Item Description
Furnish and install roof vent flashing with 25 mil. aluminum base, fitted with elastomer collar. Unit shall be Water-Tite item number checked below as manufactured by IPS Corporation, as per corresponding dimensional characteristics, or equivalent.
Item ID: 405WY5M
Width:
Height:
Finish: Aluminum
Extra Data: 25 Mil. Aluminum Base With Elastomer Collar, Approved For Type 'B'Installations, Fits Any Roof Pitch To 45, Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet5: Elastomer Collar Heat Tested To 180F
Bullet6: Limited Lifetime Warranty For The Life Of The Current Roof System
Finish Family: Silver
Height: 2.25
Length: 18
Minimum Order Quantity: 15
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Item Description
Furnish and install roof vent flashing with 25 mil. Aluminum base, fitted with adjustable multi-size elastomer collar. Unit shall be Water-Tite item number checked below as manufactured by IPS Corporation, as per corresponding dimensional characteristics, or equivalent.
Item ID: 405WX7G
Width:
Height:
Finish: Aluminum
Extra Data: 25 Mil. Aluminum Base With Elastomer Collar, Fits any roof pitch to 45 (1 1/2' and 2' vent pipe allow for a pitch range beyond 45), Multi-Size 3 N 4 Fits 3' - 4' Vent Pipe, Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet5: Approved for Type 'B'installations
Bullet6: Elastomer collar heat tested to 180F
Bullet7: Limited Lifetime Warranty for the life of the current roof system
Finish Family: Silver
Height: 2.25
Length: 16
Minimum Order Quantity: 20
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Item Description
The Air-Swirl™ Roof Vent creates as much airflow as a standard turbine vent with no moving parts. The innovative double louver design silently pulls air from the attic without having to rely on flawed ball bearings and spinning caps that reduce in efficiency over time.
Item ID: 405WX74
Width:
Height:
Finish: Gray
Extra Data: 113 square inches of NFA, 12" opening, All-aluminum construction will not rust, Limited Lifetime Warranty For The Life Of The Current Roof System
AltImageName1: /IPR/SWIRL12.jpg
AltImageName2: /IPR/SWIRL13.jpg
AltImageName3: /IPR/SWIRL14.jpg
AltImagePath1: /IPR-SWIRL12.JPEG
AltImagePath2: /IPR-SWIRL13.JPEG
AltImagePath3: /IPR-SWIRL14.JPEG
Bullet5: Heavier gauge flange than competitors
Bullet6: Innovative round design provides better pull and flow from the attic
Finish Family: Silver
Height: 8
Length: 18
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Item Description
SnapCap is the highest performance, most versatile bathroom, kitchen, and dryer exhaust vent cap available. SnapCap''s counterbalanced damper works with any CFM fan and proved a secure connection to 3'', 4'', & 6'' flexible or rigid duct.
Item ID: 405WY7F
Width:
Height:
Finish: Gray
Extra Data: 3'', 4'', & 6'' adapters for secure connection to multiple duct sizes, All-Flow capability; counterbalanced damper works with any CFM fan, Heavy gauge flange and housing for increased durability, Limited Lifetime Warranty For The Life Of The Current Roof System
AltImageName1: /IPR/81862_1.jpg
AltImageName2: /IPR/81862_3.jpg
AltImagePath1: /IPR-81862_1.JPEG
AltImagePath2: /IPR-81862_3.JPEG
Bullet5: Adapter set and cable tie included with each SnapCap
Bullet6: Adapters easily snap into the vent cap for a secure connection
Bullet7: For rootop use only
Bullet8: Remove screen when using exhausting dryer duct
Finish Family: Silver
Height: 3.5625
Length: 12.375
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Extra Data: 4 sizes in 1 for on-the-job convenience – fits pipes 1¼'' to 4'', Backed by a life of the roof warranty, Flexible PVC collar conforms to vent pipes to create a water-tight seal, Large base and nailing flange for extra coverage in freeze-thaw climates
Extra Data: .063 Gauge Aluminum, Constructed Of Heavy Guage Aluminum, Fully Insulated To Eliminate Condensation, One-Way Air Pressure Equalizer Vent System
Bullet5: Engineered To Withstand Extended Exposure To The Elements Without Deterioration
Bullet6: Will Reduce The Risk Of Ballooning, Blow-Offs, Graver Spreading, Deterioration Of Roof Insulation And Deck Seam Separation
Item Description
Furnish and install hard plastic base roof vent flashing with elastomer collar. Unit shall be WaterTite item number checked below as manufactured by IPS Corporation, as per corresponding dimensional characteristics, or equivalent.
