Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8PX9
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Bullet7: Solder ends per ASME B16.22
Country: China
Description: The NIBCO FLO-BOSS Coil-Connect Brass Union is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and components from the system. Each union is equipped with 1 PT por
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Description: Stainless steel metering stations (also known as orifice plates) are used for the measurement of water flows in heating and chilled water circuits in HVAC systems.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Blowout-proof stem, Full port, NIBCO® HydraPure® lead-free markings on handle and body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: NSF/ANSI/CAN-61
Bullet5: Standard lever handle; other handle options available
Bullet6: Dezincification resistant
Bullet7: Lead-free
Bullet8: Conforms to MSS SP-110
Bullet9: NSF/ANSI/CAN-372
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineer
Height: 3.160
Length: 5.64
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The strainer is a ''''Y'''' type with a branch angled off the flow path. It features a solid cap for screen maintenance. The strainers are equipped with female threaded end connections for easy installation. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® strainers are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCUHC
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 20-mesh stainless steel wire screen, 200 psi/13.8 bar non-shock cold working pressure, Solid cap
Bullet5: Class 125 threaded end connections
Bullet6: Dezincification resistant
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to ANSI B1.20.1
Country: USA
Description: The NIBCO bronze Y-strainer protects equipment by filtering solids from flowing steam, gases or liquid piping systems with the use of a wire mesh straining screen. Y-strainers are installed upstream to protect valves, regulators, and meters, etc., from rus
Height: 3.410
Length: 6.760
Made to Order: MTO
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Blowout-proof stem, Full port, Threaded end connections, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: NSF/ANSI/CAN-372
Bullet5: Standard lever handle; other handle options available
Bullet6: NIBCO® HydraPure® lead-free markings on handle and body
Bullet7: Dezincification resistant
Bullet8: Lead-free
Bullet9: Conforms to MSS SP-110
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engine
Height: 3.160
Length: 5.64
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The tee features solder cups. The fitting allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XLL4
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: Material, workmanship and dimensions per MSS SP-109 (5" to 8")
Bullet8: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Bullet9: UL 207 Recognized to 700 PSI (select diameters)
Country: USA
Description: The NIBCO lead-free* wrot copper solder pressure tee used in residential and commercial systems such as potable water, air conditioning and refrigeration. Options also include cleaned and bagged for oxygen service (medical gas).
Extra Data: Bronze trim blowout-proof stem, Full port, Maximum service temperature 250 Degrees F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Lead-free
Bullet5: Reinforced PTFE seat rings
Bullet6: Threaded x press female end connections
Bullet7: Press leak-detection feature
Bullet8: Multiple handle options, including NIB-Seal®
Bullet9: Dezincification resistant
Country: USA
Description: Ball Valve - Lead-Free*, Full Port, Thread x Press Ends, 250 PSI
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC. Performance Bronze pecent is a registered trademark of NIBCO INC.
Height: 2.960
Length: 10.68
MadeInUSA: Yes
Material: Lead-Free Bronze
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The tee features solder cups. The fitting allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706XLM7
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: Material, workmanship and dimensions per MSS SP-109 (5" to 8")
Bullet8: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Bullet9: UL 207 Recognized to 700 PSI (select diameters)
Country: USA
Description: The NIBCO lead-free* wrot copper solder pressure tee used in residential and commercial systems such as potable water, air conditioning and refrigeration. Options also include cleaned and bagged for oxygen service (medical gas).
Description: 1 1/2'' Extension kit for P2723199, For use in thick wall applications where trim would not normally fit, Seamless fit with all original trim parts, For use with P2723199 or PL8910-00 valve
Item Description
The NIBCO® bronze check valve features threaded end connections for ease of installation. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCXFP
Width:
Height:
Extra Data: 200 psi/13.8 bar saturated steam to 391°F/201°C, 400 psi/27.6 bar non-shock cold working pressure, Renewable bronze disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 200 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-80
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. It features a screw-in bonnet for accessibility to repair or
Height: 1.980
Length: 3.560
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Copper-to-copper connections, Full port, Maximum service temperature 250 Degrees F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Dezincification resistant
Bullet5: Blowout-proof stem
Bullet6: Reinforced PTFE seat rings
Bullet7: Press x press female end connections
Bullet8: Press leak-detection feature
Bullet9: Multiple handle options, including NIB-Seal®
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC. Performance Bronze pecent is a registered trademark of NIBCO INC.
Height: 2.310
Length: 9.88
MadeInUSA: Yes
Material: Lead-Free Bronze
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® check valve features a screw-in bonnet for accessibility to repair or replace parts. Swing check valves may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCXDK
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Renewable PTFE disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 125 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-139
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. The bronze check valve features threaded end connections for
Height: 1.950
Length: 3.560
Made to Order: MTO
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Full port, Maximum service temperature 250 Degrees F, Stainless steel trim, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Dezincification resistant
Bullet5: Blowout-proof stem
Bullet6: Reinforced PTFE seat rings
Bullet7: Threaded x press female end connections
Bullet8: Press leak-detection feature
Bullet9: Multiple handle options, including NIB-Seal®
Country: USA
Description: The NIBCO Press System is user friendly, quick and easy to install. When properly crimped a unique ''N'' witness mark is clearly visible. The lead free HydraPure Performance Bronze ball valve is specifically designed for use in systems that
Height: 2.460
Length: 8.15
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFV5F
Width:
Height:
Extra Data: Full port, Max temperature rating 300°F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Threaded end connections
Bullet11: Dezincification resistant
Bullet12: Lead-free*
Bullet13: Conforms to MSS SP-110
Bullet14: NSF/ANSI/CAN-61
Bullet15: NSF/ANSI/CAN-372
Bullet16: IAPMO/ANSI Z1157
Bullet5: Stainless steel ball and stem
Bullet6: Vented ball
Bullet7: Blowout-proof stem
Bullet8: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet9: NIBCO® HydraPure® lead-free* markings on handle and body
Country: USA
Description: The NIBCO ball valve is made of lead-free* Silicon Performance Bronze alloy and has achieved the stringent NSF/ANSI 61 section 8 (Commercial Hot) and NSF/ANSI 372 listings. The two-piece valve provides bubble-tight shutoff at 600 PSI and is dezincification
Height: 2.250
Length: 4.250
Low Lead: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8RVN
Width:
Height:
Extra Data: Full port, Max temperature rating 300°F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Solder end connections
Bullet11: Dezincification resistant
Bullet12: Lead-free*
Bullet13: Conforms to MSS SP-110
Bullet14: NSF/ANSI/CAN-61
Bullet15: NSF/ANSI/CAN-372
Bullet16: IAPMO/ANSI Z1157
Bullet5: Stainless steel ball and stem
Bullet6: Vented ball
Bullet7: Blowout-proof stem
Bullet8: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet9: NIBCO® HydraPure® lead-free* markings on handle and body
Country: USA
Description: The NIBCO ball valve is made of lead-free* Silicon Performance Bronze alloy and has achieved the stringent NSF/ANSI/CAN 61 section 8 (Commercial Hot) and NSF/ANSI/CAN 372 listings. The two-piece valve provides bubble-tight shutoff at 600 PSI and is dezinci
Height: 1.170
Length: 4.590
Low Lead: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.