Extra Data: Copper-to-copper connections, Full port, Maximum service temperature 250 Degrees F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Dezincification resistant
Bullet5: Blowout-proof stem
Bullet6: Reinforced PTFE seat rings
Bullet7: Press x press female end connections
Bullet8: Press leak-detection feature
Bullet9: Multiple handle options, including NIB-Seal®
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC. Performance Bronze pecent is a registered trademark of NIBCO INC.
Height: 1.200
Length: 5.93
MadeInUSA: Yes
Material: Lead-Free Bronze
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Blowout-proof stem, Full port, NIBCO® HydraPure® lead-free markings on handle and body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: NSF/ANSI/CAN-61
Bullet5: Standard lever handle; other handle options available
Bullet6: Dezincification resistant
Bullet7: Lead-free
Bullet8: Conforms to MSS SP-110
Bullet9: NSF/ANSI/CAN-372
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineer
Height: 2.620
Length: 4.62
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Blowout-proof stem, Full port, Threaded end connections, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: NSF/ANSI/CAN-372
Bullet5: Standard lever handle; other handle options available
Bullet6: NIBCO® HydraPure® lead-free markings on handle and body
Bullet7: Dezincification resistant
Bullet8: Lead-free
Bullet9: Conforms to MSS SP-110
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engine
Height: 2.620
Length: 4.62
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® Press System is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. The lead free ball valve is specifically designed for use in systems that deliver water for human consumption. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO® Press System features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707KZ7J
Width:
Height:
Extra Data: Copper-to-copper connections, FIP x press female end connections, Maximum service temperature 250°F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Dezincification resistant
Bullet11: Lead-free*
Bullet12: Conforms to MSS SP-145
Bullet13: NSF/ANSI/CAN-61 and 372
Bullet14: Not intended for gas use
Bullet15: IAPMO/ANSI Z1157 (IGC 157)
Bullet5: Full port
Bullet6: Blowout-proof stem
Bullet7: Reinforced PTFE seat rings
Bullet8: Multiple handle options
Bullet9: Press leak-detection feature
Country: China
Description: The NIBCO Press System ball valve body is manufactured from lead free* Brass alloy and is dezincification resistant (DZR). The ball valve is designed with a FIP x press-to-connect end connections and is an ideal valve for the transition of connection types
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC.
Height: 1.240
Length: 4.750
Material: Lead-Free Brass
Minimum Order Quantity: 10.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site