Item Description
Professional Classic Plus atmospheric gas water heaters are engineered for more hot water at a low operating cost.
Item ID: 80509K5
Width:
Height:
Extra Data: Exclusive air/fuel shut-off device, FHR: 52-105 gal, More hot water at a low operating cost, Recovery: 36.4-61 gph at a 90 deg F rise, depending on model
Family: Professional Classic Plus
Bullet10: Easy to light - no matches required
Bullet11: EverKleen patented system fights sediment build-up
Bullet12: Enhanced flow brass drain valve
Bullet13: Temperature and pressure relief valve included
Bullet14: Low lead compliant
Bullet15: Standard replacement parts
Bullet5: Maintenance free - no filter to clean
Bullet6: Protective control system that disables the heater in the presence of flammable vapor accumulation
Bullet7: Eco-friendly burner, low NOx design
Bullet8: Meets 40 ng/J NOx requirements
Bullet9: Premium grade anode rod provides long-lasting tank protection
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804XCTL
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053H4Y
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Extra Data: Digital LED display communicates system status and heater operation feedback, Low flow activation at 0.3 GPM, Self-diagnostics with intelligent controls actively protect heater in installed environment, Silent operation on all models except for RTEH012240MV
Bullet10: No T and P relief valve needed (check local codes), ready to go, right out-of-the-box
Bullet11: Save water and time by installing unit at the point-of-use
Bullet12: Control system activates heater only on demand
Bullet13: High temperature limit switch enables safe operation
Bullet14: Active energy management with power modulation allows for thermostatic accuracy
Bullet5: Mounts in any orientation for a flexible installation
Bullet6: Compact size fits almost anywhere; suitable for ADA compliant facilities
Bullet7: Only one input line, hot or cold, needed for an easy installation
Bullet8: Designed to deliver hot water to a single pipe faucet or mixing faucets
Bullet9: Integral 3/8'' compression fittings, no soldering or sweat connections required
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804XCVL
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Delivers 90 to 190 deg F water, Installs close to fixtures, eliminating the wait for hot water, Lifeguard heating elements - resist corrosion and burnout, separate screw-in type elements feature a stainless steel outer sheath of Incoloy 840, which surrounds the Nichrome wire filament, Long life ASME tank design - proprietary steel formulation with high temperature porcelain enamel maximizes corrosion-resistance
Bullet5: Immersion thermostat
Bullet6: Water connections - hot outlet and cold inlet are 3/4'' NPT plastic lined nipples which prevent excessive turbulence of heated water and results in optimum tank draw
Item Description
Professional Classic atmospheric gas water heaters are engineered for more hot water at a low operating cost.
Item ID: 8050CKE
Width:
Height:
Extra Data: Exclusive air/fuel shut-off device, Maintenance free - no filter to clean, More hot water at a low operating cost, Recovery: 30.3-40.4 gph at a 90 deg F rise, depending on model
Family: Professional Classic
Bullet10: Easy to light - no matches required
Bullet11: EverKleen patented system fights sediment build-up
Bullet12: Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
Bullet13: Enhanced flow brass drain valve
Bullet14: Factory installed temperature and pressure relief valve on select models
Bullet15: Low lead compliant
Bullet16: Standard replacement parts
Bullet5: Protective control system that disables the heater in the presence of flammable vapor accumulation
Bullet6: Eco-friendly burner, low NOx design
Bullet7: Meets 40 ng/J NOx requirements
Bullet8: Premium grade anode rod provides long-lasting tank protection
Bullet9: All models certified up to 5999'' above sea level, some certified up to 10000''
Item Description
Electric boosters are designed to fit under counters and deliver sanitizing rinse water for all stationary rack and conveyor type commercial dishwashers. Our 10 gal electric booster will raise preheated or cold water to 180 deg F rinse temperature for compliance with UL sanitation (NSF5) and all federal, state, county and local health department sanitation codes. In addition, these models can be used as circulating tank commercial electric water heaters for gravity or pump circulation to an auxiliary storage tank.
