Item Description
The lug type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve also provides bi-directional dead-end service and includes an arrow on the body to indicate the recommended flow direction. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the powder coated epoxy finish, direct mount actuation, integrally cast disc-stop and dual offset design, one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose Sure Seal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70HY8AM
Width:
Height:
Extra Data: Lug style, Seats: Glass reinforced PTFE (standard); PTFE; UHMWPE, Standard operating temperature -20°F to 482°F, Valve pressure rating 285 psi
Bullet10: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Pressing tools, jaws and chain sets are an integral part of ensuring a reliable, permanent connection between copper piping and NIBCO Press System® fittings and valves. Use only pressing tools, jaws and chain sets that have been tested and approved for use with NIBCO Press System® fittings and valves. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains.
Item ID: 70HXZKV
Width:
Height:
Extra Data: Creates leak-free connections, No flame, solder or flux, Use with PC-280 or PC-100 press tools
AltImageName1: /NBC/PRESSJAWSMALL.jpg
AltImageName2: /NBC/PRESSJAWSMALL.jpg
AltImagePath1: /NBC-PRESSJAWSMALL.JPEG
AltImagePath2: /NBC-PRESSJAWSMALL.JPEG
Country: DE
Description: Pressing Jaw - 3/4-in. Standard
Disclaimer: NIBCO Press System pecent is a registered trademark of NIBCO INC.
Item Description
LBFV Lug style Lined Butterfly Valves feature “the most effective technology” available for controlling and isolating corrosive, high-purity & abrasive process media. ISO 5211 mounting flange provides direct mounted actuation on 2” to 24” sizes. One piece spherically machined disc/stem is encapsulated (min 3 mm) with interlocked PFA rated for full vacuum and thermal cycling eliminates permeation and possible delamination. Split body available in A395 Ductile Iron or 316 SS; disc/stem available in multiple materials (check with factory) with pneumatic or electric actuation options.
Item ID: 70J45TJ
Width:
Height:
Extra Data: Lug style, One-piece PFA/25-5 duplex SS disc/stem, Seats: MEPTFE, PTFE UHMWPE, ETFE, PFA, Valve pressure rating 150 psi 2"-10" and 100 psi 12"-24"
Bullet5: Viton elastomer
Country: US
Height: 12.000
Length: 21.210
Made to Order: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Pressing tools, jaws and chain sets are an integral part of ensuring a reliable, permanent connection between copper piping and NIBCO Press System® fittings and valves. Use only pressing tools, jaws and chain sets that have been tested and approved for use with NIBCO Press System® fittings and valves. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains.
Item ID: 70HXZKW
Width:
Height:
Extra Data: Creates leak-free connections, No flame, solder or flux, Use with PC-280 or PC-100 press tools
AltImageName1: /NBC/PRESSJAWSMALL.jpg
AltImageName2: /NBC/PRESSJAWSMALL.jpg
AltImagePath1: /NBC-PRESSJAWSMALL.JPEG
AltImagePath2: /NBC-PRESSJAWSMALL.JPEG
Country: DE
Description: Pressing Jaw - 1-in. Standard
Disclaimer: NIBCO Press System pecent is a registered trademark of NIBCO INC.
Item Description
The lug type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve also provides bi-directional dead-end service and includes an arrow on the body to indicate the recommended flow direction. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the powder coated epoxy finish, direct mount actuation, integrally cast disc-stop and dual offset design, one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose Sure Seal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70HY8AP
Width:
Height:
Extra Data: Lug style, Seats: Glass reinforced PTFE (standard); PTFE; UHMWPE, Standard operating temperature -20°F to 482°F, Valve pressure rating 285 psi
Bullet10: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Pressing tools, jaws and chain sets are an integral part of ensuring a reliable, permanent connection between copper piping and NIBCO Press System® fittings and valves. Use only pressing tools, jaws and chain sets that have been tested and approved for use with NIBCO Press System® fittings and valves. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains.
Item ID: 70HXZKX
Width:
Height:
Extra Data: Creates leak-free connections, No flame, solder or flux, Use with PC-280 or PC-100 press tools
AltImageName1: /NBC/PRESSJAWSMALL.jpg
AltImageName2: /NBC/PRESSJAWSMALL.jpg
AltImagePath1: /NBC-PRESSJAWSMALL.JPEG
AltImagePath2: /NBC-PRESSJAWSMALL.JPEG
Country: DE
Description: Pressing Jaw - 1-1/4-in. Standard
Disclaimer: NIBCO Press System pecent is a registered trademark of NIBCO INC.
