Item Description
The Isolator is a uni-flange ball valve that isolates a circulator pump, allowing virtually no air into the system during pump replacement or service. Its innovative design combines multiple components into a single forged brass body that saves time, labor and space. The Isolator has revolutionized the installation of circulator pumps and has evolved into the largest flanged ball valve program in the industry today, featuring patented technology with further patents pending. Enjoy all of the labor saving advantages of Webstone with over-molded connections for heat fusion. Designed for use with in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076RK6
Width:
Height:
Extra Data: Easily Isolates the Pump for Replacement, Flange Features a Conical Inlet to Minimize Turbulence, Prevents Electrolysis and Eliminates Galvanic Corrosion, Rotating Flange is Secured by a Snug-Fit Snap-Ring that Provides Greater Control Over Positioning During Installation
Bullet10: Eliminates Leak Paths
Bullet11: Ball valve with integral spring check saves labor, space, and leak paths
Bullet12: Adjustable Packing Gland
Bullet13: Available in Lead-Free
Bullet14: Available in SWT, PRS
Bullet15: Available in PP-RCT SKT x FLG
Bullet16: Certified to NSF/ANSI 61
Bullet5: Optional Multi-Function Drain Makes the Isolator the Only Valve That Drains From Either Side of the Pump
Bullet6: Fits Virtually Any Standard Circulator Pump
Bullet7: Permanent Leak-Free Connections Made in Seconds and Compatible With All PP-R and PP-RCT Piping Systems
Bullet8: Saves Time
Bullet9: Replaces Components
Country: China
Description: Isolator w/ Rotating Flange, Full Port Forged Brass Uni-Flange Ball Valve, w/ Detachable Rotating Flange, Adjustable Packing Glands, Nuts and Bolts, Fits Standard and High Velocity Pumps. (for use with PP-RCT Piping Systems)
Height: 4.100
Length: 5.700
Low Lead: Yes
Material: Brass
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The cast iron check valve features flanged end connections for easy installation. The swing check valve includes a renewable rubber disc and bronze seat ring. Swing checks may be installed in horizontal positions (or vertical with flow moving up). The check valve is recommended for automatic fire sprinkler systems and is UL/ULC listed and FM approved. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves, for the most specified, versatile and economical valve option in commercial, mechanical, fire protection and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L608
Width:
Height:
Extra Data: 175 psi/12.1 bar non-shock water working pressure (WWP), Bolted bonnet, Class 125 flanged end connections, Iron body, bronze mounted trim (IBBM)
AltImageName1: /NBC/F908W.jpg
AltImageName2: /NBC/F908W.jpg
AltImagePath1: /NBC-F908W.JPEG
AltImagePath2: /NBC-F908W.JPEG
Bullet10: Listed by Underwriters Laboratories of U.S. and Canada (UL/ULC)
Bullet11: FM Approved
Bullet12: Approved by New York City BSA 143-69-SA
Bullet5: Renewable seat and disc
Bullet6: All sizes tapped 3/4" at location "C" for ball drip assembly
Bullet7: Flanged end connections
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet9: Conforms to MSS SP-71
Country: USA
Description: The NIBCO flanged cast iron horizontal swing check valve is designed with renewable seat and disc. Swing check valves prevent backflow by automatically closing when fluid reverses direction. This valve is generally installed between the Siamese connections
Height: 9.500
Length: 13.000
MadeInUSA: Yes
Material: Cast Iron
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® Iron Isolation Balancing Y-strainer helps filter particulte to protect piping systems. The Y-strainer includes multiple tapped ports for PT points, air vents and acessories . An integral Stainless Steel perforated screen is also provided. Strainer is designed to allow servicing of the screen without having to remove the strainer from the line, a blow-down plug is also included for screen maintenance. The strainers designed with flanged end connections for easy installation. A Geared Butterfly Valve with Aluminum Bronze Disc and Stainless Steel Stem is included to provide isolation. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® strainers are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HUXX4
Width:
Height:
Extra Data: 150 psi non-shock -20°F to 150°F (Sizes 14" & 16"), 200 psi non-shock -20°F to 150°F (Sizes 2"-12"), Maximum temperature 250°F at 125 psi (Sizes 14" & 16"), Maximum temperature 250°F at 175 psi (Sizes 2"-12")
Bullet5: Pressure temperature port
Bullet6: Perforated stainless steel screen
Bullet7: Tapped cap with plug
Bullet8: ANSI Class 125 flanges
Bullet9: ANSI Class 125 flanges
Country: China
Description: The NIBCO Iron Isolation Balancing Y-strainer helps filter particulte to protect piping systems. The Y-strainer includes multiple tapped ports for PT points, air vents and acessories . An integral Stainless Steel perforated screen is also provided. Straine
Height: 11.100
Length: 24.100
Material: Cast Iron
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO Press System pecent is user friendly, quick and easy to install. The pressing tool assures a consistent, reliable, safe and clean connection with no flame, solder or flux. The lightweight, ergonomically designed press tool features a pressing head that smoothly rotates 350 degrees making it ideal for working in tight spaces. As a safety feature, an interruptible crimp cycle will instantly stop the forward motion of the rollers when the trigger is released. A manual retract switch allows the user to return the rollers to the starting position in case of error or emergency. When properly crimped, a unique ''N'' witness mark is clearly visible. Pressing tools, jaws and chain sets are an integral part of ensuring a reliable, permanent connection between copper piping and NIBCO Press System pecent fittings and valves. Use only pressing tools, jaws and chain sets that have been tested and approved for use with NIBCO Press System pecent fittings and valves. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System pecent applies the proven performance of press technology to NIBCO valves and fittings ? the most specified flow control products in the industry. The NIBCO Press System pecent features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains.
