Item Description
Pro-Pal valves are your best choice for efficient installation and system operation, and for helping to control costs. Pro-Pal Valves combine commonly used components into a single forged brass alternatives that will save time and space in any installation. Instead of just building your next piping system, innovate it with Pro-Pal Series Valves. Enjoy all of the labor saving advantages of Webstone with over-molded connections for heat fusion. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076RJE
Width:
Height:
Extra Data: Eliminates Assembly Needed to Isolate and Drain Any Portion of a Piped System, Exclusive Adjustable Flow Path Allow for Draining From Either Side of the Ball, Permanent Leak-Free Heat Fused Connections Made in Seconds and Compatible With All PP-R and PP-RCT Piping Systems, Reversible Handle for Added Versatility
Bullet10: Models available to satisfy all state and federal low-lead laws
Bullet11: Available in SWT, PRS
Bullet12: Available in PP-RCT SKT
Bullet13: Certified to NSF/ANSI 61 & 372
Bullet5: Saves 27 Minutes
Bullet6: Replaces 4 Components
Bullet7: Eliminates 3 Leak Paths
Bullet8: Ball valve with integral spring check saves labor, space, and leak paths
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. Designed for use with water, oil, glycol mix in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076ZDX
Width:
Height:
Extra Data: Avoids Precise Calculation, Combines Webstone Isolator and Ball Drain With Closely Spaced Tee, Eliminates Costly Field Fabrication, The Ideal Solution for Most Near Boiler Piping or Secondary Loops
Bullet10: Certified to NSF/ANSI 61
Bullet5: Simplifies Future Maintenance
Bullet6: Saves 144 Minutes
Bullet7: Replaces 17 Components
Bullet8: Eliminates 16 Leakpaths
Bullet9: Available in FIP, SWT, PRS x FIP
Country: China
Description: Hydro-Core Manifold Kit, Flange Right Manifold, Forged Brass Closely Spaced Tees w/ (2) Full Port Isolation Valves w/ Hi-Flow Hose Drains, Boiler Connections, Adjustable Packing Glands, Fully Insulated Body
Height: 4.500
Length: 9.900
Material: Brass
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCVH7
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: China
Description: The NIBCO FLO-BOSS Coil-Connect Brass Union is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and components from the system. Each union is equipped with 1 PT por
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. Designed for use with in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079T8T
Width:
Height:
Extra Data: Avoids Precise Calculation, Combines Webstone Isolator and Ball Drain With Closely Spaced Tee, Eliminates Costly Field Fabrication, The Ideal Solution for Most Near Boiler Piping or Secondary Loops
Bullet5: Simplifies Future Maintenance
Bullet6: Saves 144 Minutes
Bullet7: Replaces 17 Components
Bullet8: Eliminates 16 Leakpaths
Bullet9: Certified to NSF/ANSI 61
Country: China
Description: Hydro-Core Manifold Kit, Flange Left Manifold, Forged Brass Closely Spaced Tees w/ (2) Full Port Isolation Valves w/ Hi-Flow Hose Drains, Boiler Connections, Adjustable Packing Glands, Fully Insulated Body
Height: 4.330
Length: 9.920
Material: Brass
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8PXA
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Bullet7: Solder ends per ASME B16.22
Country: China
Description: The NIBCO FLO-BOSS Coil-Connect Brass Union is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and components from the system. Each union is equipped with 1 PT por
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. Designed for use with water, oil, glycol mix in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079T8K
Width:
Height:
Extra Data: Avoids Precise Calculation, Combines Webstone Isolator and Ball Drain With Closely Spaced Tee, Eliminates Costly Field Fabrication, The Ideal Solution for Most Near Boiler Piping or Secondary Loops
Bullet10: Certified to NSF/ANSI 61
Bullet5: Simplifies Future Maintenance
Bullet6: Saves 144 Minutes
Bullet7: Replaces 17 Components
Bullet8: Eliminates 16 Leakpaths
Bullet9: Available in FIP, SWT, PRS x FIP
Country: China
Description: Hydro-Core Manifold Kit, Flange Right Manifold, Forged Brass Closely Spaced Tees w/ (2) Full Port Isolation Valves w/ Hi-Flow Hose Drains, Boiler Connections, Adjustable Packing Glands, Fully Insulated Body
Height: 4.500
Length: 9.900
Material: Brass
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. Designed for use with in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076ZE3
Width:
Height:
Extra Data: Avoids Precise Calculation, Combines Webstone Isolator and Ball Drain With Closely Spaced Tee, Eliminates Costly Field Fabrication, The Ideal Solution for Most Near Boiler Piping or Secondary Loops
