Extra Data: Compatible with any combination of 1/2-in copper, PEX, CPVC, or PE-RT pipes, Factory set to regulate flow to a safe 45 PSI, adjustable from 10 to 70 PSI, Integrated internal by-pass mechanism, Solid lead-free bronze construction
Bullet5: Cartridge based design allows for quick and easy service
Bullet6: Designed for use where inlet pressure does not exceed 200 PSI
Description: The SharkBite pressure-regulating valve is designed to reduce incoming water pressure to a safe pressure to protect plumbing components. They also help to prevent pressure surges from entering the household from the main line. High pressure can cause damag
Extra Data: 3/4-in SharkBite x 3/4-in FIP x 18-in, Corrugated stainless steel, Rated to 200 PSI and 180 degrees Fahrenheit, Use to connect water heater to any combination of PEX, copper, CPVC or PE-RT
Bullet5: Push-to-connect fittings require no solder, glue, unions, or tools
Bullet6: Approved by ASME A112.18.6-2009/CSA B125.6-200 and NSF 372
Description: The 3/4-in SharkBite x 3/4-in FIP x 18-in SharkBite corrugated stainless steel water heater connector allows you to easily connect your hot and cold water supply lines to your water heater. After applying pipe thread tape to the FIP nipples on your water h
Extra Data: Approved for NSF/ANSI 70, ASTM F877-2011a and CSA B137.5-2009, Made in USA, Minimum working temperature 33 degrees F at 160 psi, Strong, flexible, corrosion/freeze-resistant pipe designed for hot or cold plumbing applications
Bullet5: Maximum working temperature 200 degrees F at 80 psi
Bullet6: Maximum working pressure is 160 PSI at 33 degrees F - 70 degrees F (see spec sheet for more detail)
Description: SharkBite reclaimed water PEX is cross-linked polyethylene tubing for gray water, rainwater harvesting and reclaimed water systems only. Manufactured with a purple color background, the tubing meets color code requirements of national and state code bodies
Extra Data: Connects, copper, PEX, or CPVC in any combination, Designed for vertical and horizontal installation, Eliminates the need for additional transition fittings, Instant push-fit connections for increased ease-of-use
Bullet5: 3/4'' Push-Connect
Bullet6: Meets the Mandatory 2014 U.S. Safe Drinking Water Act For Low Lead Content
Description: The SharkBite water heater connectors are used in residential and commercial applications to connect the hot and cold supply lines to the water heater. The connectors are EPDM knitted with braided stainless steel. The connectors are available in 12 in., 15
Extra Data: Compatible with copper, CPVC, PEX, PE-RT and HDPE pipes, Lead free DZR brass, No tools, soldering, clamps, unions or glue needed, Rated to 200 degrees F and 200 PSI
Bullet5: Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
Bullet6: Meets all UPC, IPC and cUPC requirements
Description: SharkBite large diameter fittings are available in 1-1/4-in, 1-1/2-in and 2-in sizes. These fittings are compatible with copper, CPVC, PEX, PE-RT, and HDPE pipe in any combination. Just insert the pipe, and stainless steel teeth bite down and grip tight, w
Extra Data: Fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination, Fittings certified to 200 PSI and 200 degrees F (93 degrees C), Instant push-fit connection for increased ease-of-use, No soldering, clamps, unions, or glue required
Bullet5: Design certified and agency listed
Bullet6: Approved to be used underground and behind walls without access panels
Description: SharkBite is the push-fit connection system thats really taking hold. It''s the easiest way to join copper, CPVC or PEX pipe in any combination - with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite dow
Extra Data: Fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination, Fittings certified to 200 PSI and 200 degrees F (93 degrees C), Instant push-fit connection for increased ease-of-use, No soldering, clamps, unions, or glue required
Bullet5: Not A Water Heater Supply Line
Bullet6: 1/2'' x 1/2''
Description: SharkBite is the push-fit connection system thats really taking hold. It''s the easiest way to join copper, CPVC or PEX pipe in any combination - with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite dow
Extra Data: Approved for NSF/ANSI 70, ASTM F877-2011a and CSA B137.5-2009, Made in USA, Minimum working temperature 33 degrees F at 160 psi, Strong, flexible, corrosion/freeze-resistant pipe designed for hot or cold plumbing applications
Bullet5: Maximum working temperature 200 degrees F at 80 psi
Bullet6: Maximum working pressure is 160 PSI at 33 degrees F - 70 degrees F (see spec sheet for more detail)
Description: SharkBite reclaimed water PEX is cross-linked polyethylene tubing for gray water, rainwater harvesting and reclaimed water systems only. Manufactured with a purple color background, the tubing meets color code requirements of national and state code bodies
Extra Data: Certified to 200 PSI and 200 degrees F, Fits copper, CPVC and PEX tubing, No soldering, clamps, unions or glue required., Use to connect to smaller pipe sizes.
