Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The Buna-N cartridge seat liner with stainless steel disc provides good abrasion resistance properties and compatibility with solvents, oil, water and hydraulic fluid. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HK0RU
Width:
Height:
Extra Data: Double flanged, Lug style, Maximum 180°F service, Valve pressure rating 150 psi
AltImageName1: /NBC/LD10005.jpg
AltImageName2: /NBC/LD10005.jpg
AltImagePath1: /NBC-LD10005.JPEG
AltImagePath2: /NBC-LD10005.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Buna-N cartridge seat liner
Bullet6: Stainless steel disc
Bullet7: Stainless steel stem with stainless steel bushings
Bullet8: Operating mechanism: Bare stem, manual gear operator and pneumatic/electric automation
Bullet9: Not recommended for steam service
Country: CN
Description: The NIBCO ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The Buna-N cartridge seat liner with stainless steel disc provides good abrasion resistance properties and compatibility with solvents, oil, wat
Height: 22.760
Length: 65.040
Material: Ductile Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR52R
Width:
Height:
Extra Data: 200 psi non-shock cold working pressure to 250°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
AltImageName1: /NBC/PCMT1800.jpg
AltImageName2: /NBC/PCMT1800.jpg
AltImagePath1: /NBC-PCMT1800.JPEG
AltImagePath2: /NBC-PCMT1800.JPEG
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - Press Body/ MPT Tailpiece
Length: 5.310
Made to Order: Yes
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The lug type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve also provides bi-directional dead-end service and includes an arrow on the body to indicate the recommended flow direction. It includes a one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the powder coated epoxy finish, direct mount actuation, integrally cast disc-stop and dual offset design. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose Sure Seal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70J135J
Width:
Height:
Extra Data: Glass reinforced PTFE seats, Lug style, Maximum operating temperature 400°F at 100 psi, Valve pressure rating 740 psi
Bullet10: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The PVC DWV soil pipe adapter features a hub x spigot connection and connects PVC DWV pipe and soil pipe. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707DUYA
Width:
Height:
Finish: White
Extra Data: ASTM D2665 and D3311, Do not test or use with compressed air or other gases, Maximum service temperature 140°F, NSF/ANSI Standard 14
Item Description
The lug type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve also provides bi-directional dead-end service and includes an arrow on the body to indicate the recommended flow direction. It includes a one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the powder coated epoxy finish, direct mount actuation, integrally cast disc-stop and dual offset design. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose Sure Seal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70U04Q8
Width:
Height:
Extra Data: Glass reinforced PTFE seats, Lug style, Maximum operating temperature 400°F at 100 psi, Valve pressure rating 740 psi
Bullet10: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR43C
Width:
Height:
Extra Data: 200 psi non-shock cold working pressure to 250°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
AltImageName1: /NBC/TPC1800.jpg
AltImageName2: /NBC/TPC1800.jpg
AltImagePath1: /NBC-TPC1800.JPEG
AltImagePath2: /NBC-TPC1800.JPEG
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - FPT Body X Press Tailpiece
Length: 4.650
Made to Order: Yes
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The wafer type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve includes an arrow on the body to indicate the recommended flow direction. It includes a one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the powder coated epoxy finish, direct mount actuation, integrally cast disc-stop and dual offset design. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose Sure Seal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70J135G
Width:
Height:
Extra Data: Blowout-proof stem, Seats: Glass reinforced PTFE (standard); PTFE; UHMWPE, Standard operating temperature -20°F to 482°F, Wafer style
Bullet10: MSS SP-68 (design) 100% production tested
Bullet5: Stainless steel disc and stem
Bullet6: Integrally cast disc stop
Bullet7: Dual offset design
Bullet8: Direct mount actuation
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Webstone offers a wide array of mixing valves and accessories for a host of applications and system requirements. This particular series of valves is suitable for high-temperature hydronic and/or solar applications. Designed for use with in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 70TWZ5M
Width:
Height:
Extra Data: Heavy Duty Forged Brass Construction, Integral Check Valve on Inlet, Mixes Hot and Cold Water to Pre-Set Output Temperature, Temperature Locking Handle on Select Models
Bullet10: Certified to NSF/ANSI/CAN 61 & 372
Bullet5: Compatible With G1 Fittings
Bullet6: Replacement Checks Also Available
Bullet7: Models available to satisfy all state and federal low-lead laws
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® carbon steel ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve is equipped with mounting pad for actuation purposes. The carbon filled PTFE seat ring, graphite and braided graphite stem packing and stainless steel ball and stem exhibit high chemical resistance properties. Please refer to NIBCO technical data sheets, valve selection guides, chemical resistance guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and industrial applications. NIBCO® ball valves are backed by the exclusive NIBCO INC. 5-year 125% limited warranty.
