Item Description
Professional Classic electric water heaters are engineered for longer life - resistored heating elements and premium grade anode rod.
Item ID: 8050FFQ
Width:
Height:
Extra Data: Automatic thermostat keeps water at desired temperature, Electric junction box located above heating elements for easy installation, EverKleen self-cleaning device fights harmful sediment build-up with a high-velocity spiraling water stream - helps operating efficiency by saving energy, money and improving tank life, Over-temperature protector cuts off power in excess temperature situations
Family: Professional Classic
Bullet5: Enhanced flow brass drain valve
Bullet6: Temperature and pressure relief valve included
Item Description
Professional Classic atmospheric gas water heaters are engineered for more hot water at a low operating cost.
Item ID: 8050DHA
Width:
Height:
Extra Data: Exclusive air/fuel shut-off device, Maintenance free - no filter to clean, More hot water at a low operating cost, Recovery: 30.3-40.4 gph at a 90 deg F rise, depending on model
Family: Professional Classic
Bullet10: Easy to light - no matches required
Bullet11: EverKleen patented system fights sediment build-up
Bullet12: Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
Bullet13: Enhanced flow brass drain valve
Bullet14: Factory installed temperature and pressure relief valve on select models
Bullet15: Low lead compliant
Bullet16: Standard replacement parts
Bullet5: Protective control system that disables the heater in the presence of flammable vapor accumulation
Bullet6: Eco-friendly burner, low NOx design
Bullet7: Meets 40 ng/J NOx requirements
Bullet8: Premium grade anode rod provides long-lasting tank protection
Bullet9: All models certified up to 5999'' above sea level, some certified up to 10000''
Extra Data: Brass drain valve, Collector feed and return fittings located at front of tank for convenient installation, Isolated tank design for better heat retention, Temperature and pressure relief valve included
Family: Solaraide He
Bullet10: Cold water inlet, hot water outlet, relief valve and anode rod at top of tank for easy access and fast, economical installation
Bullet11: Automatic temperature control
Bullet5: High-efficiency heating element
Bullet6: Rheemglas tank lining resists corrosion and prolongs tank life
Bullet7: Heat exchanger: copper tubing wrapped around and secured to the tank. Double wall, vented design for positive leak detection
Bullet8: Cold water inlet brings cold water to tank bottom to prevent mixing with heated water
Bullet9: Anode rod equalizes aggressive water action for prolonged tank life
Item Description
Point-of-Use commercial electric line is designed to provide hot water at the consumption point, eliminating costly temperature loss in long piping runs.
Item ID: 8053F4F
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Automatic temperature control, Efficient design, Long life heating elements, Long life tank design
Extra Data: Compact size fits almost anywhere; suitable for ADA compliant facilities, Low flow activation at 0.25 GPM (model dependent), Mounts in any orientation for a flexible installation, Only one cold water line needed for an easy installation
Bullet5: No T and P relief valve needed (check local codes), ready to go, right out-of-the-box
Bullet6: Save water and time by installing unit at the point-of-use
Bullet7: Integral 3/8'' compression fittings, no soldering or sweat connections required
Bullet8: Control system activates heater only on demand
Bullet9: High temperature limit switch enables safe operation
Item Description
Professional Achiever Point-of-Use electric water heaters feature a space-saving design for installation in limited spaces.
Item ID: 8050FG8
Width:
Height:
Extra Data: Automatic thermostat keeps water at desired temperature, High-efficiency heating element, Over-temperature protector cuts off power in excess temperature situations, Wall bracket for easy wall mount installations and corrosion-resistant 1/4 turn drain valve included with 2.5 gal model
Family: Professional Achiever
Bullet10: Low lead compliant
Bullet5: Temperature and pressure relief valve
Bullet6: Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
Bullet7: Meets or exceeds National Appliance Energy Conservation Act (NAECA) requirements
Bullet8: These units are UL listed and comply with Underwriter''s Laboratories Specifications 174
Bullet9: Enhanced flow brass drain valve on 2.5 gal model
Item Description
Table top water heaters are a good choice when installations are in kitchens or other work areas that require additional counter space.