Bullet5: Simplifies Future Maintenance
Bullet6: Saves 144 Minutes
Bullet7: Replaces 17 Components
Bullet8: Eliminates 16 Leakpaths
Bullet9: Certified to NSF/ANSI 61
Country: China
Description: Hydro-Core Manifold Kit, Flange Left Manifold, Forged Brass Closely Spaced Tees w/ (2) Full Port Isolation Valves w/ Hi-Flow Hose Drains, Boiler Connections, Adjustable Packing Glands, Fully Insulated Body
Height: 4.330
Length: 9.920
Material: Brass
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. Designed for use with water, oil, glycol mix in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076ZDY
Width:
Height:
Extra Data: Avoids Precise Calculation, Combines Webstone Isolator and Ball Drain With Closely Spaced Tee, Eliminates Costly Field Fabrication, The Ideal Solution for Most Near Boiler Piping or Secondary Loops
Bullet10: Certified to NSF/ANSI 61
Bullet5: Simplifies Future Maintenance
Bullet6: Saves 144 Minutes
Bullet7: Replaces 17 Components
Bullet8: Eliminates 16 Leakpaths
Bullet9: Available in FIP, SWT, PRS x FIP
Country: China
Description: Hydro-Core Manifold Kit, Flange Right Manifold, Forged Brass Closely Spaced Tees w/ (2) Full Port Isolation Valves w/ Hi-Flow Hose Drains, Boiler Connections, Adjustable Packing Glands, Fully Insulated Body
Height: 4.530
Length: 9.920
Material: Brass
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Pressing tools, jaws and chain sets are an integral part of ensuring a reliable, permanent connection between copper piping and NIBCO Press System® fittings and valves. Use only pressing tools, jaws and chain sets that have been tested and approved for use with NIBCO Press System® fittings and valves. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains.
Item ID: 70HXZKT
Width:
Height:
Extra Data: For use with PC-20M or PC-10M press tool
AltImageName1: /NBC/PC-20MC.jpg
AltImageName2: /NBC/PC-20MC.jpg
AltImagePath1: /NBC-PC-20MC.JPEG
AltImagePath2: /NBC-PC-20MC.JPEG
Country: Germany
Description: The NIBCO Press System heavy-duty plastic replacement case is intended for use with the PC-20M press tool or the PC-10M press tool. The plastic replacement case protects the NIBCO Press System press tool on and off the job and keeps accessories organized.
Disclaimer: NIBCO Press System pecent is a registered trademark of NIBCO INC.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. Designed for use with in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079T8U
Width:
Height:
Extra Data: Avoids Precise Calculation, Combines Webstone Isolator and Ball Drain With Closely Spaced Tee, Eliminates Costly Field Fabrication, The Ideal Solution for Most Near Boiler Piping or Secondary Loops
Bullet5: Simplifies Future Maintenance
Bullet6: Saves 144 Minutes
Bullet7: Replaces 17 Components
Bullet8: Eliminates 16 Leakpaths
Bullet9: Certified to NSF/ANSI 61
Country: China
Description: Hydro-Core Manifold Kit, Flange Left Manifold, Forged Brass Closely Spaced Tees w/ (2) Full Port Isolation Valves w/ Hi-Flow Hose Drains, Boiler Connections, Adjustable Packing Glands, Fully Insulated Body
Height: 4.330
Length: 9.920
Material: Brass
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. Designed for use with water, oil, glycol mix in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076ZDP
Width:
Height:
Extra Data: Avoids Precise Calculation, Combines Webstone Isolator and Ball Drain With Closely Spaced Tee, Eliminates Costly Field Fabrication, The Ideal Solution for Most Near Boiler Piping or Secondary Loops
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® Press System is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. The lead free ball valve is specifically designed for use in systems that deliver water for human consumption. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO® Press System features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707L04Q
Width:
Height:
Extra Data: Copper-to-copper connections, Maximum service temperature 250°F, Press x PEX, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Press leak-detection feature
Bullet11: Dezincification resistant
Bullet12: Lead-free*
Bullet13: Conforms to MSS SP-145
Bullet14: NSF/ANSI/CAN-61 and 372
Bullet15: Not intended for gas use
Bullet16: IAPMO/ANSI Z1157 (IGC 157)
Bullet5: PEX end - F1807 Crimp
Bullet6: Full port
Bullet7: Blowout-proof stem
Bullet8: Reinforced PTFE seat rings
Bullet9: Multiple handle options
Country: China
Description: The NIBCO Press System ball valve body is manufactured from lead free* Brass alloy and is dezincification resistant (DZR). The ball valve is designed with a PEX x Press-to-connect end connections and is an ideal valve to transition from copper to PEX pipin
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC.