Bullet5: Certified for underground applications and as a manufactured joint without access panels
Bullet6: Meets UPC, IPC and Canadian plumbing code requirements.
Description: The SharkBite connection system is a revolutionary solution for connecting or repairing water distribution pipe. SharkBite push-fit fittings are the fastest, easiest way to join copper, CTS CPVC and PEX pipe in any combination.
Extra Data: All-in-one gauge, For use with 1/2 In., 3/4 In., and 1 In. tubing, Gauge measures proper installation depth, Removes burrs from pipe to ensure complete seal
Bullet5: Ease of use tool
Bullet6: Compact, robust DZR brass body
Description: The SharkBite push-fit fittings are the fastest, easiest way to join copper, CPVC, or PEX tubing in any combination. Each fitting increases ease of use while decreasing the time and effort needed to connect water distribution pipe. There is no glue, solder
Extra Data: 3/4-in push-to-connect x 3/4-in push-to-connect stop valve with drain/vent, Innovative push-to-connect design makes for quick and easy installation, Multi-turn valve for on/off flow control, Push-to-connect inlet compatible with PEX, copper, CPVC or PE-RT
Bullet5: Push-to-connect fittings require no solder, glue, unions, or tools
Bullet6: Fitting can be rotated on pipe after installation making it easier to work in tight spaces
Description: The SharkBite 3/4-in push-to-connect x 3/4-in push-to-connect stop valve with drain/vent are compatible with any combination of copper, PEX, CPVC or PE-RT pipes and require no solder, glue, unions or additional tools to connect. This multi turn valve allow
Extra Data: Compatible with any combination of 1/2-in copper, PEX, CPVC, or PE-RT pipes, Factory set to regulate flow to a safe 45 PSI, adjustable from 10 to 70 PSI, Integrated internal by-pass mechanism, Solid lead-free bronze construction
Bullet5: Cartridge based design allows for quick and easy service
Bullet6: Designed for use where inlet pressure does not exceed 200 PSI
Description: The SharkBite pressure-regulating valve is designed to reduce incoming water pressure to a safe pressure to protect plumbing components. They also help to prevent pressure surges from entering the household from the main line. High pressure can cause damag
Extra Data: Certified to 200 PSI and 200 degrees F, Fits copper, CPVC and PEX tubing, No soldering, clamps, unions or glue required, No soldering, clamps, unions or glue required.
Bullet5: Certified for underground applications and as a manufactured joint without access panels
Bullet6: Meets UPC, IPC and Canadian plumbing code requirements.
Description: The SharkBite connection system is a revolutionary solution for connecting or repairing water distribution pipe. SharkBite push-fit fittings are the fastest, easiest way to join copper, CTS CPVC and PEX pipe in any combination.
Extra Data: Compatible with any combination of 3/4-in copper, CPVC, or PE-RT pipes, Factory set to regulate flow to a safe 45 PSI, adjustable from 10 to 70 PSI, Integrated internal by-pass mechanism, Solid lead-free bronze construction
Bullet5: Cartridge based design allows for quick and easy service
Bullet6: Designed for use where inlet pressure does not exceed 200 PSI
Description: The SharkBite pressure-regulating valve is designed to reduce incoming water pressure to a safe pressure to protect plumbing components. They also help to prevent pressure surges from entering the household from the main line. High pressure can cause damag
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site