Item Description
The NIBCO® bronze check valve features threaded end connections for ease of installation. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCXFN
Width:
Height:
Extra Data: 200 psi/13.8 bar saturated steam to 391°F/201°C, 400 psi/27.6 bar non-shock cold working pressure, Renewable bronze disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 200 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-80
Country: US
Description: Check Valve - Bronze, Class 200 Threaded
Height: 1.730
Length: 2.940
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique molded-in Buna-N seat liner with stainless steel disc is recommended for chemical applications the liner compatibility will permit. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJXTF
Width:
Height:
Extra Data: Lug style, Maximum 180°F service, NBR molded-in seat liner, Valve pressure rating 250 psi
AltImageName1: /NBC/LD30223.jpg
AltImageName2: /NBC/LD30223.jpg
AltImagePath1: /NBC-LD30223.JPEG
AltImagePath2: /NBC-LD30223.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Stainless steel disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Extended neck
Bullet8: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The cross features solder cups. This fitting provides a means for a connection to be made in continuous pipe line and branch out in two different directions. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item Description
The NIBCO® ductile iron butterfly valve features a unique molded-in Buna-N seat with stainless steel disc recommended for chemical applications the liner compatibility will permit. The internal stem/disc geometric drive design eliminates the need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJXT5
Width:
Height:
Extra Data: Buna-N molded-in seat liner, Lug style, actuated, Maximum 180°F service, Valve pressure rating 100 psi
AltImageName1: /NBC/LD30223.jpg
AltImageName2: /NBC/LD30223.jpg
AltImagePath1: /NBC-LD30223.JPEG
AltImagePath2: /NBC-LD30223.JPEG
Bullet10: Not recommended for steam service
Bullet5: Stainless steel disc
Bullet6: Stainless steel stem with stainless steel bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem for use with pneumatic or electric actuators
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO® Press System® fittings are the fastest, easiest way to join copper tubing systems in residential and commercial potable, hot, chilled and process water applications for plumbing and HVAC systems. The press fittings can also be installed underground. The NIBCO® Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO® Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® Press System® copper fittings are backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XMJE
Width:
Height:
Extra Data: Dezincification resistant, Lead-free*, Operating pressure 200 psi cwp, Temperature range -20°F to 250°F
Bullet5: ASTM B75 Alloy C12200 Copper
Bullet6: Complies with ASME B16/51 Performance
Bullet7: Third party certified to UPC
Bullet8: Third party certified to the performance requirements of CSA MSE 13 and PS-117
Item Description
The NIBCO® ductile iron lug butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design, there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in EPDM seat liner with CF8M stainless steel disc & stem is recommended for most water applications. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJYU1
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Lug style, Valve pressure rating 200 psi
Bullet10: Designed to meet MSS SP-67
Bullet5: CF8M stainless steel disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The male adapter features a male solder end and male NPT thread. These fittings provide a means for adapting a solder connection to a threaded connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XRJ2
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.18, Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The lug type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve also provides bi-directional dead-end service and includes an arrow on the body to indicate the recommended flow direction. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the 316 stainless steel body, direct mount actuation, integrally cast disc-stop and dual offset design, one-piece, blowout-proof 316 stainless steel stem with 304 stainless steel bushings PTFE coated. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose SureSeal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70U05MX
Width:
Height:
Extra Data: Blowout-proof stem, Lug style, Seats: Glass reinforced PTFE (standard); PTFE; UHMWPE, Standard operating temperature -20°F to 482°F
Bullet10: MSS SP-68 (design) 100% production tested
Bullet5: Stainless steel disc and stem
Bullet6: Integrally cast disc stop
Bullet7: Dual offset design
Bullet8: Direct mount actuation
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The tee features solder cups. The fitting allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XLKF
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: Material, workmanship and dimensions per MSS SP-109 (5" to 8")
Bullet8: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Bullet9: UL 207 Recognized to 700 PSI (select diameters)
Item Description
The lug type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve also provides bi-directional dead-end service and includes an arrow on the body to indicate the recommended flow direction. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the powder coated epoxy finish, direct mount actuation, integrally cast disc-stop and dual offset design, one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose Sure Seal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70J42UY
Width:
Height:
Extra Data: Lug style, Seats: Glass reinforced PTFE (standard); PTFE; UHMWPE, Standard operating temperature -20°F to 482°F, Valve pressure rating 285 psi
Bullet10: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The lead-free ball valve provides bubble-tight shutoff at 600 PSI. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO® valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HCPK9
Width:
Height:
Extra Data: Blowout-proof stem, Full port, Silicon Performance Bronze® ball and stem, Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
Bullet10: Lead-free*
Bullet5: PTFE Seats
Bullet6: White handle for easy lead-free* identification
Bullet7: NIBCO® double-oval lead-free body marking
Bullet8: Threaded end connections
Bullet9: Dezincification resistant
Country: MX
Description: The NIBCO ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The lead-free ball valve provides bubble-tight shutoff at 600 PSI. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering
Height: 2.900
Length: 9.050
Minimum Order Quantity: 2
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The union features a solder cup and male NPT threads. The fitting is used to allow repair to the line without damage as well as adapt from a solder connection to a threaded connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 7070LC7
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.18, Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features thread ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO® valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFY2P
