available in FIP, SWT, PRS x FIP
Country: CN
Height: 4.530
Length: 9.920
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve features a unique molded-in Buna-N seat with stainless steel disc recommended for chemical applications the liner compatibility will permit. The internal stem/disc geometric drive design eliminates the need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMVLF
Width:
Height:
Extra Data: Buna-N molded-in seat liner, Maximum 180°F service, Valve pressure rating 100 psi, Wafer style, actuated
AltImageName1: /NBC/WD30223.jpg
AltImageName2: /NBC/WD30223.jpg
AltImagePath1: /NBC-WD30223.JPEG
AltImagePath2: /NBC-WD30223.JPEG
Bullet10: Not recommended for steam service
Bullet5: Stainless steel disc
Bullet6: Stainless steel stem with stainless steel bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem for use with pneumatic or electric actuators
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. Designed for use with in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076ZE3
Width:
Height:
Extra Data: Avoids Precise Calculation, Combines Webstone Isolator and Ball Drain With Closely Spaced Tee, Eliminates Costly Field Fabrication, The Ideal Solution for Most Near Boiler Piping or Secondary Loops
Bullet5: Simplifies Future Maintenance
Bullet6: Saves 144 Minutes
Bullet7: Replaces 17 Components
Bullet8: Eliminates 16 Leakpaths
Bullet9: Certified to NSF/ANSI 61
Country: CN
Height: 4.330
Length: 9.920
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® flanged cast iron gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L43M
Width:
Height:
Extra Data: 250 psi/17.2 bar saturated steam to 406°F/207°C, 500 psi/34.5 bar non-shock cold working pressure, Bolted bonnet, Non-rising stem
Bullet5: Solid wedge
Bullet6: Iron body bronze mounted (IBBM)
Bullet7: Class 250 flanged end connections
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. Designed for use with water, oil, glycol mix in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079T8K
Width:
Height:
Extra Data: Avoids Precise Calculation, Combines Webstone Isolator and Ball Drain With Closely Spaced Tee, Eliminates Costly Field Fabrication, The Ideal Solution for Most Near Boiler Piping or Secondary Loops
Bullet10: Certified to NSF/ANSI 61
Bullet5: Simplifies Future Maintenance
Bullet6: Saves 144 Minutes
Bullet7: Replaces 17 Components
Bullet8: Eliminates 16 Leakpaths
Bullet9: Available in FIP, SWT, PRS x FIP
Country: CN
Height: 4.500
Length: 9.900
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
899 Sanitary (lined) Butterfly Valves for sanitary applications in Chemical and Food Processing Industries. Wafer style available in eleven sizes (from 1” to 12”) have Ductile Iron bodies lined with PTFE seat to meet a broad range of chemical compatibility requirements. Standard PTFE encapsulated 25-5 duplex SS disc & stem is twice as strong as PTFE encapsulated 316 SS. Valve body is two piece allowing for easy seat replacement and disc/stem replacement.
Item ID: 70J19ZX
Width:
Height:
Extra Data: Seats: PTFE, FDA EPDM, FDA Nitrile (Black or White) or fluorocarbon, Standard operating temperature -40°F to 350°F, Valve pressure rating 100 psi, Wafer style
Bullet5: One-piece PTFE/25-5 duplex SS disc/stem
Country: US
Height: 4.610
Length: 14.770
Made to Order: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. Designed for use with in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079T8T
Width:
Height:
Extra Data: Avoids Precise Calculation, Combines Webstone Isolator and Ball Drain With Closely Spaced Tee, Eliminates Costly Field Fabrication, The Ideal Solution for Most Near Boiler Piping or Secondary Loops
Bullet5: Simplifies Future Maintenance
Bullet6: Saves 144 Minutes
Bullet7: Replaces 17 Components
Bullet8: Eliminates 16 Leakpaths
Bullet9: Certified to NSF/ANSI 61
Country: CN
Height: 4.330
Length: 9.920
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
899 Sanitary (lined) Butterfly Valves for sanitary applications in Chemical and Food Processing Industries. Wafer style available in eleven sizes (from 1” to 12”) have Ductile Iron bodies lined with PTFE seat to meet a broad range of chemical compatibility requirements. Standard PTFE encapsulated 25-5 duplex SS disc & stem is twice as strong as PTFE encapsulated 316 SS. Valve body is two piece allowing for easy seat replacement and disc/stem replacement.