Item ID: 804XAWW
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Integral fusing - all models have integral fusing for each element, Long life heating elements - separate screw-in type elements feature a Nichrome wire filament, embedded in magnesium oxide sealed in a copper tube to resist water chemical corrosion, for long element life and a long life performance, elements are directly, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance resulting in a superior tank design, System sentinel - all electric booster models employ an element diagnostic panel, utilizing light emitting diodes (LED), corresponding to the number and location of each heating element. LED''s are energized when the electric elements are operating
Bullet10: All units are furnished with a fused 120 V control circuit, all controls (thermostats, high temperature limit, etc.) are operated off of this basic 120 V control circuit, this circuit is created by an internal multi-tap transformer of unique design that ha
Bullet5: Anode rods - (2) magnesium anodes are installed in each tank for maximum corrosion-resistance
Bullet6: AGA/ASME rated T and P valve - factory installed relief valve
Bullet7: Electrical connections - pre-wired, accessible control box with multiple knock-outs on side in size selections to match the National Electric Code, sizes range from 1/2''-2'', a grounding screw is provided for attaching an equipment groundi
Bullet8: Single panel control box - it comes with hinged stainless steel door that provides immediate access to all electrical components and elements
Bullet9: Terminal block - all models are equipped with UL listed terminal blocks for simplicity of installation, the terminal block will accept either copper or aluminum field connect wire
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053H4F
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Extra Data: Compact size fits almost anywhere; suitable for ADA compliant facilities, Low flow activation at 0.25 GPM (model dependent), Mounts in any orientation for a flexible installation, Only one cold water line needed for an easy installation
Bullet5: No T and P relief valve needed (check local codes), ready to go, right out-of-the-box
Bullet6: Save water and time by installing unit at the point-of-use
Bullet7: Integral 3/8'' compression fittings, no soldering or sweat connections required
Bullet8: Control system activates heater only on demand
Bullet9: High temperature limit switch enables safe operation
Extra Data: Our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence, The short heights and narrow jacket diameters, plus the top, front and rear water inlets/outlets offer the ultimate in installation flexibility, The tighter the commercial retrofit, the more you will appreciate how the universal''s compact size and multiple water connections simplify installations, choose from 80 percent thermal efficiency models that range from 98000-399900 Btu/hr and have, Universal''s proprietary steel formulation, patented multi-flue design, combined with two coats of porcelain enamel, results in a superior heat exchanger design
Family: Universal Low Nox
Bullet10: Anode design utilizes multiple magnesium rods to ensure corrosion-resistance for a long tank life
Bullet5: Precision burners, raised port design, are formed from high chromium stainless steel, each burner assembly slides out like a drawer for quick inspection and maintenance
Bullet6: Low profile damper minimizes overall product height, heavy-duty vent hood supports are designed to withstand the rigors of installation
Bullet7: Factory installed brass drain valve allows for faster draining and servicing
Bullet8: Energy saving ignition that ignites pilot only when there is a call for heat
Bullet9: Up to 5000'' for natural gas and 2000'' for LP with high altitude certification kit, up to 8000''
Item Description
PERFORMANCE direct vent gas water heaters are certified for manufactured housing (HUD) and modular construction.
Item ID: 8053J4Q
Width:
Height:
Extra Data: FHR: 60 gal for 40 gal model and 50 gal for 30 gal model, Fights sediment and mineral build-up, Recovery: 30.3 gph at a 90 deg F rise, Reduces fuel costs flexibility
Family: Performance
Bullet10: Piezo ignition easy light pilot
Bullet11: Factory installed temperature and pressure relief valve - side location
Bullet12: Low lead compliant
Bullet5: Field convertible controls for natural gas or LP operation included
Bullet6: No external door is required
Bullet7: Hot water outlet located at top
Bullet8: Cold water inlet at side for fast, economical hook-up
Bullet9: Premium grade anode rod provides long-lasting tank protection
Item Description
PERFORMANCE power vent gas water heaters offer up to 150'''' vent runs and the 50 and 40 gal models are Energy Star approved.
