Extra Data: Adjustable from 1/4' - 2 1/2', 4 3/4' Base Diameter, Flexible, Corrosion Resistant Aluminum Base Ring Conforms To Any Roof Panel Configuration, Made Of Long Life, Flexible, Weatherproof Epdm Rubber, One Piece Construction For Easy Installation
Bullet5: UV And Ozone Resistant Epdm Rubber Won't Crack
Bullet6: Clearly Marked Pipe Diameters Assure A Tight Accurate Fit
Bullet7: Pleated Cone Adusts To Any Roof Pitch
Bullet8: Continuous Service Temperature Range Of -65F To 250F
Extra Data: .063 Gauge Aluminum, 20-Year Warranty, Constructed Of Heavy Spun Aluminum, Designed To Withstand Extended Pressure And Air Moisture Trapped Within The Roofing System, For The Purpose Of Allowing Pressure (Air Moisture) To Escape
Item Description
Furnish and install roof vent flashing with 24 gauge galvanized steel base, fitted with elastomer collar. Unit shall be Water-Tite item number checked below as manufactured by IPS Corporation, as per corresponding dimensional characteristics, or equivalent.
Item ID: 405WY52
Width:
Height:
Finish: Galvanized Steel
Extra Data: 24 Gauge Galvanized Base With Elastomer Collar, Approved For Type 'B'Installations, Fits Any Roof Pitch To 45, Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet5: Elastomer Collar Heat Tested To 180F
Bullet6: Limited Lifetime Warranty For The Life Of The Current Roof System
Finish Family: Steel
Height: 2.13
Length: 16
Minimum Order Quantity: 20
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Item Description
Furnish and install roof vent flashing with 25 mil. aluminum base, fitted with elastomer collar. Unit shall be Water-Tite item number checked below as manufactured by IPS Corporation, as per corresponding dimensional characteristics, or equivalent.
Item ID: 405WY5L
Width:
Height:
Finish: Aluminum
Extra Data: 25 Mil. Aluminum Base With Elastomer Collar, Approved For Type 'B'Installations, Fits Any Roof Pitch To 45, Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet5: Elastomer Collar Heat Tested To 180F
Bullet6: Limited Lifetime Warranty For The Life Of The Current Roof System
Finish Family: Silver
Height: 2.25
Length: 12.4
Minimum Order Quantity: 20
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Extra Data: Approved For Type 'B'Installations, Fits Any Roof Pitch To 45, Tested For Ultraviolet, Ozone, And Weather Resistance, Thermoplastic hard base with elastomer collar
Bullet5: Elastomer Collar Heat Tested To 180F
Bullet6: Limited Lifetime Warranty For The Life Of The Current Roof System
Item Description
Furnish and install roof vent flashing with 24 gauge galvanized steel base, fitted with elastomer collar. Unit shall be Water-Tite item number checked below as manufactured by IPS Corporation, as per corresponding dimensional characteristics, or equivalent.
Item ID: 405WY51
Width:
Height:
Finish: Galvanized Steel
Extra Data: 24 Gauge Galvanized Base With Elastomer Collar, Approved For Type 'B'Installations, Fits Any Roof Pitch To 45, Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet5: Elastomer Collar Heat Tested To 180F
Bullet6: Limited Lifetime Warranty For The Life Of The Current Roof System
Finish Family: Steel
Height: 2
Length: 14.5
Minimum Order Quantity: 20
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Extra Data: All Flexible, One-Piece Base And Collar, Approved For Type 'B'Installations, Fits Any Roof Pitch To 45, Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet5: Elastomer Collar Heat Tested To 180F
Bullet6: Limited Lifetime Warranty For The Life Of The Current Roof System
Finish Family: No Finish
Length: 14.75
Minimum Order Quantity: 20
Prop65: Cancer. For more information: https://www.P65warnings.ca.gov
Extra Data: .063 Gauge Aluminum, 20-Year Warranty, Constructed Of Heavy Spun Aluminum, Designed To Withstand Extended Pressure And Air Moisture Trapped Within The Roofing System, For The Purpose Of Allowing Pressure (Air Moisture) To Escape
Extra Data: Can Be Used To Instantly Repair A Leak During A Wet Period, Until The Flashing Can Be Replaced At A Later Time, Can Be Used To Repair The Elastomer Sealing Collar On All Types Of Residential 'No Caulk'Roof Vent Flashings Quickly And Easily, Eliminates the need for a mastic or caulking type messy repair job, Large Size Covers The Entire Existing Elastomer Collar
Bullet5: Fully Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet6: Individual Sizes And Multi Size Models Available
Bullet7: Better Appearance Than A Mastic Repair Job
Item Description
IPS SmartVent™ is the most versatile intake vent solution available. Constructed of durable polyethylene, SmartVent is lightweight, nail gunnable and offers a continuous venting area that can be used all the way up the roof from eave to ridge.
