Item Description
The fitting reducer features a male solder end and solder cup. The fitting provides a means for reducing the size of a line. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706UKYX
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
AltImageName1: /NBC/600-2.jpg
AltImageName2: /NBC/600-2.jpg
AltImagePath1: /NBC-600-2.JPEG
AltImagePath2: /NBC-600-2.JPEG
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: Material, workmanship and dimensions per MSS SP-109 (5" to 8")
Bullet8: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Bullet9: UL 207 Recognized to 700 PSI (select diameters)
Country: USA
Description: The NIBCO lead-free* wrot copper solder pressure fitting reducer is used in residential and commercial systems such as potable water, air conditioning and refrigeration. Options also include cleaned and bagged for oxygen service (medical gas).
Item Description
SLBV Lined Ball Valves ISO 5211 mounting flange allows direct mounting of actuators, eliminating costly automation hardware. Separate lined ball and stem allows the ball to float, preventing side loading which creates stem leaks. Standard take out dimensions allows the Series 100 valve to replace any standard ball, plug or gate valve. Additional metal-to-metal body joint prevents possible leakage from temperature changes or line stresses - damage to the seal cannot be caused by over tightening. Valve can be used in service ranging from full vacuum up to 250 psi Utilizes interference between the ball and the seats, which under low-pressure, results in a tight shut-off. Lockable hand lever comes standard, allowing user to lock valve in open or closed position. All Sure Seal LBV Series 100 Ball Valves conform to the following specifications: ASME B16.5, ASME B16.10, ASME B16.42, ISO 5211, and MSS-SP25.
Item ID: 70J45TW
Width:
Height:
Extra Data: Flanged style PFA lined body, Seats: PTFE, Two-piece PFA lined ball and stem, Valve pressure rating full vacuum to 250 psi
Country: USA
Description: SLBV Lined Ball Valves Standard take out dimensions allows the Series 100 valve to replace any standard ball, plug or gate valve.
Height: 5.820
Length: 9.010
Made to Order: MTO
MadeInUSA: Yes
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron sliding disc check valve is wafer style to fit between standard flanges. Wafer checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HN3D6
Width:
Height:
Extra Data: Class 125 is rated 200 psi/13.8 bar non-shock cold working pressure, Max temperature 200°F/ 93°C, Spring actuated (1/2 psi cracking pressure), Stainless steel trim
AltImageName1: /NBC/W910.jpg
AltImageName2: /NBC/W910.jpg
AltImagePath1: /NBC-W910.JPEG
AltImagePath2: /NBC-W910.JPEG
Bullet5: Class 125 wafer end connections
Bullet6: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet7: Conforms to MSS SP-125
Bullet8: FM Approved
Country: USA
Description: The NIBCO wafer style silent check valve is spring actuated with renewable bronze seat and disc. The spring return reduces noise for quiet operation. Check valves prevent backflow by automatically closing when fluid reverses direction. The check valve is r
Height: 4.000
Length: 7.000
MadeInUSA: Yes
Material: Cast Iron
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The cast iron check valve features flanged end connections for easy installation. The swing check valve includes a renewable rubber disc and bronze seat ring. Swing checks may be installed in horizontal positions (or vertical with flow moving up). The check valve is recommended for automatic fire sprinkler systems and is UL/ULC listed and FM approved. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves, for the most specified, versatile and economical valve option in commercial, mechanical, fire protection and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L60A
Width:
Height:
Extra Data: 175 psi/12.1 bar non-shock water working pressure (WWP), Bolted bonnet, Class 125 flanged end connections, Iron body, bronze mounted trim (IBBM)
AltImageName1: /NBC/F908W.jpg
AltImageName2: /NBC/F908W.jpg
AltImagePath1: /NBC-F908W.JPEG
AltImagePath2: /NBC-F908W.JPEG
Bullet10: Listed by Underwriters Laboratories of U.S. and Canada (UL/ULC)
Bullet11: FM Approved
Bullet12: Approved by New York City BSA 143-69-SA
Bullet5: Renewable seat and disc
Bullet6: All sizes tapped 3/4" at location "C" for ball drip assembly
Bullet7: Flanged end connections
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet9: Conforms to MSS SP-71
Country: USA
Description: The NIBCO flanged cast iron horizontal swing check valve is designed with renewable seat and disc. Swing check valves prevent backflow by automatically closing when fluid reverses direction. This valve is generally installed between the Siamese connections
Height: 11.750
Length: 16.380
MadeInUSA: Yes
Material: Cast Iron
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron check valve features threaded end connections for easy installation. It is equipped with a bolted bonnet for maintenance accessibility. The swing check valve includes a renewable cast bronze seat and disc. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJRY0
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Bolted bonnet, Bronze mounted trim
Bullet5: Renewable seat and disc
Bullet6: Class 125 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-71 Type 1
Country: USA
Description: The NIBCO class 125 flanged cast iron horizontal swing check valve is designed with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. The check valve is recommended for commercial and i
Height: 7.380
Length: 8.460
Made to Order: MTO
MadeInUSA: Yes
Material: Cast Iron
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron check valve features flanged end connections for easy installation. It is equipped with a bolted bonnet for maintenance accessibility. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8LY0
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, All iron trim, Bolted bonnet
Bullet5: Renewable seat and disc
Bullet6: Class 125 flanged end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-71 Type 1
Country: USA
Description: The NIBCO Class 125 flanged cast iron horizontal swing check valve is designed with renewable iron seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. The flanged cast iron check valve may be used
Height: 7.000
Length: 8.500
Made to Order: MTO
MadeInUSA: Yes
Material: Cast Iron
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The Chemtrol calibrated needle valve is designed for fine regulation of liquid flow. The valve''''s injection molded PVC construction with FKM O-ring is ideal for use in instrumentation and laboratory work.