Item ID: 8053J34
Width:
Height:
Extra Data: Electronic gas control for improved monitoring and service, Energy Star rated, FHR: 66-86 gal, Recovery: up to 42.4 gph at a 90 deg F rise for 50 and 40 gal models, depending on model
Family: Performance
Bullet10: Maintenance free - no filter to clean
Bullet11: Disables the heater in the presence of flammable vapor accumulation
Bullet12: Patented anode rod provides long-lasting tank protection
Bullet13: Temperature and pressure relief valve included
Bullet14: Low lead compliant
Bullet15: Durable silicon nitride ignitor (HSI)
Bullet16: High ambient temperature service kit available for installations from 100-175 deg F
Bullet17: Standard replacement parts
Bullet5: Eco-friendly burner, low NOx design
Bullet6: Uses indoor air for combustion, blower exhausts the flue gases
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804XAWD
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Extra Data: Adjust water temperature track energy usage and set vacation mode all from your mobile device with built-in EcoNet Wi-Fi technology, ProTerra hybrid pulls heat from the air around it to heat water, reducing energy consumption, Uses up to 75 percent less energy than a standard electric water heater to help minimize your impact on the environment, View weekly, monthly and yearly energy usage reports from any mobile device to help better manage energy consumption
Family: Professional Prestige Proterra
Bullet10: With a zero clearance requirement, ProTerra hybrid fits in small spaces, even in closets
Bullet11: All serviceable parts and condensate line are on the front of the unit, making service easy
Bullet12: Self-cleaning reduces sediment buildup to prolong tank life and maintains the water heater''s efficiency and tank capacity
Bullet5: Diagnostic system control can be replaced without draining the water heater
Bullet6: Schedule set point adjustments and choose from 5 operating modes - energy saver, heat pump, electric, high demand, vacation - to fit your lifestyle
Bullet7: Quietest operation with a 49 dBA, operates just above a whisper so you won''t even notice it''s on
Bullet8: Enjoy plenty of hot water for the entire family with up to an 87 gal first hour delivery
Bullet9: Easy replacement with the same dimensions as a standard electric water heater
Extra Data: Available in 40, 50 and 55 gal capacities, Designed to protect your home, allow remote temperature control and alert you of potential issues, High-efficiency with 0.92-0.93 UEF, Smart water heater with built-in leak detection, auto water shutoff valve and Wi-Fi
Family: Performance Platinum Gladiator
Bullet10: Element health indicator shows exactly which element needs to be replaced and when
Bullet11: Enjoy built-in premium performance features normally sold separately
Bullet12: Brass drain valve allows the tank to drain faster for easy service
Bullet13: Perfect for replacement with same dimensions as a standard electric water heater with one-button startup
Bullet14: Temperature and pressure relief valve included
Bullet15: Self-cleaning fights sediment build-up to extend the tank life and maintains the efficiency and tank capacity
Bullet16: Enjoy enough hot water for the entire family with a 55 to 68 gal first hour delivery
Bullet17: High-efficiency solution saves money on energy bills with a 0.92-0.93 UEF
Bullet18: Dual 4500 or 5500 W stainless steel heating elements
Bullet5: LeakGuard auto water shut-off valve protects your home from potential water damage and limits leaks to no more than 20 oz of water
Bullet6: LeakSense built-in leak detection system detects any leak large or small, internal or external
Bullet7: Control temperature, set vacation or away mode, view energy usage and know immediately about leaks and service alerts from anywhere with built-in EcoNet Wi-Fi technology and the EcoNet app
Bullet8: Know you have enough hot water before you shower with the hot water availability indicator in the EcoNet app
Bullet9: Hands-free voice control with Alexa and Google Nest to easily adjust set temperature
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804XDT4
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Delivers 90 to 190 deg F water, Installs close to fixtures, eliminating the wait for hot water, Lifeguard heating elements - resist corrosion and burnout, separate screw-in type elements feature a stainless steel outer sheath of Incoloy 840, which surrounds the Nichrome wire filament, Long life ASME tank design - proprietary steel formulation with high temperature porcelain enamel maximizes corrosion-resistance
Bullet5: Immersion thermostat
Bullet6: Water connections - hot outlet and cold inlet are 3/4'' NPT plastic lined nipples which prevent excessive turbulence of heated water and results in optimum tank draw
Item Description
PERFORMANCE electric water heaters feature dual copper heating elements and a 6 years warranty.
Item ID: 8053J51
Width:
Height:
Extra Data: Electric junction box located above heating elements for easy installation, Over-temperature protector cuts off power in excess temperature situations, Premium grade anode rod provides long-lasting tank protection features
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site