Item ID: 70HXZK9
Width:
Height:
Extra Data: Batteries and charger, Creates leak-free connections, Heavy-duty carrying case, Mini Press Tool
AltImageName1: /NBC/PC-200M.jpg
AltImageName2: /NBC/PC-200M.jpg
AltImagePath1: /NBC-PC-200M.JPEG
AltImagePath2: /NBC-PC-200M.JPEG
Bullet5: No flame, solder or flux
Bullet6: Comes with 3 jaws (1/2'', 3/4'', 1)
Country: Germany
Description: Mini Press Tool Kit with Jaws
Disclaimer: NIBCO Press System pecent is a registered trademark of NIBCO INC.
Item Description
The NIBCO® Iron Isolation Balancing Y-strainer helps filter particulte to protect piping systems. The Y-strainer includes multiple tapped ports for PT points, air vents and acessories . An integral Stainless Steel perforated screen is also provided. Strainer is designed to allow servicing of the screen without having to remove the strainer from the line, a blow-down plug is also included for screen maintenance. The strainers designed with flanged end connections for easy installation. A Geared Butterfly Valve with Aluminum Bronze Disc and Stainless Steel Stem is included to provide isolation. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® strainers are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HUXXY
Width:
Height:
Extra Data: 150 psi non-shock -20°F to 150°F (Sizes 14" & 16"), 200 psi non-shock -20°F to 150°F (Sizes 2"-12"), Maximum temperature 250°F at 125 psi (Sizes 14" & 16"), Maximum temperature 250°F at 175 psi (Sizes 2"-12")
Bullet5: Pressure temperature port
Bullet6: Perforated stainless steel screen
Bullet7: Tapped cap with plug
Bullet8: ANSI Class 125 flanges
Bullet9: ANSI Class 125 flanges
Country: USA
Description: The NIBCO Iron Isolation Balancing Y-strainer helps filter particulte to protect piping systems. The Y-strainer includes multiple tapped ports for PT points, air vents and acessories . An integral Stainless Steel perforated screen is also provided. Straine
Height: 10.000
Length: 30.510
Material: Cast Iron
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron check valve features flanged end connections for easy installation. It is equipped with a bolted bonnet for maintenance accessibility. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L623
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, All iron trim, Bolted bonnet
Bullet5: Renewable seat and disc
Bullet6: Class 125 flanged end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-71 Type 1
Country: USA
Description: The NIBCO Class 125 flanged cast iron horizontal swing check valve is designed with renewable iron seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. The flanged cast iron check valve may be used
Height: 9.000
Length: 11.500
Made to Order: MTO
MadeInUSA: Yes
Material: Cast Iron
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The tee features solder cups. The fitting allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XMM0
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
AltImageName1: /NBC/611.jpg
AltImageName2: /NBC/611.jpg
AltImagePath1: /NBC-611.JPEG
AltImagePath2: /NBC-611.JPEG
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: Material, workmanship and dimensions per MSS SP-109 (5" to 8")
Bullet8: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Bullet9: UL 207 Recognized to 700 PSI (select diameters)
Country: USA
Description: The NIBCO lead-free* wrot copper solder pressure tee used in residential and commercial systems such as potable water, air conditioning and refrigeration. Options also include cleaned and bagged for oxygen service (medical gas).
Item Description
The NIBCO® Iron Isolation Balancing Y-strainer helps filter particulte to protect piping systems. The Y-strainer includes multiple tapped ports for PT points, air vents and acessories . An integral Stainless Steel perforated screen is also provided. Strainer is designed to allow servicing of the screen without having to remove the strainer from the line, a blow-down plug is also included for screen maintenance. The strainers designed with flanged end connections for easy installation. A Geared Butterfly Valve with Aluminum Bronze Disc and Stainless Steel Stem is included to provide isolation. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® strainers are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HUXXR
Width:
Height:
Extra Data: 150 psi non-shock -20°F to 150°F (Sizes 14" & 16"), 200 psi non-shock -20°F to 150°F (Sizes 2"-12"), Maximum temperature 250°F at 125 psi (Sizes 14" & 16"), Maximum temperature 250°F at 175 psi (Sizes 2"-12")
Bullet5: Pressure temperature port
Bullet6: Perforated stainless steel screen
Bullet7: Tapped cap with plug
Bullet8: ANSI Class 125 flanges
Bullet9: ANSI Class 125 flanges
Country: USA
Description: The NIBCO Iron Isolation Balancing Y-strainer helps filter particulte to protect piping systems. The Y-strainer includes multiple tapped ports for PT points, air vents and acessories . An integral Stainless Steel perforated screen is also provided. Straine
Height: 12.640
Length: 23.090
Material: Cast Iron
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze check valve features threaded end connections for ease of installation. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCXFJ
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 366°F/185°C, 300 psi/20.7 bar non-shock cold working pressure, Renewable PTFE disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 150 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-80
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. It features a screw-in bonnet for accessibility to repair or
Height: 4.690
Length: 9.280
Made to Order: MTO
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze check valve features threaded end connections for ease of installation. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCXFV
Width:
Height:
Extra Data: 200 psi/13.8 bar saturated steam to 391°F/201°C, 400 psi/27.6 bar non-shock cold working pressure, Renewable bronze disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 200 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-80
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. It features a screw-in bonnet for accessibility to repair or
Height: 4.780
Length: 9.250
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze check valve features solder end connections for ease of installation. Swing check valves may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8QVP
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 366°F/185°C, 300 psi/20.7 bar non-shock cold working pressure, Renewable bronze disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 150 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-80
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. It features a screw-in bonnet for accessibility to repair or
Height: 4.780
Length: 9.590
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site