Extra Data: Our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence, The short heights and narrow jacket diameters, plus the top, front and rear water inlets/outlets offer the ultimate in installation flexibility, The tighter the commercial retrofit, the more you will appreciate how the universal''s compact size and multiple water connections simplify installations, choose from 80 percent thermal efficiency models that range from 98000-399900 Btu/hr and have, Universal''s proprietary steel formulation, patented multi-flue design, combined with two coats of porcelain enamel, results in a superior heat exchanger design
collection: Universal
Bullet10: Anode design utilizes multiple magnesium rods to ensure corrosion-resistance for a long tank life
Bullet5: Precision burners, raised port design, are formed from high chromium stainless steel, each burner assembly slides out like a drawer for quick inspection and maintenance
Bullet6: Low profile damper minimizes overall product height, heavy-duty vent hood supports are designed to withstand the rigors of installation
Bullet7: Factory installed brass drain valve allows for faster draining and servicing
Bullet8: Energy saving ignition that ignites pilot only when there is a call for heat
Bullet9: Up to 5000'' for natural gas and 2000'' for LP with high altitude certification kit, up to 8000''
Item Description
The energy efficient PERFORMANCE PLATINUM powered damper gas water heaters meet or exceed the latest Energy Star requirements.
Item ID: 8053J3E
Width:
Height:
Extra Data: Electronic gas control for improved monitoring and service, Energy Star rated, FHR: 69-85 gal, Recovery rate is up to 40.4 gal at a 90 deg F rise, depending on model
collection: Performance Platinum
Bullet10: Exclusive air/fuel shut-off device
Bullet11: Maintenance free - no filter to clean
Bullet12: Disables the heater in the presence of flammable vapor accumulation
Bullet13: Fights sediment and mineral build-up
Bullet14: Reduces fuel costs
Bullet15: Premium grade anode rod provides long-lasting tank protection
Bullet16: Certified to 10200'' above sea level
Bullet17: Dual certified for both potable water and space heating
Bullet18: Durable brass drain valve
Bullet19: Temperature and pressure relief valve included
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053H47
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804X8Y8
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
PERFORMANCE electric water heaters feature dual copper heating elements and a 6 years warranty.
Item ID: 8053J2V
Width:
Height:
Extra Data: Electric junction box located above heating elements for easy installation, Over-temperature protector cuts off power in excess temperature situations, Premium grade anode rod provides long-lasting tank protection features
Extra Data: Our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence, The short heights and narrow jacket diameters, plus the top, front and rear water inlets/outlets offer the ultimate in installation flexibility, The tighter the commercial retrofit, the more you will appreciate how the universal''s compact size and multiple water connections simplify installations, choose from 80 percent thermal efficiency models that range from 98000-399900 Btu/hr and have, Universal''s proprietary steel formulation, patented multi-flue design, combined with two coats of porcelain enamel, results in a superior heat exchanger design
collection: Universal
Bullet10: Anode design utilizes multiple magnesium rods to ensure corrosion-resistance for a long tank life
Bullet5: Precision burners, raised port design, are formed from high chromium stainless steel, each burner assembly slides out like a drawer for quick inspection and maintenance
Bullet6: Low profile damper minimizes overall product height, heavy-duty vent hood supports are designed to withstand the rigors of installation
Bullet7: Factory installed brass drain valve allows for faster draining and servicing
Bullet8: Energy saving ignition that ignites pilot only when there is a call for heat
Bullet9: Up to 5000'' for natural gas and 2000'' for LP with high altitude certification kit, up to 8000''
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Bullet9: Two anode rods are installed to ensure long life and corrosion-resistance
Extra Data: 120 VAC powered blower, 2-pipe system: 1 pipe pulls in outside air for combustion and the other exhausts combustion gases, New whisper quiet blower
Item Description
Rheem Prestige RTGH is a series of high efficiency condensing tankless gas water heaters designed for continuous hot water.