Item ID: 405WX81
Width:
Height:
Finish: Molded
Extra Data: Approved For Type 'B'Installations, Fits Any Roof Pitch To 45, Tested For Ultraviolet, Ozone, And Weather Resistance, Thermoplastic hard base with elastomer collar
Bullet5: Elastomer Collar Heat Tested To 180F
Bullet6: Limited Lifetime Warranty For The Life Of The Current Roof System
Bullet7: 18' X 18' Available For Code Required Areas
Extra Data: Adjustable from 6' - 11', 14 1/2' Base Diameter, Flexible, Corrosion Resistant Aluminum Base Ring Conforms To Any Roof Panel Configuration, Made Of Long Life, Flexible, Weatherproof Epdm Rubber, One Piece Construction For Easy Installation
Bullet5: UV And Ozone Resistant Epdm Rubber Won't Crack
Bullet6: Clearly Marked Pipe Diameters Assure A Tight Accurate Fit
Bullet7: Pleated Cone Adusts To Any Roof Pitch
Bullet8: Continuous Service Temperature Range Of -65F To 250F
Extra Data: 4 sizes in 1 for on-the-job convenience – fits pipes 1¼'' to 4'', Backed by a life of the roof warranty, Flexible PVC collar conforms to vent pipes to create a water-tight seal, Large base and nailing flange for extra coverage in freeze-thaw climates
Extra Data: Adjustable from 2' - 7 1/4', 10 3/4' Base Diameter, Flexible, Corrosion Resistant Aluminum Base Ring Conforms To Any Roof Panel Configuration, Made Of Long Life, Flexible, Weatherproof Epdm Rubber, One Piece Construction For Easy Installation
Bullet5: UV And Ozone Resistant Epdm Rubber Won't Crack
Bullet6: Clearly Marked Pipe Diameters Assure A Tight Accurate Fit
Bullet7: Pleated Cone Adusts To Any Roof Pitch
Bullet8: Continuous Service Temperature Range Of -65F To 250F
Item Description
Furnish and install hard plastic base roof vent flashing with elastomer collar. Unit shall be WaterTite item number checked below as manufactured by IPS Corporation, as per corresponding dimensional characteristics, or equivalent.
Item ID: 405WX84
Width:
Height:
Finish: Molded
Extra Data: Approved For Type 'B'Installations, Fits Any Roof Pitch To 45, Tested For Ultraviolet, Ozone, And Weather Resistance, Thermoplastic hard base with elastomer collar
Bullet5: Elastomer Collar Heat Tested To 180F
Bullet6: Limited Lifetime Warranty For The Life Of The Current Roof System
Bullet7: 18' X 18' Available For Code Required Areas
Extra Data: .063 Gauge Aluminum, Constructed Of Heavy Guage Aluminum, Fully Insulated To Eliminate Condensation, One-Way Air Pressure Equalizer Vent System
Bullet5: Engineered To Withstand Extended Exposure To The Elements Without Deterioration
Bullet6: Will Reduce The Risk Of Ballooning, Blow-Offs, Graver Spreading, Deterioration Of Roof Insulation And Deck Seam Separation
Extra Data: 24-Gauge Galvanized Base, Fits any roof pitch to 45 (1 1/2' and 2' vent pipe allow for a pitch range beyond 45), Multi-Size 3 N 1® Flashing Fits 1 1/4' - 3' Vent Pipe, Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet5: Approved for Type 'B'installations
Bullet6: Elastomer collar heat tested to 180F
Bullet7: Limited Lifetime Warranty for the life of the current roof system
Finish Family: Steel
Length: 18
Minimum Order Quantity: 10
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Item Description
The Compact Solar™ Fan is the most compact, cost-effective solar option in the industry. The 8'' opening is ideal for upgrading from static slant-back vents without having to create another larger potential leak point in the roof.
