Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053F4R
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053C79
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
Rheem RTG is a series of ultra low NOx, mid-efficiency tankless gas water heaters designed for continuous hot water.
Item ID: 8053A94
Width:
Height:
Extra Data: EcoNet enabled - all tankless products from 2010 to present can connect to EcoNet mobile app via tankless EcoNet accessory kit (REWRA630TWH), Exclusive! water savings setting - upon activation, this setting can save homeowners up to 1100 gal of water per year by reducing flow at the tap until set temperature is achieved (optional), Industry best! low flow activation - minimum flow rate of o.26 gpm and minimum activation flow rate of 0.4 gpm ensures the user will receive hot water even in low demand situations, Recirculation pump kit - ready providing faster hot water at the tap and savings of up to 12000 gal water/year
Bullet5: Digital remote control and 10'' of thermostat wire included
Bullet6: Requires 120 V power supply (indoor models only)
Bullet7: Industry best! freeze protection to -30 deg F
Bullet8: Maximum water temperature is 140 deg F, for higher temperature applications, upgrade kits are available
Item Description
Table top water heaters are a good choice when installations are in kitchens or other work areas that require additional counter space.
Item ID: 804X51N
Width:
Height:
Extra Data: 4'' high back splash protects interior wall from spills and stains, Baked enamel counter top is acid and heat resistant, Channel at rear accommodates piping and permits water heater to fit snugly against back wall, Recessed base provides comfortable standing area while working
Bullet5: More hot water at a low operating cost
Bullet6: Durable direct immersion resistored heating element
Extra Data: Exclusive Rheemglas tank lining resists corrosion, Gas master burner with precision port alignment for even heat transfer, Heat saving flue baffle design, R-foam insulation for superior heat retention
collection: Ferry
Bullet5: Model specific burners engineered for high MJ/H input
Bullet6: LP models feature durable stainless steel burners designed specifically for LP gas
Item Description
Electric boosters are designed to fit under counters and deliver sanitizing rinse water for all stationary rack and conveyor type commercial dishwashers. Our 10 gal electric booster will raise preheated or cold water to 180 deg F rinse temperature for compliance with UL sanitation (NSF5) and all federal, state, county and local health department sanitation codes. In addition, these models can be used as circulating tank commercial electric water heaters for gravity or pump circulation to an auxiliary storage tank.
Item ID: 804XEUD
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Integral fusing - all models have integral fusing for each element, Long life heating elements - separate screw-in type elements feature a Nichrome wire filament, embedded in magnesium oxide sealed in a copper tube to resist water chemical corrosion, for long element life and a long life performance, elements are directly, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance resulting in a superior tank design, System sentinel - all electric booster models employ an element diagnostic panel, utilizing light emitting diodes (LED), corresponding to the number and location of each heating element. LED''s are energized when the electric elements are operating
Bullet10: All units are furnished with a fused 120 V control circuit, all controls (thermostats, high temperature limit, etc.) are operated off of this basic 120 V control circuit, this circuit is created by an internal multi-tap transformer of unique design that ha
Bullet5: Anode rods - (2) magnesium anodes are installed in each tank for maximum corrosion-resistance
Bullet6: AGA/ASME rated T and P valve - factory installed relief valve
Bullet7: Electrical connections - pre-wired, accessible control box with multiple knock-outs on side in size selections to match the National Electric Code, sizes range from 1/2''-2'', a grounding screw is provided for attaching an equipment groundi
Bullet8: Single panel control box - it comes with hinged stainless steel door that provides immediate access to all electrical components and elements
Bullet9: Terminal block - all models are equipped with UL listed terminal blocks for simplicity of installation, the terminal block will accept either copper or aluminum field connect wire
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Point-of-Use commercial electric line is designed to provide hot water at the consumption point, eliminating costly temperature loss in long piping runs.
Item ID: 804X515
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Automatic temperature control, Efficient design, Long life heating elements, Long life tank design
Item Description
Professional Classic Plus atmospheric gas water heaters are engineered for more hot water at a low operating cost.
Item ID: 8053A9K
Width:
Height:
Extra Data: Exclusive air/fuel shut-off device, FHR: 52-105 gal, More hot water at a low operating cost, Recovery: 36.4-61 gph at a 90 deg F rise, depending on model
collection: Professional Classic Plus
Bullet10: Easy to light - no matches required
Bullet11: EverKleen patented system fights sediment build-up
Bullet12: Enhanced flow brass drain valve
Bullet13: Temperature and pressure relief valve included
Bullet14: Low lead compliant
Bullet15: Standard replacement parts
Bullet5: Maintenance free - no filter to clean
Bullet6: Protective control system that disables the heater in the presence of flammable vapor accumulation
Bullet7: Eco-friendly burner, low NOx design
Bullet8: Meets 40 ng/J NOx requirements
Bullet9: Premium grade anode rod provides long-lasting tank protection
Item Description
Heavy-duty electric commercial water heaters are available in 50 through 175 gal capacities. All models quick ship from Rheem warehouses no deposit required.
