Item Description
Eclipse non-metallic electric commercial water heaters are durable, lightweight, and offer an exclusive 10 years limited warranty.
Item ID: 804XDUM
Width:
Height:
Extra Data: High density polyethylene dent and scratch-resistant jacket, Input options: 12.4, 18 or 24 kW, Non-metallic, lightweight composite tank - no anode rod required, System Sentinel LED indicators are provided for each element to show when power is on
collection: Eclipse
Bullet5: Voltage options: 208, 240, or 480 VAC in either 1 ph or 3 ph (277 VAC in 1 ph only)
Bullet6: Element wattages: 3100, 4500 or 6000 in each of the 4 voltages
Bullet7: The elements are low watt density design (46, 67, 90 W/sq-in) with titanium sheath for superior protection
Bullet8: Power control circuits use two surface mounted thermostats and operate in two stages - lower control is for the lower two elements, which provides recovery for most needs, - upper control is for the upper two elements, which operates during high demands
Extra Data: Our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence, The short heights and narrow jacket diameters, plus the top, front and rear water inlets/outlets offer the ultimate in installation flexibility, The tighter the commercial retrofit, the more you will appreciate how the universal''s compact size and multiple water connections simplify installations, choose from 80 percent thermal efficiency models that range from 98000-399900 Btu/hr and have, Universal''s proprietary steel formulation, patented multi-flue design, combined with two coats of porcelain enamel, results in a superior heat exchanger design
collection: Universal Low Nox
Bullet10: Anode design utilizes multiple magnesium rods to ensure corrosion-resistance for a long tank life
Bullet5: Precision burners, raised port design, are formed from high chromium stainless steel, each burner assembly slides out like a drawer for quick inspection and maintenance
Bullet6: Low profile damper minimizes overall product height, heavy-duty vent hood supports are designed to withstand the rigors of installation
Bullet7: Factory installed brass drain valve allows for faster draining and servicing
Bullet8: Energy saving ignition that ignites pilot only when there is a call for heat
Bullet9: Up to 5000'' for natural gas and 2000'' for LP with high altitude certification kit, up to 8000''
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053F7A
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 80569YF
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Professional Classic direct vent gas water heaters use outside air for combustion, offer longer venting options and a coaxial vent for easy installation.
Item ID: 8053A8L
Width:
Height:
Extra Data: Adjustable coaxial vent allows flexibility of installation, can swivel 360 deg and uses outside air for combustion and requires no electrical power, Aluminum vent and cap base to prevent staining of building exterior, FHR: 78 gal for 50 gal model and 66 gal for 40 gal model, Recovery: 30.3-36.4 gph at a 90 deg F rise, depending on model
collection: Professional Classic
Bullet10: Premium grade anode rod provides long-lasting tank protection
Bullet11: Enhanced flow brass drain valve
Bullet12: Temperature and pressure relief valve included
Bullet13: Low lead compliant
Bullet14: Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
Bullet5: Longer venting options available, see chart on reverse
Bullet6: Exclusive air/fuel shut-off device
Bullet7: Maintenance free - no filter to clean
Bullet8: Disables the heater in the presence of flammable vapor accumulation
Item Description
Point-of-Use commercial electric line is designed to provide hot water at the consumption point, eliminating costly temperature loss in long piping runs.
Item ID: 805398N
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Automatic temperature control, Efficient design, Long life heating elements, Long life tank design
Extra Data: Exclusive Rheemglas tank lining resists corrosion, Gas master burner with precision port alignment for even heat transfer, Heat saving flue baffle design, R-foam insulation for superior heat retention
collection: Ferry
Bullet5: Model specific burners engineered for high MJ/H input
Bullet6: LP models feature durable stainless steel burners designed specifically for LP gas
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804XDU2
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Delivers 90 to 190 deg F water, Installs close to fixtures, eliminating the wait for hot water, Lifeguard heating elements - resist corrosion and burnout, separate screw-in type elements feature a stainless steel outer sheath of Incoloy 840, which surrounds the Nichrome wire filament, Long life ASME tank design - proprietary steel formulation with high temperature porcelain enamel maximizes corrosion-resistance
Bullet5: Immersion thermostat
Bullet6: Water connections - hot outlet and cold inlet are 3/4'' NPT plastic lined nipples which prevent excessive turbulence of heated water and results in optimum tank draw
Item Description
Point-of-Use commercial electric line is designed to provide hot water at the consumption point, eliminating costly temperature loss in long piping runs.