Item ID: 405WY7K
Width:
Height:
Finish: Black
Extra Data: 2,200 RPM DC fan, 5 Watt solar panel, 8'' opening for replacement of static slant-back vents, All-aluminum construction will not rust
collection: Roofing
Finish Family: Black
Height: 6
Length: 13
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Item Description
Furnish and install roof vent flashing with 24 gauge galvanized steel base, fitted with adjustable, multi-size elastomer collar. Unit shall be Water-Tite item number checked below as manufactured by IPS Corporation, as per corresponding dimensional characteristics, or equivalent.
Item ID: 405WX7C
Width:
Height:
Finish: Galvanized Steel
Extra Data: 24-Gauge Galvanized Base, Fits any roof pitch to 45 (1 1/2' and 2' vent pipe allow for a pitch range beyond 45), Multi-Size 3 N 4 Fits 3' - 4' Vent Pipe, Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet5: Approved for Type 'B'installations
Bullet6: Elastomer collar heat tested to 180F
Bullet7: Limited Lifetime Warranty for the life of the current roof system
Finish Family: Steel
Height: 2.25
Length: 16
Minimum Order Quantity: 20
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Item Description
IPS SmartRidge™ I One-Sided Ridge Vent is the most efficient and cleanest looking ridge exhaust system. By exhausting air on one side, the SmartRidge I siphons 100% attic exhaust without pulling in exterior air, rain, snow or ice from the opposite side of the vent and provides a clean roofline with no street side lift.
Item ID: 405WY77
Width:
Height:
Finish: Black
Extra Data: 18 square inches of NFA, Fabric mesh guards against rain and snow infiltration, No street side lift for improved appearance, Provides 100% attic exhaust
Bullet5: Achieves a balanced ventilation system with SmartVent
Extra Data: Elastomer Collar Integrity Is Maintained, Eye Pleasing Matte Textured Factory Finishes, Stock Popular Colors Are Weathered Gray, Brown & Black (Custom Colors Available Upon Request With Adequate Lead Time), Weather Resistant
Bullet10: Custom Finish Metal Bases In Aluminum Or Galvanized
Item Description
Blox height extensions fasten directly on top of RTB01 to bring Blox to a 6'' overall height. XTB02 allows for a 250 lb. maximum load when mounted onto Blox and 100 lb. maximum when elevated on threaded rods.
Item ID: 405WX6Q
Width:
Height:
Extra Data: Convenient install-from-the-top engineering, Molded of UV resistant polypropylene, Notched saddle-top design for easy pipe alignment, Reinforced screw starter guides
Bullet5: Mount directly to RTB01 for 6'' piping height requirements
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Extra Data: Approved For Type 'B'Installations, Fits Any Roof Pitch To 45, Tested For Ultraviolet, Ozone, And Weather Resistance, Thermoplastic hard base with elastomer collar
Bullet5: Elastomer Collar Heat Tested To 180F
Bullet6: Limited Lifetime Warranty For The Life Of The Current Roof System
Item Description
The 360 Double Louver™ is engineered for maximum airflow. The double louver design provides extra wind, weather, and critter protection while also using exterior wind to create suction. This innovative design creates more exhaust than similar size vents.
Item ID: 405WX71
Width:
Height:
Finish: Black
Extra Data: 14" opening, 144 square inches of NFA, All-aluminum construction will not rust, Limited Lifetime Warranty For The Life Of The Current Roof System
AltImageName1: /IPR/DBL360BLACK2.jpg
AltImageName2: /IPR/DBL360BLACK3.jpg
AltImageName3: /IPR/DBL360BLACK4.jpg
AltImagePath1: /IPR-DBL360BLACK2.JPEG
AltImagePath2: /IPR-DBL360BLACK3.JPEG
AltImagePath3: /IPR-DBL360BLACK4.JPEG
Bullet5: Heavier gauge flange than competitors
Bullet6: Innovative round design provides better pull and flow from the attic
Finish Family: Black
Height: 6
Length: 19
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site