Item ID: 405WY75
Width:
Height:
Finish: Black
Extra Data: 9 square inches of NFA per linear foot (18 when used on both sides), Intake or exhaust for all climates, Tapered for a natural look, Use on eaves, mid-roof, off-wall, shed-wall, off-peak, dormer & valley
Bullet5: Fabric mesh guards against rain and snow infiltration
Item Description
SnapCap is the highest performance, most versatile bathroom, kitchen, and dryer exhaust vent cap available. SnapCap''s counterbalanced damper works with any CFM fan and proved a secure connection to 3'', 4'', & 6'' flexible or rigid duct.
Item ID: 405WY7J
Width:
Height:
Finish: Gray
Extra Data: 3'', 4'', & 6'' adapters for secure connection to multiple duct sizes, All-Flow capability; counterbalanced damper works with any CFM fan, Heavy gauge flange and housing for increased durability, Limited Lifetime Warranty For The Life Of The Current Roof System
AltImageName1: /IPR/81865_1.jpg
AltImageName2: /IPR/81865_3.jpg
AltImagePath1: /IPR-81865_1.JPEG
AltImagePath2: /IPR-81865_3.JPEG
Bullet5: Adapter set and cable tie included with each SnapCap
Bullet6: Adapters easily snap into the vent cap for a secure connection
Bullet7: For rootop use only
Bullet8: Remove screen when using exhausting dryer duct
Extra Data: Elastomer Collar Integrity Is Maintained, Eye Pleasing Matte Textured Factory Finishes, Stock Popular Colors Are Weathered Gray, Brown & Black (Custom Colors Available Upon Request With Adequate Lead Time), Weather Resistant
Bullet10: Custom Finish Metal Bases In Aluminum Or Galvanized
Item Description
The 360™ Roof Vent is an innovative static roof vent engineered to out-perform the standard slant-back vent. The 360™ Roof Vent is designed to pull air from the attic with no obstructions or redirections.
Item ID: 405WX6X
Width:
Height:
Finish: Gray
Extra Data: 50 square inches of NFA, 8" opening for replacement of slant-back vents, All-aluminum construction will not rust, Limited Lifetime Warranty For The Life Of The Current Roof System
AltImageName1: /IPR/360GRAY2.jpg
AltImageName2: /IPR/360GRAY3.jpg
AltImageName3: /IPR/360GRAY4.jpg
AltImagePath1: /IPR-360GRAY2.JPEG
AltImagePath2: /IPR-360GRAY3.JPEG
AltImagePath3: /IPR-360GRAY4.JPEG
Bullet5: Heavier gauge flange than competitors
Bullet6: Innovative round design provides better pull and flow from the attic
Finish Family: Silver
Height: 5
Length: 13
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Item Description
Furnish and install roof vent flashing with 25 mil. aluminum base, fitted with elastomer collar. Unit shall be Water-Tite item number checked below as manufactured by IPS Corporation, as per corresponding dimensional characteristics, or equivalent.
