Item Description
Webstone offers a wide array of products designed to support efficient opperations. Designed for use with water, oil, glycol mix in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079U8E
Width:
Height:
Extra Data: High Powered 12000 Gauss Magnet Captures Ferrous Debris and Filters Iron Sludge Before it Can Damage the Boiler or Pump, Large Filter Body Increases Time Between Service, Protects System Components and Maintains System Efficiency, Universal Diverter Allows Use in Any Piping Orientation
Bullet5: Protective Sleeve Prevents Sludge from Accumulating Directly on the Magnet. Remove the Magnet and the Debris Falls into the Cavity Below.
Bullet6: Includes Service Tool
Bullet7: Models available to satisfy all state and federal low-lead laws
Country: China
Description: Magnetic Boiler Filter, 12,000 Gauss Magnet, Diverter, Integrated Hose Drain Valve, Air Vent and Filter, Includes (2) Union End Connections and Service Tool
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Max temperature rating 300°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Country: US
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engine
MadeInUSA: Yes
Prop65: WARNING: This product can expose you to chemicals including lead, which is
known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO® FLO-BOSS® Combination Strainer Valves are constructed of dezincification resistant materials that provide a completely integrated balancing solution. Each valve is complete with an integral ball valve with PTFE seat, strainer, drain, union connection, one PT Port and EDPM O-rings. Additional threaded tappings are available for optional accessories. Please refer to NIBCO technical data sheets and IOM Manuals for engineering and installation information. Choose NIBCO® Coil-Connect® Kits, valves, fittings and accessories for the most specified, versatile and economical option in commercial HVAC and mechanical applications. NIBCO Coil-Connect components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR336
Width:
Height:
Extra Data: 200 psi non-shock cold working pressure to 250°F, DZR Brass body and tail pieces, Maximum temperature rating 250°F at 200 psi, Strainer Filter – Stainless Steel
AltImageName1: /NBC/PCT1820.jpg
AltImageName2: /NBC/PCT1820.jpg
AltImagePath1: /NBC-PCT1820.JPEG
AltImagePath2: /NBC-PCT1820.JPEG
Bullet5: Threaded x Press Ends
Bullet6: PTFE seats
Bullet7: EPDM O-Rings
Bullet8: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet9: FLO-BOSS® S
Country: USA
Description: NIBCO FLO-BOSS Combination Strainer Valves provide a completely integrated balancing solution. Each valve is complete with an integral ball valve, strainer, drain, union connection and one PT Port. Additional threaded tappings are available for optional ac
Made to Order: MTO
MadeInUSA: Yes
Material: Brass
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Copper-to-copper connections, Full port, Maximum service temperature 250 Degrees F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Multiple handle options, including NIB-Seal®
Bullet5: Stainless steel trim
Bullet6: Blowout-proof stem
Bullet7: Reinforced PTFE seat rings
Bullet8: Press x press female end connections
Bullet9: Press leak-detection feature
Country: USA
Description: The NIBCO Press System is user friendly, quick and easy to install. When properly crimped a unique ''N'' witness mark is clearly visible. The lead free HydraPure Performance Bronze ball valve is specifically designed for use in systems that
Height: 2.250
Length: 5.61
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO® FLO-BOSS® Automatic Balancing Valves are constructed with dezincification resistant materials. This unique valve design provides finite control through a wide range of flow cartridges. Please refer to NIBCO technical data sheets and IOM Manuals for engineering and installation information. Whether a system is designed for heating, cooling or water distribution, it must be properly adjusted and balanced for optimum performance. A balanced system ensures a comfortable indoor climate. Choose NIBCO® Coil-Connect® valves, fittings and accessories for the most specified, versatile and economical option in commercial HVAC and mechanical applications. NIBCO® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCVHD
Width:
Height:
Extra Data: 300 psi non-shock cold working pressure, DZR Brass body and tail pieces, Maximum temperature rating 260°F at 150 psi, Regulating cartridge DZR Brass and Stainless Steel
Bullet5: EPDM O-rings
Bullet6: NPT Threaded Ends
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: FLO-BOSS® A
Country: Italy
Description: NIBCO FLO-BOSS Automatic Balancing Valves are ideally suited for use in HVAC and other mechanical applications that require a balanced system providing optimum flow. Each valve has 2 integral drilled and tapped ports with PT ports installed, has double uni
Height: 2.010
Length: 4.720
Material: Brass
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO® FLO-BOSS® Automatic Balancing Valves are constructed with dezincification resistant materials. This unique valve design provides finite control through a wide range of flow cartridges. Please refer to NIBCO technical data sheets and IOM Manuals for engineering and installation information. Whether a system is designed for heating, cooling or water distribution, it must be properly adjusted and balanced for optimum performance. A balanced system ensures a comfortable indoor climate. Choose NIBCO® Coil-Connect® valves, fittings and accessories for the most specified, versatile and economical option in commercial HVAC and mechanical applications. NIBCO® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8PXG
Width:
Height:
Extra Data: 300 psi non-shock cold working pressure, DZR Brass body and tail pieces, Maximum temperature rating 260°F at 150 psi, Regulating cartridge DZR Brass and Stainless Steel
Bullet5: EPDM O-rings
Bullet6: Solder ends per ASME B16.22
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: FLO-BOSS® A
Country: Italy
Description: NIBCO FLO-BOSS Automatic Balancing Valves are ideally suited for use in HVAC and other mechanical applications that require a balanced system providing optimum flow. Each valve has 2 integral drilled and tapped ports with PT ports installed, has double uni
Height: 2.010
Length: 4.740
Material: Brass
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze check valve features threaded end connections for ease of installation. It features a screw-in bonnet for accessibility to repair or replace parts. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCXE5
Width:
Height:
Extra Data: 200 psi/13.8 bar non-shock cold working pressure, Regrindable seat, Renewable Buna-N disc, Y-pattern
Bullet5: Class 125 threaded end connections
Bullet6: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet7: Conforms to MSS SP-80
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. With the Buna-N seat disc, the check valve is recommended for
Height: 1.470
Length: 2.440
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze check valve features threaded end connections for ease of installation. It features a screw-in bonnet for accessibility to repair or replace parts. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCXE4
Width:
Height:
Extra Data: 200 psi/13.8 bar non-shock cold working pressure, Regrindable seat, Renewable Buna-N disc, Y-pattern
Bullet5: Class 125 threaded end connections
Bullet6: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet7: Conforms to MSS SP-80
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. With the Buna-N seat disc, the check valve is recommended for
Height: 1.470
Length: 2.130
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Y-strainers are installed upstream to protect valves, regulators, and meters, etc., from rust, pipe scale and dirt. The strainer is a ''''Y'''' type with a branch angled off the flow path. It features a tapped cap with blow-off plug for screen maintenance. The NIBCO Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. NIBCO Press System® valves are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707KX6G
Width:
Height:
Extra Data: Maximum service temperature 250°F, Perforated stainless steel screen, Tapped cap with plug, Valve pressure rating 200 psi/13.8 bar non shock cold working pressure
Bullet5: Class 125
Bullet6: Press x press female end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-110
Country: USA
Description: The NIBCO Press System bronze Y-strainer features press x press female end connections with an inboard bead and EPDM O-rings for quick and easy joinery to the piping system. Simply applying pressure from a press-fit tool tightens the O-ring onto the tube,
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site