Item ID: 805398R
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Automatic temperature control, Efficient design, Long life heating elements, Long life tank design
Item Description
The PERFORMANCE atmospheric gas water heaters feature a diagnostic gas valve and a 6 years warranty.
Item ID: 80569YL
Width:
Height:
Extra Data: Eco-friendly burner, low NOx design, Meets 40 ng/J NOx requirements, Recovery: up to 51 gph at a 90 deg F rise, depending on model, Self-powered diagnostic gas control valve for improved monitoring and service
collection: Performance
Bullet10: Temperature and pressure relief valve included
Bullet11: Low lead compliant
Bullet12: Standard replacement parts
Bullet5: Exclusive air/fuel shut-off device
Bullet6: Maintenance free - no filter to clean
Bullet7: Disables the heater in the presence of flammable vapor accumulation
Bullet8: Premium grade anode rod provides long-lasting tank protection
Extra Data: Exclusive Rheemglas tank lining resists corrosion, Gas master burner with precision port alignment for even heat transfer, Heat saving flue baffle design, R-foam insulation for superior heat retention
collection: Ferry
Bullet5: Model specific burners engineered for high MJ/H input
Bullet6: LP models feature durable stainless steel burners designed specifically for LP gas
Extra Data: Our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence, The short heights and narrow jacket diameters, plus the top, front and rear water inlets/outlets offer the ultimate in installation flexibility, The tighter the commercial retrofit, the more you will appreciate how the universal''s compact size and multiple water connections simplify installations, choose from 80 percent thermal efficiency models that range from 98000-399900 Btu/hr and have, Universal''s proprietary steel formulation, patented multi-flue design, combined with two coats of porcelain enamel, results in a superior heat exchanger design
collection: Universal Low Nox
Bullet10: Anode design utilizes multiple magnesium rods to ensure corrosion-resistance for a long tank life
Bullet5: Precision burners, raised port design, are formed from high chromium stainless steel, each burner assembly slides out like a drawer for quick inspection and maintenance
Bullet6: Low profile damper minimizes overall product height, heavy-duty vent hood supports are designed to withstand the rigors of installation
Bullet7: Factory installed brass drain valve allows for faster draining and servicing
Bullet8: Energy saving ignition that ignites pilot only when there is a call for heat
Bullet9: Up to 5000'' for natural gas and 2000'' for LP with high altitude certification kit, up to 8000''
Item Description
Professional Achiever Point-of-Use electric water heaters feature a space-saving design for installation in limited spaces.
Item ID: 80538CV
Width:
Height:
Extra Data: Automatic thermostat keeps water at desired temperature, High-efficiency heating element, Over-temperature protector cuts off power in excess temperature situations, Wall bracket for easy wall mount installations and corrosion-resistant 1/4 turn drain valve included with 2.5 gal model
collection: Professional Achiever
Bullet10: Low lead compliant
Bullet5: Temperature and pressure relief valve
Bullet6: Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
Bullet7: Meets or exceeds National Appliance Energy Conservation Act (NAECA) requirements
Bullet8: These units are UL listed and comply with Underwriter''s Laboratories Specifications 174
Bullet9: Enhanced flow brass drain valve on 2.5 gal model
Item Description
Medium-duty gas commercial water heaters feature a compact design for greater installation flexibility in tight retrofit applications.
Item ID: 8053A8V
Width:
Height:
Extra Data: Magnesium anode rods are used to ensure corrosion-resistance for a long tank life, Proprietary steel formulation with a unique coat of high temperature porcelain enamel to maximize corrosion-resistance resulting in a superior tank design, The short heights and narrow jacket diameters, plus the top, front and rear water inlets/outlets offer the ultimate in installation flexibility, The tighter the commercial retrofit, the more you will appreciate how this water heater''s compact size simplifies installations
Bullet5: Rigid foam insulation provides superior insulating qualities, improves efficiency and reduces operating costs, our patented process of injecting foam into the insulating cavity adds additional durability
Bullet6: Control system is designed to shut-off gas if the pilot flame is extinguished, relighting is a safe, easy procedure, thermostat settings to 160 deg F, a built-in gas pressure regulator assures even gas flow
Bullet7: Factory installed relief valve
Bullet8: Factory installed brass drain valve allows for faster draining and servicing
Bullet9: Some models are certified for applications up to 8500'' above sea level
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site