Item Description
Webstone offers a wide array of mixing valves and accessories for a host of applications and system requirements. This particular series of valves is suitable for point-of-use applications. Designed for use with water in residential or commercial plumbing systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079U81
Width:
Height:
Extra Data: Heavy Duty Forged Brass Construction, Integral Check Valve on Inlet, Mixes Hot and Cold Water to Pre-Set Output Temperature, Temperature Locking Handle on Select Models
Bullet10: Certified to NSF/ANSI/CAN 61 & 372
Bullet5: Compatible With G1 Fittings
Bullet6: Replacement Checks Also Available
Bullet7: Models available to satisfy all state and federal low-lead laws
Bullet8: Available in MIP, SWT, PRS, PEX, PSH, FIP, GMT
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Webstone offers a wide array of mixing valves and accessories for a host of applications and system requirements. This particular series of valves is suitable for point-of-use applications. Designed for use with water in residential or commercial plumbing systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079V6U
Width:
Height:
Extra Data: Heavy Duty Forged Brass Construction, Integral Check Valve on Inlet, Mixes Hot and Cold Water to Pre-Set Output Temperature, Temperature Locking Handle on Select Models
Bullet10: Certified to NSF/ANSI/CAN 61 & 372
Bullet5: Compatible With G1 Fittings
Bullet6: Replacement Checks Also Available
Bullet7: Models available to satisfy all state and federal low-lead laws
Bullet8: Available in MIP, SWT, PRS, PEX, PSH, FIP, GMT
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Webstone offers a wide array of mixing valves and accessories for a host of applications and system requirements. This particular series of valves is suitable for point-of-use applications. Designed for use with water in residential or commercial plumbing systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079V5M
Width:
Height:
Extra Data: Heavy Duty Forged Brass Construction, Integral Check Valve on Inlet, Mixes Hot and Cold Water to Pre-Set Output Temperature, Temperature Locking Handle on Select Models
Bullet10: Certified to NSF/ANSI/CAN 61 & 372
Bullet5: Compatible With G1 Fittings
Bullet6: Replacement Checks Also Available
Bullet7: Models available to satisfy all state and federal low-lead laws
Bullet8: Available in MIP, SWT, PRS, PEX, PSH, FIP, GMT
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Webstone offers a wide array of mixing valves and accessories for a host of applications and system requirements. This particular series of valves is suitable for point-of-use or point-of-source applications. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079U80
Width:
Height:
Extra Data: Heavy Duty Forged Brass Construction, Integral Check Valve on Inlet, Mixes Hot and Cold Water to Pre-Set Output Temperature, Temperature Locking Handle on Select Models
Bullet10: Certified to NSF/ANSI/CAN 61 & 372
Bullet5: Compatible With G1 Fittings
Bullet6: Replacement Checks Also Available
Bullet7: Models available to satisfy all state and federal low-lead laws
Bullet8: Available in PEX, MIP, SWT, PRS, PSH, FIP, GMT
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The lead-free ball valve provides bubble-tight shutoff at 600 PSI. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO® valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8WQW
Width:
Height:
Extra Data: Full port, Repairable design, Silicon Performance Bronze® trim, Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
Bullet10: Dezincification resistant
Bullet5: Blowout-proof stem
Bullet6: PTFE seats
Bullet7: White handle for easy lead-free* identification
Bullet8: NIBCO® double-oval lead-free body marking
Bullet9: Solder end connections
Country: US
Description: The NIBCO ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The lead-free ball valve provides bubble-tight shutoff at 600 PSI. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering
Height: 1.830
Length: 6.000
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features thread ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFW5H
Width:
Height:
Extra Data: Chrome plated brass ball, silicon bronze stem, Full port, Maximum temperature rating 400°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Conforms to MSS SP-110
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®
Bullet7: Threaded end connections
Bullet8: Dezincification resistant
Bullet9: Use in U.S. drinking water applications is prohibited after January 3, 2014
Country: US
Description: Two-Piece Bronze Ball Valve - Full Port, Threaded