Item ID: 707L156
Width:
Height:
Extra Data: Blowout-proof stem, Maximum temperature rating 400°F, Split body, full port design, Valve pressure rating 740 psi 51 bar non-shock cold working pressure
Bullet10: Class 300 flanged end connections
Bullet5: Stainless steel ball and stem
Bullet6: Multiple V-ring packing
Bullet7: Mounting pad
Bullet8: Vented ball
Bullet9: Locking handle or manual gear operator
Country: US
Description: Split-body Carbon Steel Ball Valve - Class 300, Full Port
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Webstone offers a wide array of mixing valves and accessories for a host of applications and system requirements. This particular series of valves is suitable for point-of-use or point-of-source applications. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079V83
Width:
Height:
Extra Data: Heavy Duty Forged Brass Construction, Integral Check Valve on Inlet, Mixes Hot and Cold Water to Pre-Set Output Temperature, Temperature Locking Handle on Select Models
Bullet10: Certified to NSF/ANSI/CAN 61 & 372
Bullet5: Compatible With G1 Fittings
Bullet6: Replacement Checks Also Available
Bullet7: Models available to satisfy all state and federal low-lead laws
Bullet8: Available in PEX, MIP, SWT, PRS, PSH, FIP, GMT
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The lug type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve also provides bi-directional dead-end service and includes an arrow on the body to indicate the recommended flow direction. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the 316 stainless steel body, direct mount actuation, integrally cast disc-stop and dual offset design, one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose SureSeal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70J1353
Width:
Height:
Extra Data: Lug style, Maximum operating temperature 400°F at 100 psi, Seats: Glass reinforced PTFE (standard); PTFE; UHMWPE, Valve pressure rating 285 psi
Bullet10: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Webstone offers a wide array of mixing valves and accessories for a host of applications and system requirements. This particular series of valves is suitable for point-of-use applications. Designed for use with water in residential or commercial plumbing systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079V84
Width:
Height:
Extra Data: Heavy Duty Forged Brass Construction, Integral Check Valve on Inlet, Mixes Hot and Cold Water to Pre-Set Output Temperature, Temperature Locking Handle on Select Models
Bullet10: Certified to NSF/ANSI/CAN 61 & 372
Bullet5: Compatible With G1 Fittings
Bullet6: Replacement Checks Also Available
Bullet7: Models available to satisfy all state and federal low-lead laws
Bullet8: Available in MIP, SWT, PRS, PEX, PSH, FIP, GMT
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Check valves prevent backflow by automatically closing when fluid reverses direction. Wafer checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8M09
Width:
Height:
Extra Data: Maximum temperature 200°F/ 93°C, Renewable seat and disc, Spring actuated (1/2 psi cracking pressure), Valve pressure rating 400 psi/27.6 bar non-shock cold working pressure
AltImageName1: /NBC/F910B.jpg
AltImageName2: /NBC/F910B.jpg
AltImagePath1: /NBC-F910B.JPEG
AltImagePath2: /NBC-F910B.JPEG
Bullet5: Class 250 flanged end connections
Bullet6: Lead-free*
Bullet7: Conforms to MSS SP-125
Bullet8: Conforms to MIL-V-18436F
Bullet9: NSF/ANSI/CAN-61 and 372
Country: US
Description: Check Valve - Lead-Free*, Class 250, Flanged, Bronze Seat
Height: 18.750
Length: 28.000
Low Lead: Yes
Made to Order: Yes
MadeInUSA: Yes
Material: Cast Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Webstone offers a wide array of mixing valves and accessories for a host of applications and system requirements. This particular series of valves is suitable for high-temperature hydronic applications. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079V87
Width:
Height:
Extra Data: Heavy Duty Forged Brass Construction, Integral Check Valve on Inlet, Mixes Hot and Cold Water to Pre-Set Output Temperature, Temperature Locking Handle on Select Models
Bullet10: ASSE 1017
Bullet5: Compatible With G1 Fittings
Bullet6: Replacement Checks Also Available
Bullet7: Models available to satisfy all state and federal low-lead laws
Bullet8: Available in PEX, FIP, MIP, SWT, PRS, GMT
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
LBFV Lug style Lined Butterfly Valves feature “the most effective technology” available for controlling and isolating corrosive, high-purity & abrasive process media. ISO 5211 mounting flange provides direct mounted actuation on 2” to 24” sizes. One piece spherically machined disc/stem is encapsulated (min 3 mm) with interlocked PFA rated for full vacuum and thermal cycling eliminates permeation and possible delamination. Split body available in A395 Ductile Iron or 316 SS; disc/stem available in multiple materials (check with factory) with pneumatic or electric actuation options.
Item ID: 70J44VP
Width:
Height:
Extra Data: Lug style, One-piece PFA/25-5 duplex SS disc/stem, Seats: MEPTFE, PTFE UHMWPE, ETFE, PFA, Valve pressure rating 150 psi 2"-10" and 100 psi 12"-24"
Bullet5: Viton elastomer
Country: US
Height: 18.000
Length: 40.620
Made to Order: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The ABS DWV 90-degree elbow with high heel inlet features hub connections and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707DTYK
Width:
Height:
Finish: Black
Extra Data: ASTM D2665, CSA B181.1, Do not test or use with compressed air or other gases, Service temperature -40°F to 180°F
Bullet5: ASTM D3965
Bullet6: ASTM D2661 and D3311
Bullet7: UL Listed 94V-0
Bullet8: NSF/ANSI Standard 14
Bullet9: NSF U.P. Certified
Country: US
Description: 90 degrees Elbow with High Heel Inlet Hub x Hub x Hub - ABS DWV
Disclaimer: Do not use or test with compressed air or other gasses.
