Item Description
The strainer is a ''''Y'''' type with a branch angled off the flow path. It features a solid cap for screen maintenance. The strainers are equipped with solder end connections for easy installation. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® strainers are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8NZ1
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 20-mesh stainless steel wire screen, 200 psi/13.8 bar non-shock cold working pressure, Solid cap
Bullet5: Class 125 solder end connections
Bullet6: Dezincification resistant
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to ANSI B16.18 solder
Country: USA
Description: The NIBCO bronze Y-strainer protects equipment by filtering solids from flowing steam, gases or liquid piping systems with the use of a wire mesh straining screen. Y-strainers are installed upstream to protect valves, regulators, and meters, etc., from rus
Height: 1.850
Length: 3.810
Made to Order: MTO
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 5.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Full port, Max temperature rating 300 degrees F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Solder end connections
Bullet5: Stainless steel ball and stem
Bullet6: Vented ball
Bullet7: Blowout-proof stem
Bullet8: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet9: NIBCO® HydraPure® lead-free markings on handle and body
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineer
Height: 2.310
Length: 8.79
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Full port, Max temperature rating 300 degrees F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Threaded end connections
Bullet5: Stainless steel ball and stem
Bullet6: Vented ball
Bullet7: Blowout-proof stem
Bullet8: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet9: NIBCO® HydraPure® lead-free markings on handle and body
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engine
Height: 3.750
Length: 7.91
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO® FLO-BOSS® Combination Isolation Valves are constructed of dezincification resistant materials that provide a completely integrated balancing solution. Each valve is complete with an integral ball valve with PTFE seat, drain, union connection, one PT Port and EDPM O-rings. Additional threaded tappings are available for optional accessories. Please refer to NIBCO technical data sheets and IOM Manuals for engineering and installation information. Choose NIBCO® Coil-Connect® Kits, valves, fittings and accessories for the most specified, versatile and economical option in commercial HVAC and mechanical applications. NIBCO Coil-Connect components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR33E
Width:
Height:
Extra Data: 200 psi non-shock cold working pressure to 250°F, DZR Brass body and tail pieces, Maximum temperature rating 250°F at 200 psi, PTFE Seats
AltImageName1: /NBC/PCT1830.jpg
AltImageName2: /NBC/PCT1830.jpg
AltImagePath1: /NBC-PCT1830.JPEG
AltImagePath2: /NBC-PCT1830.JPEG
Bullet5: EPDM O-rings
Bullet6: Threaded x Press Ends
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: FLO-BOSS® I
Country: USA
Description: NIBCO FLO-BOSS Combination Isolation Valves provide a completely intergrated balancing solution. Each valve is complete with an integral ball valve, drain, union connection and one PT Port. Additional threaded tappings are available for optional accessorie
Made to Order: MTO
MadeInUSA: Yes
Material: Brass
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The strainer is a ''''Y'''' type with a branch angled off the flow path. It features a solid cap for screen maintenance. The strainers are equipped with female threaded end connections for easy installation. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® strainers are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCUH8
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 20-mesh stainless steel wire screen, 200 psi/13.8 bar non-shock cold working pressure, Solid cap
Bullet5: Class 125 threaded end connections
Bullet6: Dezincification resistant
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to ANSI B1.20.1
Country: USA
Description: The NIBCO bronze Y-strainer protects equipment by filtering solids from flowing steam, gases or liquid piping systems with the use of a wire mesh straining screen. Y-strainers are installed upstream to protect valves, regulators, and meters, etc., from rus
Height: 1.850
Length: 4.180
Made to Order: MTO
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 5.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Max temperature rating 300°F, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Country: US
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engine
MadeInUSA: Yes
Prop65: WARNING: This product can expose you to chemicals including lead, which is
known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Item Description
The strainer is a ''''Y'''' type with a branch angled off the flow path. The strainers are equipped with solder end connections for easy installation. It features either a tapped cap with blow-off plug for screen maintenance. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® strainers are backed by the NIBCO 5-year 125% limited warranty
Item ID: 70H8NYV
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 20-mesh stainless steel wire screen, 200 psi/13.8 bar non-shock cold working pressure, Tapped cap with plug
Bullet5: Class 125 solder end connections
Bullet6: Dezincification resistant
