Extra Data: Lug style, Seats: PTFE, FDA EPDM, FDA Nitrile (Black or White) or fluorocarbon, Standard operating temperature -40 Degrees F to 350 Degrees F, Valve pressure rating 150 psi
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR23N
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Height: 1.000
Length: 6.870
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
SLBV Lined Ball Valves ISO 5211 mounting flange allows direct mounting of actuators, eliminating costly automation hardware. Separate lined ball and stem allows the ball to float, preventing side loading which creates stem leaks. Standard take out dimensions allows the Series 100 valve to replace any standard ball, plug or gate valve. Additional metal-to-metal body joint prevents possible leakage from temperature changes or line stresses - damage to the seal cannot be caused by over tightening. Valve can be used in service ranging from full vacuum up to 250 psi Utilizes interference between the ball and the seats, which under low-pressure, results in a tight shut-off. Lockable hand lever comes standard, allowing user to lock valve in open or closed position. All Sure Seal LBV Series 100 Ball Valves conform to the following specifications: ASME B16.5, ASME B16.10, ASME B16.42, ISO 5211, and MSS-SP25.
Item ID: 70J45U1
Width:
Height:
Extra Data: Flanged style PFA lined body, Seats: PTFE, Two-piece PFA lined ball and stem, Valve pressure rating full vacuum to 250 psi
Country: US
Height: 9.020
Length: 14.420
Made to Order: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® check valve features a screw-in bonnet for accessibility to repair or replace parts. Swing check valves may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8QUK
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Renewable PTFE disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 125 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-139
Country: US
Description: Check Valve - Bronze, Class 125, PTFE Seat Disc
Height: 1.720
Length: 3.340
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 10
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Lug style, Seats: PTFE, FDA EPDM, FDA Nitrile (Black or White) or fluorocarbon, Standard operating temperature -40 Degrees F to 350 Degrees F, Valve pressure rating 150 psi
Bullet5: One-piece 25-5 duplex SS disc/stem
Country: USA
Height: 5.750
Length: 21.43
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® gate valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCQJA
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Rising stem, Solid wedge
Bullet5: Screw-in bonnet
Bullet6: Class 125 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Swing checks may be installed in horizontal positions (or vertical with flow moving up). With its ductility, the valve displays higher physical properties than standard grey cast iron. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70TZXUR
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 366°F/185°C, 250 psi/17.2 bar non-shock cold working pressure, Bolted bonnet, Renewable seat and disc
Bullet5: Iron body, bronze mounted (IBBM)
Bullet6: Stainless steel trim
Bullet7: Class 150 flanged end connections
Bullet8: Conforms to MSS SP-136
Country: US
Description: Check Valve - Class 150, Stainless Steel Trim
Height: 13.500
Length: 20.620
Made to Order: Yes
MadeInUSA: Yes
Material: Ductile Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR15J
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Height: 2.530
Length: 7.210
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Engineered with a modular approach, NIBCO® electric actuation systems offer the flexibility to actuate new valves or to retrofit existing valves with unprecedented ease. Electric actuation systems feature an ISO standard mounting design, assuring long-term industry acceptance. Choose NIBCO® flow control products for the most specified, versatile and economical option in commercial and industrial applications. NIBCO® actuation products are backed by the NIBCO limited warranty.
Item ID: 70J4APG
Width:
Height:
Extra Data: Case hardened steel spur gear train is permanently lubricated, Heater and thermostat installed in all actuators, Operating temperatures -40°F with standard heater activated, to +140°F, Single phase capacitor run motor with thermal overload protection
Bullet10: Torque 3,000 to 10,000 in/lb
Bullet5: Handwheel manual operation
Bullet6: Captive slotted hex bolts on enclosure
Bullet7: Dual machined conduit entrances
Bullet8: Two single-pole double-throw travel-stop limit switches with adjustable cams and two auxiliary SPDT
Bullet9: Female drive shaft
Country: US
Description: Electric Actuators - Max Torque Range, Manual Override
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR22R
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Height: 1.000
Length: 6.140
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® Class 125 cast iron flanged angle valve is recommended for service in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L532
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Bolted bonnet, Bronze mounted trim
Bullet5: Renewable seat and disc
Bullet6: Class 125 flanged end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-85
Country: US
Description: Angle Valve - Cast Iron, Class 125, Bronze Trim
Height: 10.000
Length: 23.000
Made to Order: Yes
MadeInUSA: Yes
Material: Cast Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR15M
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Height: 2.880
Length: 7.620
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® Class 125 cast iron flanged angle valve is recommended for service in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L533
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Bolted bonnet, Bronze mounted trim
Bullet5: Renewable seat and disc
Bullet6: Class 125 flanged end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-85
Country: US
Description: Angle Valve - Cast Iron, Class 125, Bronze Trim
Height: 12.000
Length: 25.880
MadeInUSA: Yes
Material: Cast Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR14M
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Height: 2.530
Length: 8.380
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
LBFV Lug style Lined Butterfly Valves feature “the most effective technology” available for controlling and isolating corrosive, high-purity & abrasive process media. ISO 5211 mounting flange provides direct mounted actuation on 2” to 24” sizes. One piece spherically machined disc/stem is encapsulated (min 3 mm) with interlocked PFA rated for full vacuum and thermal cycling eliminates permeation and possible delamination. Split body available in A395 Ductile Iron or 316 SS; disc/stem available in multiple materials (check with factory) with pneumatic or electric actuation options.