Width:
Height:
Extra Data: Blowout-proof stem, Full port, Silicon Performance Bronze® ball and stem, Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
Bullet10: Lead-free*
Bullet5: PTFE Seats
Bullet6: White handle for easy lead-free* identification
Bullet7: NIBCO® double-oval lead-free body marking
Bullet8: Threaded end connections
Bullet9: Dezincification resistant
Country: MX
Description: The NIBCO ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features thread ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and
Height: 2.900
Length: 8.730
Minimum Order Quantity: 2
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Description: Check Valve - 3% Nickel Iron Body, Stainless Steel Trim
Height: 9.000
Length: 11.500
Made to Order: Yes
MadeInUSA: Yes
Material: Ductile Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® check valve features a screw-in bonnet for accessibility to repair or replace parts. Swing check valves may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8QUX
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Renewable PTFE disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 125 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-139
Country: US
Description: Check Valve - Bronze, Class 125, PTFE Seat Disc
Height: 1.460
Length: 2.000
Made to Order: Yes
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The fitting reducer features a male solder end and solder cup. The fitting provides a means for reducing the size of a line. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706UKYZ
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
AltImageName1: /NBC/600-2.jpg
AltImageName2: /NBC/600-2.jpg
AltImagePath1: /NBC-600-2.JPEG
AltImagePath2: /NBC-600-2.JPEG
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: Material, workmanship and dimensions per MSS SP-109 (5" to 8")
Bullet8: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Bullet9: UL 207 Recognized to 700 PSI (select diameters)
Country: US
Description: The fitting reducer features a male solder end and solder cup. The fitting provides a means for reducing the size of a line. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent
Item Description
The NIBCO® bronze gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® gate valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCRKR
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 353°F, 300 psi/20.7 bar non-shock cold working pressure, Rising stem, Solid wedge
Bullet5: Union bonnet
Bullet6: Class 150 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Dezincification resistant
Bullet9: Conforms to MSS SP-80
Country: US
Description: Gate Valve - Bronze, Rising Stem, Union Bonnet, Threaded
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The PVC DWV vent tee features a hub x hub x hub connection and the abrupt 90-degree angle on the outlet is used to change the direction of flow in the venting side of the system. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707DWUT
Width:
Height:
Finish: White
Extra Data: ASTM D2665 and D3311, Maximum service temperature 140°F, Not for use with compressed air or other gases, NSF/ANSI Standard 14
Item Description
The NIBCO® bronze check valve features threaded end connections for ease of installation. It features a screw-in bonnet for accessibility to repair or replace parts. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCXE7
Width:
Height:
Extra Data: 200 psi/13.8 bar non-shock cold working pressure, Regrindable seat, Renewable Buna-N disc, Y-pattern
Bullet5: Class 125 threaded end connections
Bullet6: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The fitting reducer features a male solder end and solder cup. The fitting provides a means for reducing the size of a line. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706UKYW
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
AltImageName1: /NBC/600-2.jpg
AltImageName2: /NBC/600-2.jpg
AltImagePath1: /NBC-600-2.JPEG
AltImagePath2: /NBC-600-2.JPEG
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: Material, workmanship and dimensions per MSS SP-109 (5" to 8")
Bullet8: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Bullet9: UL 207 Recognized to 700 PSI (select diameters)
Country: US
Description: The fitting reducer features a male solder end and solder cup. The fitting provides a means for reducing the size of a line. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent
Item Description
The NIBCO® bronze gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® gate valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCRL4
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 366°F/185°C, 300 psi/20.7 bar non-shock cold working pressure, Non-rising stem, Solid wedge
Bullet5: Union bonnet
Bullet6: Class 150 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Dezincification resistant
Bullet9: Conforms to MSS SP-80
Country: US
Description: Gate Valve - Bronze, Non-Rising Stem, Union Bonnet, Threaded
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The fitting reducer features a male solder end and solder cup. The fitting provides a means for reducing the size of a line. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706UKYX
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
AltImageName1: /NBC/600-2.jpg
AltImageName2: /NBC/600-2.jpg
AltImagePath1: /NBC-600-2.JPEG
AltImagePath2: /NBC-600-2.JPEG
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: Material, workmanship and dimensions per MSS SP-109 (5" to 8")
Bullet8: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Bullet9: UL 207 Recognized to 700 PSI (select diameters)
Country: US
Description: The fitting reducer features a male solder end and solder cup. The fitting provides a means for reducing the size of a line. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent
Item Description
The NIBCO® bronze gate valve may be used in commercial and industrial applications, HVAC, specifically for steam, and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® gate valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCTH2
Width:
Height:
Extra Data: 200 psi/13.8 bar saturated steam to 391°F/201°C, 400 psi/20.7 bar non-shock cold working pressure, Alloy solid wedge, Rising stem
Bullet10: Conforms to MSS SP-80
Bullet5: Union bonnet
Bullet6: Integral seat
Bullet7: Class 200 threaded end connections
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet9: Dezincification resistant
Country: US
Description: Gate Valve - Bronze, Class 200, Block Pattern
Height: 2.520
Length: 7.140
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valves provide ease of operation with quarter-turn (90 degrees) open to close. The unique molded-in Buna-N seat liner with aluminum bronze disc provides good abrasion resistance properties and compatibility with solvents, oil, water and hydraulic fluid for compressed air and vacuum applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMWKU
Width:
Height:
Extra Data: Buna-N molded-in seat liner, Maximum 180°F service, Valve pressure rating 250 psi, Wafer style
AltImageName1: /NBC/WD20003.jpg
AltImageName2: /NBC/WD20003.jpg
AltImagePath1: /NBC-WD20003.JPEG
AltImagePath2: /NBC-WD20003.JPEG
Bullet10: Not recommended for steam service
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.