Finish Family: Black
Height: 3.960
Length: 7.120
Low Lead: Yes
Made to Order: Yes
MadeInUSA: Yes
Material: Acrylonitrile Butadiene Styrene
Minimum Order Quantity: 20
Prop65: This product can expose you to Styrene, a chemical known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.
Extra Data: Maximum operating temperature 400°F at 100 psi, Valve pressure rating 740 psi
AltImageName1: /NBC/LCS6822-5.jpg
AltImageName2: /NBC/LCS6822-5.jpg
AltImagePath1: /NBC-LCS6822-5.JPEG
AltImagePath2: /NBC-LCS6822-5.JPEG
Country: US
Description: The lug type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve also provides uni-directional dead-end service and includes an arrow on the body to indicate the flow direction. It i
MadeInUSA: Yes
Material: Carbon Steel
Prop65: WARNING: This product can expose you to chemicals including lead, which is
known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® gate valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8MZM
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Non-rising stem, Solid wedge
Bullet5: Screw-in bonnet
Bullet6: Class 125 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The lug type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve also provides uni-directional dead-end service and includes an arrow on the body to indicate the flow direction. It includes a one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the powder coated epoxy finish, direct mount actuation, integrally cast disc-stop and dual offset design. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® high performance butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HN3C1
Width:
Height:
Extra Data: Glass reinforced PTFE seats, Lug style, Maximum operating temperature 400°F at 100 psi, Valve pressure rating 740 psi
Bullet10: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The ABS DWV 90-degree elbow with high heel inlet features hub connections and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707DTYJ
Width:
Height:
Finish: Black
Extra Data: ASTM D2665, CSA B181.1, Do not test or use with compressed air or other gases, Service temperature -40°F to 180°F
Bullet5: ASTM D3965
Bullet6: ASTM D2661 and D3311
Bullet7: UL Listed 94V-0
Bullet8: NSF/ANSI Standard 14
Bullet9: NSF U.P. Certified
Country: US
Description: 90 degrees Elbow with High Heel Inlet Hub x Hub x Hub - ABS DWV
Disclaimer: Do not use or test with compressed air or other gasses.
Finish Family: Black
Height: 3.960
Length: 7.120
Low Lead: Yes
MadeInUSA: Yes
Material: Acrylonitrile Butadiene Styrene
Minimum Order Quantity: 20
Prop65: This product can expose you to Styrene, a chemical known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.
Item Description
LBFV Lug style Lined Butterfly Valves feature “the most effective technology” available for controlling and isolating corrosive, high-purity & abrasive process media. ISO 5211 mounting flange provides direct mounted actuation on 2” to 24” sizes. One piece spherically machined disc/stem is encapsulated (min 3 mm) with interlocked PFA rated for full vacuum and thermal cycling eliminates permeation and possible delamination. Split body available in A395 Ductile Iron or 316 SS; disc/stem available in multiple materials (check with factory) with pneumatic or electric actuation options.
Item ID: 70J44VQ
Width:
Height:
Extra Data: Lug style, One-piece PFA/25-5 duplex SS disc/stem, Seats: MEPTFE, PTFE UHMWPE, ETFE, PFA, Valve pressure rating 150 psi 2"-10" and 100 psi 12"-24"
Bullet5: Viton elastomer
Country: US
Height: 18.500
Length: 40.820
Made to Order: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The reinforced PTFE seat ring, Graphoil stem packing and stainless steel ball/stem exhibits high chemical resistance properties and is recommended for process piping. The one-piece design eliminates leak paths. Please refer to NIBCO technical data sheets, valve selection guides, chemical resistance guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and industrial applications. NIBCO® ball valves are backed by the exclusive NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFQA9
Width:
Height:
Extra Data: Blowout-proof stem, Maximum temperature rating 400°F, Reduced port, Valve pressure rating 2000 psi 138 bar non-shock cold working pressure
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The EPDM cartridge liner with ductile iron, electro nickel plated disc is recommended for most water applications. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HK1P1
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, Double flanged, Lug style, Valve pressure rating 150 psi
Bullet10: Not recommended for steam service
Bullet5: EPDM cartridge seat liner
Bullet6: Nickel electroplated ductile iron disc
Bullet7: Stainless steel stem with bronze bushings
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® Ring Check® valve has solder end connections for ease of installation. This check valve may be installed in horizontal positions or vertical with flow moving up. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8QX8
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, In-line lift-type, Spring actuated (1/2 psi cracking pressure), Valve pressure rating 200 psi/14 bar non-shock cold working pressure
Bullet5: PTFE resilient seat disc
Bullet6: Class 125 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site