Item ID: 70J45T9
Width:
Height:
Extra Data: Lug style, One-piece PFA/25-5 duplex SS disc/stem, Seats: MEPTFE, PTFE UHMWPE, ETFE, PFA, Valve pressure rating 150 psi 2"-10" and 100 psi 12"-24"
Bullet5: Viton elastomer
Country: US
Height: 8.000
Length: 18.790
Made to Order: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR050
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Height: 2.530
Length: 7.430
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO carbon steel, flanged end ball valve provides bubble-tight shutoff at 740 PSI. The one-piece valve is recommended for industrial, petrochemical, utility service applications. It conforms to Fire Safe and Anti-Static requirements and is tested to API-598 criteria. This valve features a locking handle or manual gear operator. It may be used for isolation and throttling (half open to full open only).
Item ID: 707L071
Width:
Height:
Extra Data: Blowout-proof stem, Maximum temperature rating 400 Degrees F, Stainless steel ball and stem, Valve pressure rating 740 psi 51 bar non-shock cold working pressure
Bullet10: API-607 Fourth Edition Fire Safe
Bullet5: Mounting pad
Bullet6: Vented ball
Bullet7: Locking handle or manual gear operator
Bullet8: Class 300 flanged end connections
Bullet9: Conforms to MSS SP-72
Country: USA
Description: Unibody Carbon Steel Ball Valve - Class 300, Fire Safe
Height: 18.21
Length: 30.38
MadeInUSA: Yes
Material: Carbon Steel
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR23C
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Height: 1.000
Length: 6.550
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron check valve features flanged end connections for easy installation. It is equipped with a bolted bonnet for maintenance accessibility. The swing check valve includes a renewable cast bronze seat and disc. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8MX5
Width:
Height:
Extra Data: 250 psi/17.2 bar saturated steam to 406°F/207°C, 500 psi/34.5 bar non-shock cold working pressure, Bolted bonnet, Renewable bronze seat and disc
AltImageName1: /NBC/F968B.jpg
AltImageName2: /NBC/F968B.jpg
AltImagePath1: /NBC-F968B.JPEG
AltImagePath2: /NBC-F968B.JPEG
Bullet5: Class 250 flanged end connections
Bullet6: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet7: Conforms to MSS SP-71 Type 1
Bullet8: Approved by the New York City BSA 143-69-SA at 350 psi non-shock cold water
Country: US
Description: Check Valve - Iron, Swing, Class 250
Height: 12.500
Length: 17.500
MadeInUSA: Yes
Material: Cast Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR14Q
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Height: 2.880
Length: 8.420
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Engineered with a modular approach, NIBCO® electric and pneumatic actuation systems offer the flexibility to actuate new valves or to retrofit existing valves with unprecedented ease. Both electric and pneumatic actuation systems feature an ISO standard mounting design, assuring long-term industry acceptance. Choose NIBCO® flow control products for the most specified, versatile and economical option in commercial and industrial applications. NIBCO® actuation products are backed by the NIBCO limited warranty.
Item ID: 70TTULL
Width:
Height:
Extra Data: Electric mechanical brake, Hardened steel female drive coupling, Heater and thermostat installed, Permanently lubricated steel gear train
Bullet10: Adjustable mechanical stop at the failsafe location
Bullet5: Operating temperatures -40°F to +140°F
Bullet6: Thermally protected, capacitor run, single phase motor
Bullet7: Clockwise (CW) spring return
Bullet8: Two 1/2" NPT conduit entrances
Bullet9: Captive hex bolts on enclosure
Country: US
Description: Electric Spring Return Actuator - Failsafe, Weatherproof, Corrosion Resistant
Height: 1.000
Length: 15.240
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO makes it easy to balance mechanical and plumbing systems with our new lead-free and dezincification-resistant manual balancing valve. Our lead-free 1805 Series fixed orifice manual balancing valve is faster and easier to set because it does not require any special calculators or meters. Integral pressure temperature ports provide a direct readout across the orifice; optimum flow is quickly and accurately determined by simply measuring the differential pressure. The NIBCO® 1805 manual balancing valves are equipped with a union end that will provide up to a double reduction in inlet connection size. A isolation feature and a memory stop is also provided for system maintenance. The integral memory stop will return the system its origional setting upon completionThe NIBCO® lead-free manual balancing valve provides the ultimate solution for a wide range of application requirements to ensure a balanced plumbing system. NIBCO valves and components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR053
Width:
Height:
Extra Data: Lead-free*, Maximum temperature rating 250°F at 150 psi, Maximum Working Pressure 200 psi @ 230°F, PTFE Seats
Bullet5: EPDM O-Ring
Bullet6: Stainless steel ball and stem
Bullet7: NSF/ANSI/CAN-61 and 372
Country: CN
Description: To Be Determined
Height: 2.530
Length: 7.340
Low Lead: Yes
Material: Lead-Free Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The lug type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve also provides bi-directional dead-end service and includes an arrow on the body to indicate the recommended flow direction. It includes a one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the powder coated epoxy finish, direct mount actuation, integrally cast disc-stop and dual offset design. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose Sure Seal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70HY6DF
Width:
Height:
Extra Data: Glass reinforced PTFE seats, Lug style, Maximum operating temperature 400°F at 100 psi, Valve pressure rating 740 psi
Bullet10: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze angle valve is recommended for service in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCWEP
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Integral seat, Screw-in bonnet
Bullet5: Renewable seat disc PTFE
Bullet6: Class 125 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Dezincification resistant
Bullet9: Conforms to MSS SP-80
Country: US
Description: The NIBCO bronze angle valve is recommended for service in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resi
Height: 2.500
Length: 4.690
Made to Order: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site