Item ID: 70J19ZU
Width:
Height:
Extra Data: Seats: PTFE, FDA EPDM, FDA Nitrile (Black or White) or fluorocarbon, Standard operating temperature -40°F to 350°F, Valve pressure rating 100 psi, Wafer style
Bullet5: One-piece PTFE/25-5 duplex SS disc/stem
Country: US
Height: 4.630
Length: 14.770
Made to Order: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. Designed for use with water, oil, glycol mix in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076ZDP
Width:
Height:
Extra Data: Avoids Precise Calculation, Combines Webstone Isolator and Ball Drain With Closely Spaced Tee, Eliminates Costly Field Fabrication, The Ideal Solution for Most Near Boiler Piping or Secondary Loops
Bullet10: Certified to NSF/ANSI 61
Bullet5: Simplifies Future Maintenance
Bullet6: Saves 126 Minutes
Bullet7: Replaces 17 Components
Bullet8: Eliminates 14 Leakpaths
Bullet9: Available in FIP, SWT, PRS x FIP
Country: CN
Height: 4.530
Length: 9.920
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique molded-in EPDM seat liner with aluminum bronze disc is recommended for most water applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® cast iron butterfly valves for versatile and economical valve applications in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HQW72
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Lug style, Valve pressure rating 200 psi
AltImageName1: /NBC/LC2000.jpg
AltImageName2: /NBC/LC2000.jpg
AltImagePath1: /NBC-LC2000.JPEG
AltImagePath2: /NBC-LC2000.JPEG
Bullet10: Lead-free*
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. Designed for use with water, oil, glycol mix in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079T84
Width:
Height:
Extra Data: Avoids Precise Calculation, Combines Webstone Isolator and Ball Drain With Closely Spaced Tee, Eliminates Costly Field Fabrication, The Ideal Solution for Most Near Boiler Piping or Secondary Loops
Bullet10: Certified to NSF/ANSI 61
Bullet5: Simplifies Future Maintenance
Bullet6: Saves 126 Minutes
Bullet7: Replaces 17 Components
Bullet8: Eliminates 14 Leakpaths
Bullet9: Available in FIP, SWT, PRS x FIP
Country: CN
Height: 4.500
Length: 9.900
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
LBFV Lug style Lined Butterfly Valves feature “the most effective technology” available for controlling and isolating corrosive, high-purity & abrasive process media. ISO 5211 mounting flange provides direct mounted actuation on 2” to 24” sizes. One piece spherically machined disc/stem is encapsulated (min 3 mm) with interlocked PFA rated for full vacuum and thermal cycling eliminates permeation and possible delamination. Split body available in A395 Ductile Iron or 316 SS; disc/stem available in multiple materials (check with factory) with pneumatic or electric actuation options.
Item ID: 70J45R9
Width:
Height:
Extra Data: Lug style, One-piece PFA/25-5 duplex SS disc/stem, Seats: MEPTFE, PTFE UHMWPE, ETFE, PFA, Valve pressure rating 150 psi 2"-10" and 100 psi 12"-24"
Bullet5: Viton elastomer
Country: US
Height: 4.020
Length: 11.210
Made to Order: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The female adapter features a male solder end and female NPT thread. These fittings provide a means for adapting a solder connection to a threaded connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XRH0
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.18, Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron lug butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design, there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in Buna-N seat liner with CF8M stainless steel disc & stem for non-water applications. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJYTR
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, Buna-N molded-in seat liner, Lug style, Valve pressure rating 200 psi
Bullet10: Designed to meet MSS SP-67
Bullet5: CF8M stainless steel disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The female adapter features a male solder end and female NPT thread. These fittings provide a means for adapting a solder connection to a threaded connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XRGY
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.18, Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides a unique molded-in EPDM seat liner with aluminum bronze disc, recommended for most water applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HK0PT
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Lug style, actuated, Valve pressure rating 100 psi
AltImageName1: /NBC/LD20003.jpg
AltImageName2: /NBC/LD20003.jpg
AltImagePath1: /NBC-LD20003.JPEG
AltImagePath2: /NBC-LD20003.JPEG
Bullet10: Lead-free*
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Extended neck
Bullet8: Geometric drive
Bullet9: Operating mechanism: Bare stem for use with pneumatic or electric actuators
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The ABS DWV 45-degree street wye features a spigot x hub x hub connection and allows for a connection to be made in continuous pipe line and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707A118
Width:
Height:
Finish: Black
Extra Data: ASTM D2665, CSA B181.1, Do not test or use with compressed air or other gases, Service temperature -40°F to 180°F