Item ID: 804XETW
Width:
Height:
Extra Data: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 15 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet5: Choose 3, 6, 9 or 12 element models for your specific application
Bullet6: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet7: Long life tank design: proprietary steel formulation with high temperature porcelain enamel to maximize corrosion-resistance resulting in a superior tank design
Bullet8: Two anode rods are installed to ensure long life and corrosion-resistance
Item Description
Point-of-Use commercial electric line is designed to provide hot water at the consumption point, eliminating costly temperature loss in long piping runs.
Item ID: 8053F54
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Automatic temperature control, Efficient design, Long life heating elements, Long life tank design
Item Description
Professional Classic ultra low NOx gas water heaters are SCAQMD rule 1121 compliant with 10 ng/J NOx emissions.
Item ID: 8053A9X
Width:
Height:
Extra Data: Exclusive fuel shut-off device for double protection, FHR: 51-86 gal for natural gas, Maintenance free - no filter to clean, Recovery: 30-40 gph at 90 deg F rise, depending on model
collection: Professional Classic
Bullet10: EverKleen patented system fights sediment build-up
Bullet11: Reduces fuel costs
Bullet12: Provides more hot water
Bullet13: No matches required Longer Life
Bullet14: Enhanced flow brass drain valve
Bullet15: Temperature and pressure relief valve included
Bullet5: Protective control system that disables the heater in the presence of flammable vapor accumulation
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Bullet9: Two anode rods are installed to ensure long life and corrosion-resistance
Item Description
Table top water heaters are a good choice when installations are in kitchens or other work areas that require additional counter space.
Item ID: 804X50N
Width:
Height:
Extra Data: 4'' high back splash protects interior wall from spills and stains, Baked enamel counter top is acid and heat resistant, Channel at rear accommodates piping and permits water heater to fit snugly against back wall, Recessed base provides comfortable standing area while working
Bullet5: More hot water at a low operating cost
Bullet6: Durable direct immersion resistored heating element
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053F5K
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Extra Data: Our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence, The short heights and narrow jacket diameters, plus the top, front and rear water inlets/outlets offer the ultimate in installation flexibility, The tighter the commercial retrofit, the more you will appreciate how the universal''s compact size and multiple water connections simplify installations, choose from 80 percent thermal efficiency models that range from 98000-399900 Btu/hr and have, Universal''s proprietary steel formulation, patented multi-flue design, combined with two coats of porcelain enamel, results in a superior heat exchanger design
collection: Universal
Bullet10: Anode design utilizes multiple magnesium rods to ensure corrosion-resistance for a long tank life
Bullet5: Precision burners, raised port design, are formed from high chromium stainless steel, each burner assembly slides out like a drawer for quick inspection and maintenance
Bullet6: Low profile damper minimizes overall product height, heavy-duty vent hood supports are designed to withstand the rigors of installation
Bullet7: Factory installed brass drain valve allows for faster draining and servicing
Bullet8: Energy saving ignition that ignites pilot only when there is a call for heat
Bullet9: Up to 5000'' for natural gas and 2000'' for LP with high altitude certification kit, up to 8000''
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 8053G5G
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Point-of-Use commercial electric line is designed to provide hot water at the consumption point, eliminating costly temperature loss in long piping runs.
Item ID: 804X505
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Automatic temperature control, Efficient design, Long life heating elements, Long life tank design
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 8053G4H
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Extra Data: Our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence, The short heights and narrow jacket diameters, plus the top, front and rear water inlets/outlets offer the ultimate in installation flexibility, The tighter the commercial retrofit, the more you will appreciate how the universal''s compact size and multiple water connections simplify installations, choose from 80 percent thermal efficiency models that range from 98000-399900 Btu/hr and have, Universal''s proprietary steel formulation, patented multi-flue design, combined with two coats of porcelain enamel, results in a superior heat exchanger design
collection: Universal
Bullet10: Anode design utilizes multiple magnesium rods to ensure corrosion-resistance for a long tank life
Bullet5: Precision burners, raised port design, are formed from high chromium stainless steel, each burner assembly slides out like a drawer for quick inspection and maintenance
Bullet6: Low profile damper minimizes overall product height, heavy-duty vent hood supports are designed to withstand the rigors of installation
Bullet7: Factory installed brass drain valve allows for faster draining and servicing
Bullet8: Energy saving ignition that ignites pilot only when there is a call for heat
Bullet9: Up to 5000'' for natural gas and 2000'' for LP with high altitude certification kit, up to 8000''
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site