Item ID: 707GWJP
Width:
Height:
Finish: Dark Grey
Extra Data: FKM O-ring, Maximum service temperature 140 Degrees F, Threaded end connections, Valve pressure rating 150 psi at 73 Degrees F water non-shock
Bullet5: Calibrated handle
Bullet6: Do not use or test with compressed air or other gases
Item Description
The NIBCO® cast iron check valve features flanged end connections for easy installation. It is equipped with a bolted bonnet for maintenance accessibility. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L62P
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Bolted bonnet, Bronze mounted trim
AltImageName1: /NBC/F918B.jpg
AltImageName2: /NBC/F918B.jpg
AltImagePath1: /NBC-F918B.JPEG
AltImagePath2: /NBC-F918B.JPEG
Bullet5: Renewable seat and disc
Bullet6: Class 125 flanged end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-71 Type 1
Country: USA
Description: The NIBCO cast iron horizontal swing check valve is designed with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. The check valve is recommended for commercial and industrial steam, w
Height: 9.000
Length: 11.500
MadeInUSA: Yes
Material: Cast Iron
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron sliding disc check valve is wafer style to fit between standard flanges. Wafer checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HN3D7
Width:
Height:
Extra Data: Class 125 is rated 200 psi/13.8 bar non-shock cold working pressure, Max temperature 200°F/ 93°C, Spring actuated (1/2 psi cracking pressure), Stainless steel trim
AltImageName1: /NBC/W910.jpg
AltImageName2: /NBC/W910.jpg
AltImagePath1: /NBC-W910.JPEG
AltImagePath2: /NBC-W910.JPEG
Bullet5: Class 125 wafer end connections
Bullet6: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet7: Conforms to MSS SP-125
Bullet8: FM Approved
Country: USA
Description: The NIBCO wafer style silent check valve is spring actuated with renewable bronze seat and disc. The spring return reduces noise for quiet operation. Check valves prevent backflow by automatically closing when fluid reverses direction. The check valve is r
Height: 4.750
Length: 8.750
Made to Order: MTO
MadeInUSA: Yes
Material: Cast Iron
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron check valve features flanged end connections for easy installation. It is equipped with a bolted bonnet for maintenance accessibility. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8LY1
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, All iron trim, Bolted bonnet
Bullet5: Renewable seat and disc
Bullet6: Class 125 flanged end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-71 Type 1
Country: USA
Description: The NIBCO Class 125 flanged cast iron horizontal swing check valve is designed with renewable iron seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. The flanged cast iron check valve may be used
Height: 7.500
Length: 9.500
Made to Order: MTO
MadeInUSA: Yes
Material: Cast Iron
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron check valve features flanged end connections for easy installation. It is equipped with a bolted bonnet for maintenance accessibility. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8LXU
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Bolted bonnet, Bronze mounted trim
AltImageName1: /NBC/F918B.jpg
AltImageName2: /NBC/F918B.jpg
AltImagePath1: /NBC-F918B.JPEG
AltImagePath2: /NBC-F918B.JPEG
Bullet5: Renewable seat and disc
Bullet6: Class 125 flanged end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-71 Type 1
Country: USA
Description: The NIBCO cast iron horizontal swing check valve is designed with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. The check valve is recommended for commercial and industrial steam, w
Height: 9.000
Length: 11.500
MadeInUSA: Yes
Material: Cast Iron
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
SLBV Lined Ball Valves ISO 5211 mounting flange allows direct mounting of actuators, eliminating costly automation hardware. Separate lined ball and stem allows the ball to float, preventing side loading which creates stem leaks. Standard take out dimensions allows the Series 100 valve to replace any standard ball, plug or gate valve. Additional metal-to-metal body joint prevents possible leakage from temperature changes or line stresses - damage to the seal cannot be caused by over tightening. Valve can be used in service ranging from full vacuum up to 250 psi Utilizes interference between the ball and the seats, which under low-pressure, results in a tight shut-off. Lockable hand lever comes standard, allowing user to lock valve in open or closed position. All Sure Seal LBV Series 100 Ball Valves conform to the following specifications: ASME B16.5, ASME B16.10, ASME B16.42, ISO 5211, and MSS-SP25.
Item ID: 70J45TX
Width:
Height:
Extra Data: Flanged style PFA lined body, Seats: PTFE, Two-piece PFA lined ball and stem, Valve pressure rating full vacuum to 250 psi
Country: USA
Description: SLBV Lined Ball Valves Standard take out dimensions allows the Series 100 valve to replace any standard ball, plug or gate valve.
Height: 5.820
Length: 12.250
Made to Order: MTO
MadeInUSA: Yes
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site