Bullet5: ASTM D3965
Bullet6: ASTM D2661 and D3311
Bullet7: UL Listed 94V-0
Bullet8: NSF/ANSI Standard 14
Bullet9: NSF U.P. Certified
Country: US
Description: 45 degrees Street Wye Spg x H x H - ABS DWV
Finish Family: Black
Height: 3.950
Length: 9.620
Low Lead: Yes
MadeInUSA: Yes
Material: Acrylonitrile Butadiene Styrene
Minimum Order Quantity: 20
Prop65: This product can expose you to Styrene, a chemical known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides a unique molded-in EPDM seat liner with aluminum bronze disc, recommended for most water applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMYGH
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Valve pressure rating 100 psi, Wafer style, actuated
AltImageName1: /NBC/WD20003.jpg
AltImageName2: /NBC/WD20003.jpg
AltImagePath1: /NBC-WD20003.JPEG
AltImagePath2: /NBC-WD20003.JPEG
Bullet10: Lead-free*
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Extended neck
Bullet8: Geometric drive
Bullet9: Operating mechanism: Bare stem for use with pneumatic or electric actuators
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. The two-piece valve is recommended for many applications, including HVAC, hot and cold potable water, and non-potable process water. The lever handle provides convenient quarter-turn operation and bubble-tight shutoff. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. NIBCO Press System® valves are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707KX86
Width:
Height:
Extra Data: Full port, Maximum service temperature 250°F, Two-piece body, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Dezincification resistant
Bullet5: Silicon bronze stem
Bullet6: Reinforced PTFE seat rings
Bullet7: Press x press female end connections
Bullet8: Press leak-detection feature
Bullet9: Multiple handle options, including NIB-Seal®
Country: US
Description: Ball Valve - Bronze, 250 PSI
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC.
Height: 2.460
Length: 6.640
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The wafer type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve includes an arrow on the body to indicate the recommended flow direction. It includes a one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the powder coated epoxy finish, direct mount actuation, integrally cast disc-stop and dual offset design. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose Sure Seal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70J42WL
Width:
Height:
Extra Data: Blowout-proof stem, Seats: Glass reinforced PTFE (standard); PTFE; UHMWPE, Standard operating temperature -20°F to 482°F, Wafer style
Bullet10: MSS SP-68 (design) 100% production tested
Bullet5: Stainless steel disc and stem
Bullet6: Integrally cast disc stop
Bullet7: Dual offset design
Bullet8: Direct mount actuation
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features NPT end connections for easy installation. Options include NIB-SEAL® insulated handle that eliminates condensate. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFT68
Width:
Height:
Extra Data: Chrome plated brass ball, silicon bronze stem, Conventional port, Maximum temperature rating 400°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle
Bullet7: Dezincification resistant
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 3.100
Length: 8.900
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides a unique molded-in EPDM seat liner with aluminum bronze disc, recommended for most water applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HK0PU
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Lug style, actuated, Valve pressure rating 100 psi
AltImageName1: /NBC/LD20003.jpg
AltImageName2: /NBC/LD20003.jpg
AltImagePath1: /NBC-LD20003.JPEG
AltImagePath2: /NBC-LD20003.JPEG
Bullet10: Lead-free*
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Extended neck
Bullet8: Geometric drive
Bullet9: Operating mechanism: Bare stem for use with pneumatic or electric actuators
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® check valve features a screw-in bonnet for accessibility to repair or replace parts. Swing check valves may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCXDU
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, FKM seat disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 125 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-80
Country: US
Description: Check Valve - Bronze, Class 125, FKM Seat Disc
Height: 1.950
Length: 3.560
Made to Order: Yes
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
899 Sanitary (lined) Butterfly Valves for sanitary applications in Chemical and Food Processing Industries. Wafer style available in eleven sizes (from 1” to 12”) have Ductile Iron bodies lined with PTFE seat to meet a broad range of chemical compatibility requirements. Standard PTFE encapsulated 25-5 duplex SS disc & stem is twice as strong as PTFE encapsulated 316 SS. Valve body is two piece allowing for easy seat replacement and disc/stem replacement.
Item ID: 70J19ZV
Width:
Height:
Extra Data: Seats: PTFE, FDA EPDM, FDA Nitrile (Black or White) or fluorocarbon, Standard operating temperature -40°F to 350°F, Valve pressure rating 100 psi, Wafer style
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site