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to ANSI B16.18
Country: USA
Description: The NIBCO bronze Y-strainer protects equipment by filtering solids from flowing steam, gases or liquid piping systems with the use of a wire mesh straining screen. Y-strainers are installed upstream to protect valves, regulators, and meters, etc. from rust
Height: 1.930
Length: 4.400
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 5.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Copper-to-copper connections, Full port, Maximum service temperature 250 Degrees F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Dezincification resistant
Bullet5: Blowout-proof stem
Bullet6: Reinforced PTFE seat rings
Bullet7: Press x press female end connections
Bullet8: Press leak-detection feature
Bullet9: Multiple handle options, including NIB-Seal®
Country: USA
Description: The NIBCO Press System is user friendly, quick and easy to install. When properly crimped a unique ''N'' witness mark is clearly visible. The lead free HydraPure Performance Bronze ball valve is specifically designed for use in systems that
Height: 1.750
Length: 7.28
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
EXP Tankless Water Heater Service Valves are the preferred choice for isolating any tankless water heater. These valves provide quicker consistent quality installations, with fewer leakpaths and simplify future maintenance. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076ZD7
Width:
Height:
Extra Data: Allows for Easy Cleaning or Flushing of System, Color-coded Drain Handles, Fewer Leak Paths, Quicker, Consistent Quality Installations
Bullet10: Ball valve with integral spring check saves labor, space, and leak paths
Bullet11: Adjustable Packing Gland
Bullet12: Models available to satisfy all state and federal low-lead laws
Bullet13: Available in SWT, PRS
Bullet14: Available in FIP Union x PEX, FIP Union x FIP, FIP Union x SWT, FIP Union x PRS, FIP Union x PSH
Bullet15: Certified to NSF/ANSI/CAN 61 & 372
Bullet16: NSF/ANSI 14
Bullet17: ASSE 1061
Bullet5: Allows for One Person Diagnostic Testing
Bullet6: Also for Use with Wall Hung and Combi Boiler
Bullet7: Saves 108 Minutes
Bullet8: Replaces 14 Components
Bullet9: Eliminates 12 Leak Paths
Country: China
Description: E-X-P E2 Tankless Water Heater Service Valve Kit, Hot and Cold Set of Full Port Forged Brass Ball Valves, w/ Hi-Flow Hose Drains, Pressure Relief Valve Outlet, and Adjustable Packing Glands, Optional Pressure Relief Valves
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
EXP Tankless Water Heater Service Valves are the preferred choice for isolating any tankless water heater. These valves provide quicker consistent quality installations, with fewer leakpaths and simplify future maintenance. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079T7J
Width:
Height:
Extra Data: Allows for Easy Cleaning or Flushing of System, Color-coded Drain Handles, Fewer Leak Paths, Quicker, Consistent Quality Installations
Bullet10: Ball valve with integral spring check saves labor, space, and leak paths
Bullet11: Adjustable Packing Gland
Bullet12: Models available to satisfy all state and federal low-lead laws
Bullet13: Available in SWT, PRS
Bullet14: Available in FIP Union x PEX, FIP Union x FIP, FIP Union x SWT, FIP Union x PRS, FIP Union x PSH
Bullet15: Certified to NSF/ANSI/CAN 61 & 372
Bullet16: NSF/ANSI 14
Bullet17: ASSE 1061
Bullet5: Allows for One Person Diagnostic Testing
Bullet6: Also for Use with Wall Hung and Combi Boiler
Bullet7: Saves 108 Minutes
Bullet8: Replaces 14 Components
Bullet9: Eliminates 12 Leak Paths
Country: China
Description: E-X-P E2 Tankless Water Heater Service Valve Kit, Hot and Cold Set of Full Port Forged Brass Ball Valves, w/ Hi-Flow Hose Drains, Pressure Relief Valve Outlet, and Adjustable Packing Glands, Optional Pressure Relief Valves
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO PEX dual temperature Home Run Manifold features 32 ports, and is designed for use with NIBCO PEX in potable water and radiant heating systems. The Home Run Manifold dual temperature model features a unique plug that separates hot and cold water flow. Also available with shutoff valves (PH32D-V1 or PH32D-V2).
Item ID: 70HXZHL
Width:
Height:
Extra Data: Lead-Free, Maximum service temperature 200 degrees F, NSF-14, NSF/ANSI/CAN-61
AltImageName1: /NBC/PH32D.jpg
AltImageName2: /NBC/PH32D.jpg
AltImagePath1: /NBC-PH32D.JPEG
AltImagePath2: /NBC-PH32D.JPEG
Bullet5: Complies with ASTM F877
Bullet6: Compatible with ICC
Bullet7: CSA (on valves)
Country: USA
Description: 32-Port Home Run Manifold pecent - Dual Temperature
Disclaimer: Home Run Manifold pecent is a registered trademark of NIBCO INC.
Item Description
The NIBCO PEX dual temperature Home Run Manifold features 32 ports, and is designed for use with NIBCO PEX in potable water and radiant heating systems. The Home Run Manifold dual temperature model features a unique plug that separates hot and cold water flow. Also available with shutoff valves (PH32D-V1 or PH32D-V2).
Item ID: 70HXZHK
Width:
Height:
Extra Data: Lead-Free, Maximum service temperature 200 degrees F, NSF-14, NSF/ANSI/CAN-61
AltImageName1: /NBC/PH32D.jpg
AltImageName2: /NBC/PH32D.jpg
AltImagePath1: /NBC-PH32D.JPEG
AltImagePath2: /NBC-PH32D.JPEG
Bullet5: Complies with ASTM F877
Bullet6: Compatible with ICC
Bullet7: CSA (on valves)
Country: USA
Description: 32-Port Home Run Manifold pecent - Dual Temperature
Disclaimer: Home Run Manifold pecent is a registered trademark of NIBCO INC.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site