Item ID: 8053E6Z
Width:
Height:
Extra Data: Exclusive! water savings setting upon activation, this setting can save homeowners up to 1100 gal of water per year by decreasing the flow of water through the pipes until the temperature reaches the heaters set temperature, Intelligent electronic controls designed to increase energy efficiency and safety, Low flow fixture compatible - industry first minimum flow rate of 0.26 gpm and minimum activation flow rate of 0.4 gpm ensures the user will receive hot water even in low demand situations, Up to 0.94 EF with stainless steel condensing heat exchanger
collection: Prestige
Bullet10: Digital display shows temperature setting and maintenance codes
Bullet11: 2-pipe direct vent system designed for PVC pipe (up to 38'' of 3'' PVC pipe or 5'' of 2'' PVC pipe)
Bullet12: Hot-start programming helps minimize fluctuation in water temperature, referred to as ''cold water sandwich'', during periods of frequent on/off operation
Bullet13: Exclusive! guardian OFW overheat film wrap
Bullet14: EZ-Link cable available for higher demand applications to connect two tankless units to operate as one
Bullet15: Manifold up to six units with an optional MIC-6 manifold control board
Bullet16: Manifold up to 20 units with the optional MIC-185 plus the MICS-180 manifold control assembly
Bullet17: High altitude capability - up to 8400'' elevation above sea level3
Bullet18: Digital remote control and 10'' of thermostat wire included
Bullet19: Supplied with a 120 V power cord (indoor models only)
Bullet20: Freeze protection to -30 deg F
Bullet21: EZ-Spec sizing software - advanced online tool that takes the guess work out of sizing tankless applications
Bullet5: Recirculation pump kit-ready - quickly pairs with our Recirculation pump kit to provide instantaneous hot water at the tap
Bullet6: Built-in condensate neutralizer
Bullet7: 1/2'' gas line compatibility on every model
Bullet8: Exclusive! maintenance notice setting alerts homeowner - flashing a warning code to call for service check
Bullet9: Self-diagnostic system for easy installation and service
Item Description
Electric boosters are designed to fit under counters and deliver sanitizing rinse water for all stationary rack and conveyor type commercial dishwashers. Our 10 gal electric booster will raise preheated or cold water to 180 deg F rinse temperature for compliance with UL sanitation (NSF5) and all federal, state, county and local health department sanitation codes. In addition, these models can be used as circulating tank commercial electric water heaters for gravity or pump circulation to an auxiliary storage tank.
Item ID: 804X8WY
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Integral fusing - all models have integral fusing for each element, Long life heating elements - separate screw-in type elements feature a Nichrome wire filament, embedded in magnesium oxide sealed in a copper tube to resist water chemical corrosion, for long element life and a long life performance, elements are directly, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance resulting in a superior tank design, System sentinel - all electric booster models employ an element diagnostic panel, utilizing light emitting diodes (LED), corresponding to the number and location of each heating element. LED''s are energized when the electric elements are operating
Bullet10: All units are furnished with a fused 120 V control circuit, all controls (thermostats, high temperature limit, etc.) are operated off of this basic 120 V control circuit, this circuit is created by an internal multi-tap transformer of unique design that ha
Bullet5: Anode rods - (2) magnesium anodes are installed in each tank for maximum corrosion-resistance
Bullet6: AGA/ASME rated T and P valve - factory installed relief valve
Bullet7: Electrical connections - pre-wired, accessible control box with multiple knock-outs on side in size selections to match the National Electric Code, sizes range from 1/2''-2'', a grounding screw is provided for attaching an equipment groundi
Bullet8: Single panel control box - it comes with hinged stainless steel door that provides immediate access to all electrical components and elements
Bullet9: Terminal block - all models are equipped with UL listed terminal blocks for simplicity of installation, the terminal block will accept either copper or aluminum field connect wire
Item Description
Professional Classic Plus ultra low NOx water heaters exceed ANSI standards for flammable vapor ignition-resistance.