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 1.300
Length: 5.300
Made to Order: Yes
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The lead-free ball valve provides bubble-tight shutoff at 600 PSI. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO® valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFY4K
Width:
Height:
Extra Data: Full port, Repairable design, Silicon Performance Bronze® trim, Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
Bullet10: Dezincification resistant
Bullet5: Blowout-proof stem
Bullet6: PTFE seats
Bullet7: White handle for easy lead-free* identification
Bullet8: NIBCO® double-oval lead-free body marking
Bullet9: Threaded end connections
Country: US
Description: The NIBCO ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The lead-free ball valve provides bubble-tight shutoff at 600 PSI. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering
Height: 1.790
Length: 5.210
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. The two-piece valve is recommended for many applications, including HVAC, hot and cold potable water, and non-potable process water. The lever handle provides convenient quarter-turn operation and bubble-tight shutoff. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. NIBCO Press System® valves are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707KX9C
Width:
Height:
Extra Data: Full port, Maximum service temperature 250°F, Two-piece body, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Dezincification resistant
Bullet5: Silicon bronze stem
Bullet6: Reinforced PTFE seat rings
Bullet7: Press x press female end connections
Bullet8: Press leak-detection feature
Bullet9: Multiple handle options, including NIB-Seal®
Country: US
Description: Ball Valve - Bronze, 250 PSI
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC.
Height: 2.090
Length: 6.430
Made to Order: Yes
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 5
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The 90-degree elbow features a solder cup and female NPT thread. The fitting provides a means of changing the pipeline direction by 90 degrees. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item Description
The 90-degree elbow features a solder cup and female NPT thread. The fitting provides a means of changing the pipeline direction by 90 degrees. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item Description
The light grey Corzan® CPVC socket coupling and reducing socket coupling feature female socket connections. Chemtrol® CPVC fittings are lightweight, easy to install and maintenance-free. Chemtrol® fittings connect piping lengths together with solvent cementing, threading or flanging to create a highly reliable, leak-free system. Please refer to Chemtrol technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Corzan® CPVC Schedule 80 thermoplastics demonstrate excellent mechanical strength over broad temperature range, outstanding underground performance and superior hydraulics. Chemtrol Corzan® CPVC fittings are lightweight, easy to install, maintenance-free and will not rust, scale, pit or corrode. Chemtrol® premium line of plastic fittings is backed by a 1-year limited warranty. Because Chemtrol® is a NIBCO brand the flow-control fittings are unsurpassed in quality, performance and longevity.
Item ID: 7070U4X
Width:
Height:
Finish: Light Grey
Extra Data: Do not use or test with compressed air or other gases, Female socket connections, Maximum service temperature 210°F, Universal Part No. 1829
Bullet5: ASTM F439
Bullet6: NSF/ANSI Standard 14
Bullet7: NSF/ANSI/CAN-61
Country: US
Description: Socket Coupling/Reducing Socket Coupling S x S - Corzan pecent CPVC Schedule 80
Disclaimer: Corzan pecent is a registered trademark of The Lubrizol Corporation.
Item Description
The ABS DWV P-Trap features a hub x slip joint connection with L.A. Pattern union joint that is used when local code does not permit the use of slip coupled traps. The P-Trap provides a water seal so that wastewater will automatically be trapped in the arc of the configuration, thereby preventing unwanted gases from entering the household environment. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707DUVV
Width:
Height:
Finish: Black
Extra Data: ASTM D2665, CSA B181.1, Do not test or use with compressed air or other gases, Service temperature -40°F to 180°F
Bullet5: ASTM D3965
Bullet6: ASTM D2661 and D3311
Bullet7: UL Listed 94V-0
Bullet8: NSF/ANSI Standard 14
Bullet9: NSF U.P. Certified
Country: US
Description: P-Trap with Union Joint L.A. Pattern Hub x SJ - ABS DWV
Disclaimer: Do not use or test with compressed air or other gasses.