Item Description
The NIBCO® carbon steel ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve is equipped with mounting pad for actuation purposes. The carbon filled PTFE seat ring, graphite and braided graphite stem packing and stainless steel ball and stem exhibit high chemical resistance properties. Please refer to NIBCO technical data sheets, valve selection guides, chemical resistance guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and industrial applications. NIBCO® ball valves are backed by the exclusive NIBCO INC. 5-year 125% limited warranty.
Item ID: 707L13X
Width:
Height:
Extra Data: Blowout-proof stem, Maximum temperature rating 400°F, Split body, full port design, Valve pressure rating 285 psi 19.7 bar non-shock cold working pressure
AltImageName1: /NBC/F515CSF.jpg
AltImageName2: /NBC/F515CSF.jpg
AltImagePath1: /NBC-F515CSF.JPEG
AltImagePath2: /NBC-F515CSF.JPEG
Bullet10: Class 150 flanged end connections
Bullet5: Stainless steel ball and stem
Bullet6: Multiple V-ring packing
Bullet7: Mounting pad
Bullet8: Vented ball
Bullet9: Locking handle or manual gear operator
Country: US
Description: Split-body Carbon Steel Ball Valve - Full Port, Class 150
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Pressing tools, jaws and chain sets are an integral part of ensuring a reliable, permanent connection between copper piping and NIBCO Press System® fittings and valves. Use only pressing tools, jaws and chain sets that have been tested and approved for use with NIBCO Press System® fittings and valves. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains.
Item ID: 70HXZKU
Width:
Height:
Extra Data: Creates leak-free connections, No flame, solder or flux, Use with PC-280 or PC-100 press tools
AltImageName1: /NBC/PRESSJAWSMALL.jpg
AltImageName2: /NBC/PRESSJAWSMALL.jpg
AltImagePath1: /NBC-PRESSJAWSMALL.JPEG
AltImagePath2: /NBC-PRESSJAWSMALL.JPEG
Country: DE
Description: Pressing Jaw - 1/2-in. Standard
Disclaimer: NIBCO Press System pecent is a registered trademark of NIBCO INC.
Extra Data: Lug style, Seats: PTFE, FDA EPDM, FDA Nitrile (Black or White) or fluorocarbon, Standard operating temperature -40 Degrees F to 350 Degrees F, Valve pressure rating 150 psi
Bullet5: One-piece 25-5 duplex SS disc/stem
Country: USA
Height: 5.750
Length: 22.99
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The tee features a solder cup and female NPT threads on the run and a solder cup on the branch. This fitting allows for a connection to be made in continuous pipeline and branch out to a different direction while adapting from a solder connection to a threaded connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The Buna-N cartridge seat liner with aluminum bronze disc provides good abrasion resistance properties and compatibility with solvents, oil, water and hydraulic fluid. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HK0RY
Width:
Height:
Extra Data: Buna-N cartridge seat liner, Lug style, Maximum 180°F service, Valve pressure rating 150 psi
AltImageName1: /NBC/LD10005.jpg
AltImageName2: /NBC/LD10005.jpg
AltImagePath1: /NBC-LD10005.JPEG
AltImagePath2: /NBC-LD10005.JPEG
Bullet10: MSS SP-25 (markings)
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with bronze bushings
Bullet7: Operating mechanism: Bare stem, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Engineered with a modular approach, NIBCO® pneumatic actuation systems offer the flexibility to actuate new valves or to retrofit existing valves with unprecedented ease. Pneumatic actuation systems feature an ISO standard mounting design, assuring long-term industry acceptance. Choose NIBCO® flow control products for the most specified, versatile and economical option in commercial and industrial applications. NIBCO® actuation products are backed by the NIBCO limited warranty.