Item ID: 8053E6E
Width:
Height:
Extra Data: Exclusive fuel shut-off device, FHR: 51-99 gal for natural gas, Maintenance free - no filter to clean, Recovery: up to 45 gph at a 90 deg F rise, depending on model
collection: Professional Classic Plus
Bullet10: Premium grade anode rod provides long-lasting tank protection
Bullet11: Easy to light - no matches required
Bullet12: Enhanced flow brass drain valve
Bullet13: Exclusive Rheemglas lining
Bullet14: All models certified to 10000'' above sea level
Bullet15: EverKleen patented system fights sediment build-up
Bullet5: Protective control system that disables the heater in the presence of flammable vapor accumulation
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Bullet9: Two anode rods are installed to ensure long life and corrosion-resistance
Item Description
Professional Classic Point-of-Use electric water heaters feature a space-saving design for installation in limited spaces.
Item ID: 80508MG
Width:
Height:
Extra Data: Automatic thermostat keeps water at desired temperature, High-efficiency heating element, Over-temperature protector cuts off power in excess temperature situations, Wall bracket for easy wall mount installations and corrosion-resistant 1/4 turn drain valve included with 2.5 gal model
collection: Professional Classic
Bullet5: Temperature and pressure relief valve
Bullet6: Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
Bullet7: Meets or exceeds National Appliance Energy Conservation Act (NAECA) requirements
Bullet8: These units are UL listed and comply with Underwriter''s Laboratories Specifications 174
Item Description
Introducing Rheem commercial condensing tankless water heaters - the most popular brand of tankless water heaters and the best option for commercial projects and applications. This ever-expanding commercial tankless line now includes 8 new units with 4 built-in manifold control ready options and common venting availability on all indoor models.
Item ID: 8053H2X
Width:
Height:
Finish: Gray Powder Coated
Extra Data: Exclusive hot-start programming, Hard water buildup warning, Overheat detection override, Service notification setting
Item Description
Hot water supply heaters are designed for applications that require high inputs and large volumes of stored hot water. Rheem hot water supply heaters are designed to provide hot water service to a variety of commercial applications when used in conjunction with an appropriately sized storage tank. Choose from 82 percent thermal efficiency models that range from 136000-1826000 Btu/h and have maximum temperature setting of 180 deg F. Applications include outdoor installation and for use with or without a circulating pump.
Item ID: 804X8VV
Width:
Height:
Extra Data: Compact design - the low water heater mass design offers substantial savings in weight and cube over most cast iron, steel tube and storage type water heaters making it ideal for rooftop installations and in tight quarters, Energy saving pump control - the energy saving pump control is an electric device that allows the operator to set the desired time for the pump to run after the water heater shuts off, Reliable heat exchanger design - the all copper heat exchanger is a single bank, straight-through design with a floating return header immune to thermal shock, Spark-to-pilot (IID)- this system is standard on all models for minimal heat loss
Bullet5: Glass lined cast iron headers - these headers handle any aggressive water conditions
Item Description
Professional Classic Point-of-Use electric water heaters feature a space-saving design for installation in limited spaces.
Item ID: 80508LZ
Width:
Height:
Extra Data: Automatic thermostat keeps water at desired temperature, High-efficiency heating element, Over-temperature protector cuts off power in excess temperature situations, Wall bracket for easy wall mount installations and corrosion-resistant 1/4 turn drain valve included with 2.5 gal model
collection: Professional Classic
Bullet5: Temperature and pressure relief valve
Bullet6: Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
Bullet7: Meets or exceeds National Appliance Energy Conservation Act (NAECA) requirements
Bullet8: These units are UL listed and comply with Underwriter''s Laboratories Specifications 174
Item Description
Introducing Rheem commercial condensing tankless water heaters - the most popular brand of tankless water heaters and the best option for commercial projects and applications. This ever-expanding commercial tankless line now includes 8 new units with 4 built-in manifold control ready options and common venting availability on all indoor models.
Item ID: 8053G69
Width:
Height:
Finish: Gray Powder Coated
Extra Data: Exclusive hot-start programming, Hard water buildup warning, Overheat detection override, Service notification setting
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site