Finish Family: Black
Height: 2.810
Length: 10.320
Low Lead: Yes
MadeInUSA: Yes
Material: Acrylonitrile Butadiene Styrene
Minimum Order Quantity: 35
Prop65: This product can expose you to Styrene, a chemical known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.
Item Description
The Isolator is a uni-flange ball valve that isolates a circulator pump, allowing virtually no air into the system during pump replacement or service. Its innovative design combines multiple components into a single forged brass body that saves time, labor and space. The Isolator has revolutionized the installation of circulator pumps and has evolved into the largest flanged ball valve program in the industry today, featuring patented technology with further patents pending. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079W6Z
Width:
Height:
Extra Data: Easily Isolates the Pump for Replacement, Flange Features a Conical Inlet to Minimize Turbulence, Prevents Electrolysis and Eliminates Galvanic Corrosion, Rotating Flange is Secured by a Snug-Fit Snap-Ring that Provides Greater Control Over Positioning During Installation
Bullet10: Ball valve with integral spring check saves labor, space, and leak paths
Bullet5: Multi-Function Drain Makes the Isolator the Only Valve That Drains From Either Side of the Pump
Bullet6: Fits Virtually Any Standard Circulator Pump
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The Isolator is a uni-flange ball valve that isolates a circulator pump, allowing virtually no air into the system during pump replacement or service. Its innovative design combines multiple components into a single forged brass body that saves time, labor and space. The Isolator has revolutionized the installation of circulator pumps and has evolved into the largest flanged ball valve program in the industry today, featuring patented technology with further patents pending. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079W6Y
Width:
Height:
Extra Data: Easily Isolates the Pump for Replacement, Flange Features a Conical Inlet to Minimize Turbulence, Prevents Electrolysis and Eliminates Galvanic Corrosion, Rotating Flange is Secured by a Snug-Fit Snap-Ring that Provides Greater Control Over Positioning During Installation
Bullet10: Ball valve with integral spring check saves labor, space, and leak paths
Bullet5: Multi-Function Drain Makes the Isolator the Only Valve That Drains From Either Side of the Pump
Bullet6: Fits Virtually Any Standard Circulator Pump
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The male adapter features a male solder end and male NPT thread. These fittings provide a means for adapting a solder connection to a threaded connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706UNVH
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Item Description
The 90-degree elbow features a solder cup and male NPT thread. The fitting provides a means of changing the pipeline direction 90 degrees, as well as adapting from a solder connection to a threaded connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item Description
The 90-degree elbow features a solder cup and male NPT thread. The fitting provides a means of changing the pipeline direction 90 degrees, as well as adapting from a solder connection to a threaded connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item Description
NIBCO engineers have redesigned the top works of the valve to make it easier to install and service. The stem is triple sealed with double O-rings and PTFE packing. The easily accessible, large pack nut can be tightened without removing the handle or using a special wrench. This also allows for the packing to be replaced and serviced. The handle is reversible without disconnecting the valve.585HP ball valve features press ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. When performance matters, choose the NIBCO® 585HP ball valves for the most advanced and versatile valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the industry leading NIBCO INC. 10-year 125% limited warranty.
Item ID: 70TX144
Width:
Height:
Extra Data: Copper-to-copper connections, Full port, Maximum service temperature 250°F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Silicon Performance Bronze® Body, Ball and Stem, Optional Stainless Steel Trim
Bullet5: Laser Welded
Bullet6: Reversible Handle
Bullet7: Easily Adjustable Pack Nut
Bullet8: Triple Sealed Stem
Bullet9: Blowout-proof Stem
Country: US
Description: NEEDS Z FAMILY CREATED BEFORE MARKETING FAMILY
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC.; Performance Bronze pecent is a registered trademark of NIBCO INC.