Item ID: 804X51V
Width:
Height:
Extra Data: 4'' high back splash protects interior wall from spills and stains, Baked enamel counter top is acid and heat resistant, Channel at rear accommodates piping and permits water heater to fit snugly against back wall, Recessed base provides comfortable standing area while working
Bullet5: More hot water at a low operating cost
Bullet6: Durable direct immersion resistored heating element
Item Description
Professional Classic electric water heaters are engineered for longer life - resistored heating elements and premium grade anode rod.
Item ID: 8050FGQ
Width:
Height:
Extra Data: Automatic thermostat keeps water at desired temperature, Electric junction box located above heating elements for easy installation, EverKleen self-cleaning device fights harmful sediment build-up with a high-velocity spiraling water stream - helps operating efficiency by saving energy, money and improving tank life, Over-temperature protector cuts off power in excess temperature situations
Family: Professional Classic
Bullet5: Enhanced flow brass drain valve
Bullet6: Temperature and pressure relief valve included
Item Description
Professional Classic atmospheric gas water heaters are engineered for more hot water at a low operating cost.
Item ID: 8050CKF
Width:
Height:
Extra Data: Exclusive air/fuel shut-off device, Maintenance free - no filter to clean, More hot water at a low operating cost, Recovery: 30.3-40.4 gph at a 90 deg F rise, depending on model
Family: Professional Classic
Bullet10: Easy to light - no matches required
Bullet11: EverKleen patented system fights sediment build-up
Bullet12: Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
Bullet13: Enhanced flow brass drain valve
Bullet14: Factory installed temperature and pressure relief valve on select models
Bullet15: Low lead compliant
Bullet16: Standard replacement parts
Bullet5: Protective control system that disables the heater in the presence of flammable vapor accumulation
Bullet6: Eco-friendly burner, low NOx design
Bullet7: Meets 40 ng/J NOx requirements
Bullet8: Premium grade anode rod provides long-lasting tank protection
Bullet9: All models certified up to 5999'' above sea level, some certified up to 10000''
Item Description
Point-of-Use commercial electric line is designed to provide hot water at the consumption point, eliminating costly temperature loss in long piping runs.
Item ID: 8053E80
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Automatic temperature control, Efficient design, Long life heating elements, Long life tank design
Item Description
Hot water supply heaters are designed for applications that require high inputs and large volumes of stored hot water. Rheem hot water supply heaters are designed to provide hot water service to a variety of commercial applications when used in conjunction with an appropriately sized storage tank. Choose from 82 percent thermal efficiency models that range from 136000-1826000 Btu/h and have maximum temperature setting of 180 deg F. Applications include outdoor installation and for use with or without a circulating pump.
Item ID: 804X5YG
Width:
Height:
Extra Data: Compact design - the low water heater mass design offers substantial savings in weight and cube over most cast iron, steel tube and storage type water heaters making it ideal for rooftop installations and in tight quarters, Energy saving pump control - the energy saving pump control is an electric device that allows the operator to set the desired time for the pump to run after the water heater shuts off, Reliable heat exchanger design - the all copper heat exchanger is a single bank, straight-through design with a floating return header immune to thermal shock, Spark-to-pilot (IID)- this system is standard on all models for minimal heat loss
Bullet5: Glass lined cast iron headers - these headers handle any aggressive water conditions
Extra Data: Digital LED display communicates system status and heater operation feedback, Low flow activation at 0.3 GPM, Self-diagnostics with intelligent controls actively protect heater in installed environment, Silent operation on all models except for RTEH012240MV
Bullet10: No T and P relief valve needed (check local codes), ready to go, right out-of-the-box
Bullet11: Save water and time by installing unit at the point-of-use
Bullet12: Control system activates heater only on demand
Bullet13: High temperature limit switch enables safe operation
Bullet14: Active energy management with power modulation allows for thermostatic accuracy
Bullet5: Mounts in any orientation for a flexible installation
Bullet6: Compact size fits almost anywhere; suitable for ADA compliant facilities
Bullet7: Only one input line, hot or cold, needed for an easy installation
Bullet8: Designed to deliver hot water to a single pipe faucet or mixing faucets
Bullet9: Integral 3/8'' compression fittings, no soldering or sweat connections required
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 8050FH3
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
The PERFORMANCE atmospheric gas water heaters feature a diagnostic gas valve and a 6 years warranty.