Item ID: 405WY5W
Width:
Height:
Finish: Aluminum
Extra Data: 25 Mil. Aluminum Base With Elastomer Collar, Approved For Type 'B'Installations, Fits Any Roof Pitch To 45, Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet5: Elastomer Collar Heat Tested To 180F
Bullet6: Limited Lifetime Warranty For The Life Of The Current Roof System
Finish Family: Silver
Height: 2.25
Length: 18
Minimum Order Quantity: 15
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Item Description
Large aluminum roller supports 4'' to 6'' diameter pipe and can be mounted directly on top of Blox or elevated on ROD03 extension rods.
Item ID: 405WX6V
Width:
Height:
Extra Data: Aluminum roller supports 4'' to 6'' diameter pipe, Can be mounted directly onto RTB01 and XTB01, For elevated installation use ROD03 extension rods, Includes strut, bolts, and mounting screws
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Prop65: This product can expose you to chemicals including Hydrous Magnesium Aluminum Silicate (palygorskite fibers), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Item Description
SnapCap is the highest performance, most versatile bathroom, kitchen, and dryer exhaust vent cap available. SnapCap''s counterbalanced damper works with any CFM fan and proved a secure connection to 3'', 4'', & 6'' flexible or rigid duct.
Item ID: 405WY7G
Width:
Height:
Finish: Brown
Extra Data: 3'', 4'', & 6'' adapters for secure connection to multiple duct sizes, All-Flow capability; counterbalanced damper works with any CFM fan, Heavy gauge flange and housing for increased durability, Limited Lifetime Warranty For The Life Of The Current Roof System
AltImageName1: /IPR/81863_1.jpg
AltImageName2: /IPR/81863_3.jpg
AltImagePath1: /IPR-81863_1.JPEG
AltImagePath2: /IPR-81863_3.JPEG
Bullet5: Adapter set and cable tie included with each SnapCap
Bullet6: Adapters easily snap into the vent cap for a secure connection
Bullet7: For rootop use only
Bullet8: Remove screen when using exhausting dryer duct
Item Description
Furnish and install roof vent flashing with 24 gauge galvanized steel base, fitted with elastomer collar. Unit shall be Water-Tite item number checked below as manufactured by IPS Corporation, as per corresponding dimensional characteristics, or equivalent.
Item ID: 405WY55
Width:
Height:
Finish: Galvanized Steel
Extra Data: 24 Gauge Galvanized Base With Elastomer Collar, Approved For Type 'B'Installations, Fits Any Roof Pitch To 45, Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet5: Elastomer Collar Heat Tested To 180F
Bullet6: Limited Lifetime Warranty For The Life Of The Current Roof System
Finish Family: Steel
Height: 2.25
Length: 18
Minimum Order Quantity: 15
Prop65: Cancer and Reproductive Harm. For more information: https://www.P65warnings.ca.gov
Extra Data: Can Be Used To Instantly Repair A Leak During A Wet Period, Until The Flashing Can Be Replaced At A Later Time, Can Be Used To Repair The Elastomer Sealing Collar On All Types Of Residential 'No Caulk'Roof Vent Flashings Quickly And Easily, Eliminates the need for a mastic or caulking type messy repair job, Large Size Covers The Entire Existing Elastomer Collar
Bullet5: Fully Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet6: Individual Sizes And Multi Size Models Available
Bullet7: Better Appearance Than A Mastic Repair Job
Extra Data: .063 Gauge Aluminum, Cap Has Been Engineered To Eliminate Any Possibility Of Backwash, Constructed Of Heavy Gauge Spun Aluminum, Designed To Withstand Extended Exposure To The Toughest Elements Without Deterioration
Bullet5: Cannot Become Detached From The Main Stack, Protecting From The Possibility Of Exposing The Breather Holes
Extra Data: All Flexible, One-Piece Base And Collar, Approved For Type 'B'Installations, Fits Any Roof Pitch To 45, Tested For Ultraviolet, Ozone, And Weather Resistance
Bullet5: Elastomer Collar Heat Tested To 180F
Bullet6: Limited Lifetime Warranty For The Life Of The Current Roof System
Finish Family: No Finish
Length: 11.375
Minimum Order Quantity: 20
Prop65: Cancer. For more information: https://www.P65warnings.ca.gov
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site