Item Description
Pressing tools, jaws and chain sets are an integral part of ensuring a reliable, permanent connection between copper piping and NIBCO Press System® fittings and valves. Use only pressing tools, jaws and chain sets that have been tested and approved for use with NIBCO Press System® fittings and valves. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains.
Item ID: 70HXZK5
Width:
Height:
Extra Data: For use with PC-280 or PC-20M press tools
AltImageName1: /NBC/PC-9L.jpg
AltImageName2: /NBC/PC-9L.jpg
AltImagePath1: /NBC-PC-9L.JPEG
AltImagePath2: /NBC-PC-9L.JPEG
Country: Germany
Description: The NIBCO Press System AC adapter is intended for use with the PC-280 press tool or the PC-20M mini press tool. The AC adapter is a handy accessory to keep the power going on the job. Batteries and battery rechargers are also available.
Disclaimer: NIBCO Press System pecent is a registered trademark of NIBCO INC.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFX5D
Width:
Height:
Extra Data: Conventional port, Max temperature rating 300°F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Dezincification resistant
Bullet11: Lead-free*
Bullet12: Patent Pending: 3" size
Bullet13: Conforms to MSS SP-110
Bullet14: IAPMO IGC-157
Bullet15: NSF/ANSI/CAN-61
Bullet16: NSF/ANSI/CAN-372
Bullet5: Stainless steel ball and stem
Bullet6: Blowout-proof stem
Bullet7: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet8: NIBCO® HydraPure® lead-free* markings on handle and body
Bullet9: Threaded end connections
Country: USA
Description: The NIBCO ball valve is made of lead-free* Silicon Performance Bronze alloy and has achieved the stringent NSF/ANSI 61 section 8 (Commercial Hot) and NSF/ANSI 372 listings. The two-piece valve provides bubble-tight shutoff at 600 PSI and is dezincification
Height: 2.950
Length: 8.840
Low Lead: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8VQZ
Width:
Height:
Extra Data: Conventional port, Max temperature rating 300°F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Dezincification resistant
Bullet11: Lead-free*
Bullet12: Patent Pending: 3" size
Bullet13: Conforms to MSS SP-110
Bullet14: IAPMO IGC-157
Bullet15: NSF/ANSI/CAN-61
Bullet16: NSF/ANSI/CAN-372
Bullet5: Stainless steel ball and stem
Bullet6: Blowout-proof stem
Bullet7: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet8: NIBCO® HydraPure® lead-free* markings on handle and body
Bullet9: Solder end connections
Country: USA
Description: The NIBCO ball valve is made of lead-free* Silicon Performance Bronze alloy and has achieved the stringent NSF/ANSI 61 section 8 (Commercial Hot) and NSF/ANSI 372 listings. The two-piece valve provides bubble-tight shutoff at 600 PSI and is dezincification
Height: 2.950
Length: 9.440
Low Lead: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFT7K
Width:
Height:
Extra Data: Full port, Max temperature rating 300°F, Silicon Performance Bronze® body, ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Lead-free*
Bullet11: Conforms to MSS SP-110
Bullet12: NSF/ANSI/CAN-61
Bullet13: NSF/ANSI/CAN-372
Bullet14: IAPMO/ANSI Z1157
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet7: NIBCO® HydraPure® lead-free* markings on handle and body
Bullet8: Threaded end connections
Bullet9: Dezincification resistant
Country: USA
Description: The NIBCO ball valve is made of lead-free* Silicon Performance Bronze alloy and has achieved the stringent NSF/ANSI 61/CAN section 8 (Commercial Hot) and NSF/ANSI 372/CAN listings. The two-piece valve provides bubble-tight shutoff at 600 PSI and is dezinci
Height: 3.540
Length: 9.160
Low Lead: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8RU8
Width:
Height:
Extra Data: Full port, Max temperature rating 300°F, Silicon Performance Bronze® body, ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Lead-free*
Bullet11: Conforms to MSS SP-110
Bullet12: NSF/ANSI/CAN-61
Bullet13: NSF/ANSI/CAN-372
Bullet14: IAPMO/ANSI Z1157
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet7: NIBCO® HydraPure® lead-free* markings on handle and body
Bullet8: Solder end connections
Bullet9: Dezincification resistant
Country: USA
Description: The NIBCO ball valve is made of lead-free* Silicon Performance Bronze alloy and has achieved the stringent NSF/ANSI/CAN 61 section 8 (Commercial Hot) and NSF/ANSI/CAN 372 listings. The two-piece valve provides bubble-tight shutoff at 600 PSI and is dezinci
Height: 3.540
Length: 9.740
Low Lead: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Easily Isolates the Pump for Replacement, Flange Features a Conical Inlet to Minimize Turbulence, Prevents Electrolysis and Eliminates Galvanic Corrosion, Rotating Flange is Secured by a Snug-Fit Snap-Ring that Provides Greater Control Over Positioning During Installation
Bullet10: Eliminates Leak Paths
Bullet5: Optional Multi-Function Drain Makes the Isolator the Only Valve That Drains From Either Side of the Pump
Bullet6: Fits Virtually Any Standard Circulator Pump
Bullet7: Permanent Leak-Free Connections Made in Seconds and Compatible With All PP-R and PP-RCT Piping Systems
Bullet8: Saves Time
Bullet9: Replaces Components
Country: China
Height: 4.100
Length: 5.7
Low Lead: Yes
Material: Brass
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Coil-Connect® Kit NCC1P is prepackaged to include a TPC-1810 thread x press manual balancing valve, PCT-1830 press x thread isolation ball valve with drain, and a T-1800 union with PT port installed. Flexible braided stainless steel hoses are optional and are available in 3 standard lengths. Please refer to NIBCO technical data sheets and IOM Manuals for engineering and installation information. Whether a system is designed for heating, cooling or water distribution, it must be properly adjusted and balanced for optimum performance. A balanced system ensures a comfortable indoor climate. Choose NIBCO FLO-BOSS Coil-Connect Kits and accessories for the most versatile and economical option in commercial HVAC and mechanical system applications. NIBCO FLO-BOSS Coil-Connect components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707H3DK
Width:
Height:
Extra Data: Individually packaged and labeled, Kit can be marked and tagged per contractor requirements, Packaged in recyclable heavy duty poly bags, Use in U.S. drinking water applications is prohibited after January 3, 2014
AltImageName1: /NBC/NCC1P.jpg
AltImageName2: /NBC/NCC1P.jpg
AltImagePath1: /NBC-NCC1P.JPEG
AltImagePath2: /NBC-NCC1P.JPEG
Country: USA
Description: The NIBCO FLO-BOSS Coil-Connect Kits provide a simplified group of products for ease of installation and maintenance. All items required for coil control exist in one convenient package. Multiple size and product options offer greater sizing and installati
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site