Height: 1.570
Length: 5.970
Material: Lead-Free Brass
Minimum Order Quantity: 6.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. Designed for use with water, oil, glycol mix in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079T8L
Width:
Height:
Extra Data: Avoids Precise Calculation, Combines Webstone Isolator and Ball Drain With Closely Spaced Tee, Eliminates Costly Field Fabrication, The Ideal Solution for Most Near Boiler Piping or Secondary Loops
Bullet10: Certified to NSF/ANSI 61
Bullet5: Simplifies Future Maintenance
Bullet6: Saves 144 Minutes
Bullet7: Replaces 17 Components
Bullet8: Eliminates 16 Leakpaths
Bullet9: Available in FIP, SWT, PRS x FIP
Country: China
Description: Hydro-Core Manifold Kit, Flange Right Manifold, Forged Brass Closely Spaced Tees w/ (2) Full Port Isolation Valves w/ Hi-Flow Hose Drains, Boiler Connections, Adjustable Packing Glands, Fully Insulated Body
Height: 4.720
Length: 11.220
Material: Brass
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. Designed for use with water, oil, glycol mix in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079T83
Width:
Height:
Extra Data: Avoids Precise Calculation, Combines Webstone Isolator and Ball Drain With Closely Spaced Tee, Eliminates Costly Field Fabrication, The Ideal Solution for Most Near Boiler Piping or Secondary Loops
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Pressing tools, jaws and chain sets are an integral part of ensuring a reliable, permanent connection between copper piping and NIBCO Press System® fittings and valves. Use only pressing tools, jaws and chain sets that have been tested and approved for use with NIBCO Press System® fittings and valves. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains.
Item ID: 70HXZKM
Width:
Height:
Extra Data: For use with PC-10M mini press tool
AltImageName1: /NBC/PC-5M.jpg
AltImageName2: /NBC/PC-5M.jpg
AltImagePath1: /NBC-PC-5M.JPEG
AltImagePath2: /NBC-PC-5M.JPEG
Country: Germany
Description: The NIBCO Press System standard 120V charger is intended for use with the PC-10M mini press tool. It is advisable to keep press tools charged for optimum service.
Disclaimer: NIBCO Press System pecent is a registered trademark of NIBCO INC.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. Designed for use with water, oil, glycol mix in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076ZDQ
Width:
Height:
Extra Data: Avoids Precise Calculation, Combines Webstone Isolator and Ball Drain With Closely Spaced Tee, Eliminates Costly Field Fabrication, The Ideal Solution for Most Near Boiler Piping or Secondary Loops
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® swing check valve features a screw-in bonnet for accessibility to repair or replace parts. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCWGR
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Renewable bronze disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 125 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-80
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. The bronze check valve features threaded end connections for
Height: 1.470
Length: 2.130
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Pressing tools, jaws and chain sets are an integral part of ensuring a reliable, permanent connection between copper piping and NIBCO Press System® fittings and valves. Use only pressing tools, jaws and chain sets that have been tested and approved for use with NIBCO® Press System® fittings and valves. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains.
Item ID: 70HXZJT
Width:
Height:
Country: Germany
Description: The NIBCO Press System metal replacement case is intended for use with the PC-100 press tool. The durable metal replacement case protects the NIBCO Press System press tool on and off the job.
Disclaimer: NIBCO Press System pecent is a registered trademark of NIBCO INC.
Item Description
The NIBCO® swing check valve features a screw-in bonnet for accessibility to repair or replace parts. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8PXY
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Renewable bronze disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 125 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-80
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. The bronze check valve features solder end connections for ea
Height: 1.460
Length: 2.060
Made to Order: MTO
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® check valve features a screw-in bonnet for accessibility to repair or replace parts. Swing check valves may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8QUX
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Renewable PTFE disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 125 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-139
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. The bronze check valve features solder end connections for ea
Height: 1.460
Length: 2.000
Made to Order: MTO
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site