Item ID: 70U6626
Width:
Height:
Extra Data: Durable extruded anodized aluminum housing, One-piece solid steel shaft, Twin guide bars on pistons assure optimum rack and pinion engagement, Unique 3-point load bearing design for smooth operation
Bullet5: Epoxy coated end caps
Bullet6: ISO 5211 or NIBCO direct mount dimensions
Bullet7: NAMUR standard accessory mounting dimensions
Bullet8: UNC tapping
Country: US
Description: Pneumatic Actuators - Double Acting or Spring Return
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
LBFV Wafer style Lined Butterfly Valves feature “the most effective technology” available for controlling and isolating corrosive, high-purity & abrasive process media. ISO 5211 mounting flange provides direct mounted actuation on 2” to 24” sizes. One piece spherically machined disc/stem is encapsulated (min 3 mm) with interlocked PFA rated for full vacuum and thermal cycling eliminates permeation and possible delamination. Split body available in A395 Ductile Iron or 316 SS; disc/stem available in multiple materials (check with factory) with pneumatic or electric actuation options.
Item ID: 70J44UU
Width:
Height:
Extra Data: One-piece PFA/25-5 duplex SS disc/stem, Seats: MEPTFE, PTFE UHMWPE, ETFE, PFA, Valve pressure rating 150 psi 2"-10" and 100 psi 12", Wafer style
Bullet5: Viton elastomer
Country: US
Height: 5.980
Length: 19.280
Made to Order: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® Safety-Vent® feature provides air exhaust capability while holding full upstream pressure in a closed position. The bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close, and bubble-tight shutoff at 600 PSI. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFR9N
Width:
Height:
Extra Data: Conventional port, Maximum temperature rating 400°F, Safety-Vent® for compressed air lines, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Use in U.S. drinking water applications is prohibited after January 3, 2014
Description: The NIBCO Safety-Vent feature provides air exhaust capability while holding full upstream pressure in a closed position. The bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close, and bubble-tight shutoff at 600 PSI. The
Height: 2.300
Length: 6.800
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The lug type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve also provides bi-directional dead-end service and includes an arrow on the body to indicate the recommended flow direction. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the powder coated epoxy finish, direct mount actuation, integrally cast disc-stop and dual offset design, one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose Sure Seal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70HY8AR
Width:
Height:
Extra Data: Lug style, Seats: Glass reinforced PTFE (standard); PTFE; UHMWPE, Standard operating temperature -20°F to 482°F, Valve pressure rating 285 psi
Bullet10: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The ABS DWV female flush adapter features a spigot x female NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707DTWL
Width:
Height:
Finish: Black
Extra Data: ASTM D2665, CSA B181.1, Do not test or use with compressed air or other gases, Service temperature -40°F to 180°F
Bullet5: ASTM D3965
Bullet6: ASTM D2661
Bullet7: UL Listed 94V-0
Bullet8: NSF/ANSI Standard 14
Bullet9: NSF U.P. Certified
Country: US
Description: Female Flush Adapter Spg x FIPT - ABS DWV
Finish Family: Black
Height: 2.000
Length: 4.970
Low Lead: Yes
MadeInUSA: Yes
Material: Acrylonitrile Butadiene Styrene
Minimum Order Quantity: 10
Prop65: This product can expose you to Styrene, a chemical known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.
Item Description
The NIBCO® resilient wedge, ductile iron, gate valve features Class 125 flanged, flat face or mechanical joint end connections for easy installation and accessibility. Non-rising stem used in conjunction with indicator posts are recommended when positive shutoff and a quick visual indicator of open/closed position is required. The flanged by mechanical end connection allows transition of piping systems (steel to cast iron pipe). It is listed by Underwriters Laboratories of the US and Canada (UL/ULC) and approved by FM Approved. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical, fire protection and industrial applications. NIBCO® pressure rated valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HUYX1
Width:
Height:
Extra Data: 300 psi/20.7 bar non-shock cold working pressure, Bolted bonnet, Non-rising stem, Resilient wedge
AltImageName1: /NBC/FM609RW.jpg
AltImageName2: /NBC/FM609RW.jpg
AltImagePath1: /NBC-FM609RW.JPEG
AltImagePath2: /NBC-FM609RW.JPEG
Bullet5: Epoxy coated body inside and out per AWWA C-550 (coating NSF and FDA certified)
Bullet6: Class 125 flanged x mechanical joint connection
Bullet7: Meets or exceeds performance requirements of AWWA C509 and C515 for 3" and larger valves
Bullet8: Listed by UL/ULC (UL262)
Bullet9: FM Approved
Country: US
Description: Gate Valve - Ductile Iron, Fire Protection, Flanged x Mechanical Joint
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® T-585-70-SSHN bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close, with Stainless Steel Handle and Handle Nut for added corrosion resistance. The two-piece valve features thread ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFT5Z