Height: 2.250
Length: 4.930
MadeInUSA: Yes
Material: Lead-Free Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO engineers have redesigned the top works of the valve to make it easier to install and service. The stem is triple sealed with double O-rings and PTFE packing. The easily accessible, large pack nut can be tightened without removing the handle or using a special wrench. This also allows for the packing to be replaced and serviced. The handle is reversible without disconnecting the valve.585HP ball valve features press ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. When performance matters, choose the NIBCO® 585HP ball valves for the most advanced and versatile valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the industry leading NIBCO INC. 10-year 125% limited warranty.
Item ID: 70TX217
Width:
Height:
Extra Data: Copper-to-copper connections, Full port, Maximum service temperature 250°F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Silicon Performance Bronze® Body, Ball and Stem, Optional Stainless Steel Trim
Bullet5: Laser Welded
Bullet6: Reversible Handle
Bullet7: Easily Adjustable Pack Nut
Bullet8: Triple Sealed Stem
Bullet9: Blowout-proof Stem
Country: US
Description: NEEDS Z FAMILY CREATED BEFORE MARKETING FAMILY
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC.; Performance Bronze pecent is a registered trademark of NIBCO INC.
Height: 1.840
Length: 6.420
Made to Order: Yes
MadeInUSA: Yes
Material: Lead-Free Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The ABS DWV 90-degree vent elbow features a hub x hub connection and the abrupt 90-degree angle is used to change the direction of flow in the venting side of the system. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707A037
Width:
Height:
Finish: Black
Extra Data: ASTM D2665, ASTM D3965, Do not test or use with compressed air or other gases, Service temperature -40°F to 180°F
Bullet5: ASTM D2661 and D3311
Bullet6: UL Listed 94V-0
Bullet7: NSF/ANSI Standard 14
Bullet8: NSF U.P. Certified
Country: US
Description: 90 degrees Vent Elbow H x H - ABS DWV
Finish Family: Black
Height: 3.950
Length: 5.360
Low Lead: Yes
MadeInUSA: Yes
Material: Acrylonitrile Butadiene Styrene
Minimum Order Quantity: 25
Prop65: This product can expose you to Styrene, a chemical known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR41W
Width:
Height:
Extra Data: 200 psi non-shock cold working pressure to 250°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
AltImageName1: /NBC/SPC1800.jpg
AltImageName2: /NBC/SPC1800.jpg
AltImagePath1: /NBC-SPC1800.JPEG
AltImagePath2: /NBC-SPC1800.JPEG
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Bullet7: Solder ends per ASME B16.22
Country: CN
Description: Union w/Test Port - Solder Body x Press Tailpiece
Length: 4.470
Made to Order: Yes
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR41V
Width:
Height:
Extra Data: 200 psi non-shock cold working pressure to 250°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
AltImageName1: /NBC/SPC1800.jpg
AltImageName2: /NBC/SPC1800.jpg
AltImagePath1: /NBC-SPC1800.JPEG
AltImagePath2: /NBC-SPC1800.JPEG
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Bullet7: Solder ends per ASME B16.22
Country: CN
Description: Union w/Test Port - Solder Body x Press Tailpiece
Length: 4.390
Made to Order: Yes
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Full port, Max temperature rating 300 Degrees F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Threaded end connections
Bullet5: Stainless steel ball and stem
Bullet6: Vented ball
Bullet7: Blowout-proof stem
Bullet8: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet9: NIBCO® HydraPure® lead-free markings on handle and body
Disclaimer: Performance Bronze is a registered trademark of NIBCO INC. NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 1.560
Length: 6.15
MadeInUSA: Yes
Material: Lead-Free Bronze
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Full port, Max temperature rating 300 Degrees F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Solder end connections
Bullet5: Stainless steel ball and stem
Bullet6: Vented ball
Bullet7: Blowout-proof stem
Bullet8: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet9: NIBCO® HydraPure® lead-free markings on handle and body
Disclaimer: Performance Bronze is a registered trademark of NIBCO INC. NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 1.560
Length: 6.28
MadeInUSA: Yes
Material: Lead-Free Bronze
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.