Item ID: 8053J4G
Width:
Height:
Extra Data: Eco-friendly burner, low NOx design, Meets 40 ng/J NOx requirements, Recovery: up to 51 gph at a 90 deg F rise, depending on model, Self-powered diagnostic gas control valve for improved monitoring and service
Family: Performance
Bullet10: Temperature and pressure relief valve included
Bullet11: Low lead compliant
Bullet12: Standard replacement parts
Bullet5: Exclusive air/fuel shut-off device
Bullet6: Maintenance free - no filter to clean
Bullet7: Disables the heater in the presence of flammable vapor accumulation
Bullet8: Premium grade anode rod provides long-lasting tank protection
Item Description
Hot water supply heaters are designed for applications that require high inputs and large volumes of stored hot water. Rheem hot water supply heaters are designed to provide hot water service to a variety of commercial applications when used in conjunction with an appropriately sized storage tank. Choose from 82 percent thermal efficiency models that range from 136000-1826000 Btu/h and have maximum temperature setting of 180 deg F. Applications include indoor installation and for use with or without a circulating pump.
Item ID: 804X5Z1
Width:
Height:
Extra Data: Compact design - the low water heater mass design offers substantial savings in weight and cube over most cast iron, steel tube and storage type water heaters making it ideal for rooftop installations and in tight quarters, Energy saving pump control - the energy saving pump control is an electric device that allows the operator to set the desired time for the pump to run after the water heater shuts off, Reliable heat exchanger design - the all copper heat exchanger is a single bank, straight-through design with a floating return header immune to thermal shock, Spark-to-pilot (IID)- this system is standard on all models for minimal heat loss
Bullet5: Glass lined cast iron headers - these headers handle any aggressive water conditions
Item Description
Eclipse non-metallic electric commercial water heaters are durable, lightweight, and offer an exclusive 10 years limited warranty.
Item ID: 804XDUV
Width:
Height:
Extra Data: High density polyethylene dent and scratch-resistant jacket, Input options: 12.4, 18 or 24 kW, Non-metallic, lightweight composite tank - no anode rod required, System Sentinel LED indicators are provided for each element to show when power is on
Family: Eclipse
Bullet5: Voltage options: 208, 240, or 480 VAC in either 1 ph or 3 ph (277 VAC in 1 ph only)
Bullet6: Element wattages: 3100, 4500 or 6000 in each of the 4 voltages
Bullet7: The elements are low watt density design (46, 67, 90 W/sq-in) with titanium sheath for superior protection
Bullet8: Power control circuits use two surface mounted thermostats and operate in two stages - lower control is for the lower two elements, which provides recovery for most needs, - upper control is for the upper two elements, which operates during high demands
Extra Data: Compact size fits almost anywhere; suitable for ADA compliant facilities, Digital LED display with accessible user interface communicates system status and heater operation feedback, Mounts in any orientation for a flexible installation, Silent operation on all models except for RTEH012240T
Bullet10: Control system activates heater only on demand
Bullet11: High temperature limit switch enables safe operation
Bullet12: Active energy management with power modulation allows for thermostatic accuracy
Bullet5: Only one input line, hot or cold, needed for an easy installation
Bullet6: Designed to deliver hot water to a single pipe faucet, mixing valves or mixing faucets
Bullet7: Integral 3/8'' compression fittings, no soldering or sweat connections required
Bullet8: No T and P relief valve needed (check local codes), ready to go, right out-of-the-box
Bullet9: Save water and time by installing unit at the point-of-use
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 8050FHL
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site