Width:
Height:
Extra Data: Chrome plated brass ball, silicon bronze stem, Full port, Maximum temperature rating 400°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Conforms to MSS SP-110
Bullet5: Blowout-proof stem
Bullet6: Stainless steel lever handle and handle nut
Bullet7: Threaded end connections
Bullet8: Dezincification resistant
Bullet9: Use in U.S. drinking water applications is prohibited after January 3, 2014
Country: US
Description: Two-Piece Bronze Ball Valve - Full Port, Threaded
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 3.000
Length: 9.700
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 5
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Lug style, Seats: PTFE, FDA EPDM, FDA Nitrile (Black or White) or fluorocarbon, Standard operating temperature -40 Degrees F to 350 Degrees F, Valve pressure rating 150 psi
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® full port bronze ball valve provides bubble-tight shutoff at 600 PSI. The two-piece valve is ideal for commercial and light industrial process applications that may include HVAC, hot and cold domestic water, low pressure steam, compressed air, LP gas and natural gas. The bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFU72
Width:
Height:
Extra Data: Chrome plated brass ball, silicon bronze stem, Male x female threaded end connections, Maximum temperature rating 400°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®
Bullet7: Dezincification resistant
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet9: Conforms to MSS SP-110
Country: US
Description: Two-Piece Bronze Ball Valve - Male x Female Threaded End Connections
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 2.100
Length: 6.700
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The lug type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve also provides bi-directional dead-end service and includes an arrow on the body to indicate the recommended flow direction. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the 316 stainless steel body, direct mount actuation, integrally cast disc-stop and dual offset design, one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose SureSeal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70HY6CP
Width:
Height:
Extra Data: Lug style, Maximum operating temperature 400°F at 100 psi, Seats: Glass reinforced PTFE (standard); PTFE; UHMWPE, Valve pressure rating 285 psi
Bullet10: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The Isolator is a uni-flange ball valve that isolates a circulator pump, allowing virtually no air into the system during pump replacement or service. Its innovative design combines multiple components into a single forged brass body that saves time, labor and space. The Isolator has revolutionized the installation of circulator pumps and has evolved into the largest flanged ball valve program in the industry today, featuring patented technology with further patents pending. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079R9W
Width:
Height:
Extra Data: Easily Isolates the Pump for Replacement, Flange Features a Conical Inlet to Minimize Turbulence, Prevents Electrolysis and Eliminates Galvanic Corrosion, Rotating Flange is Secured by a Snug-Fit Snap-Ring that Provides Greater Control Over Positioning During Installation
Bullet10: Ball valve with integral spring check saves labor, space, and leak paths
Bullet5: Multi-Function Drain Makes the Isolator the Only Valve That Drains From Either Side of the Pump
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
With its ductility, the valve displays higher physical properties than standard grey cast iron. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8LZA
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 366°F/185°C, 250 psi/17.2 bar non-shock cold working pressure, Bolted bonnet, Iron body, bronze mounted (IBBM)
Bullet5: Renewable seat and disc
Bullet6: Bronze mounted trim
Bullet7: Class 150 flanged end connections
Bullet8: Conforms to MSS SP-136
Country: US
Description: Check Valve - Class 150, Ductile Iron
Height: 13.500
Length: 19.500
Made to Order: Yes
MadeInUSA: Yes
Material: Ductile Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The Isolator is a uni-flange ball valve that isolates a circulator pump, allowing virtually no air into the system during pump replacement or service. Its innovative design combines multiple components into a single forged brass body that saves time, labor and space. The Isolator has revolutionized the installation of circulator pumps and has evolved into the largest flanged ball valve program in the industry today, featuring patented technology with further patents pending. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076XH5
Width:
Height:
Extra Data: Easily Isolates the Pump for Replacement, Flange Features a Conical Inlet to Minimize Turbulence, Prevents Electrolysis and Eliminates Galvanic Corrosion, Rotating Flange is Secured by a Snug-Fit Snap-Ring that Provides Greater Control Over Positioning During Installation
Bullet10: Ball valve with integral spring check saves labor, space, and leak paths
Bullet5: Multi-Function Drain Makes the Isolator the Only Valve That Drains From Either Side of the Pump
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.