Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFX3W
Width:
Height:
Extra Data: Conventional port, Max temperature rating 300°F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Dezincification resistant
Bullet5: Stainless steel ball and stem
Bullet6: Blowout-proof stem
Bullet7: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet8: NIBCO® HydraPure® lead-free* markings on handle and body
Bullet9: Threaded end connections
Country: US
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engine
Height: 2.950
Length: 8.840
Low Lead: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Engineered with a modular approach, NIBCO® electric actuation systems offer the flexibility to actuate new valves or to retrofit existing valves with unprecedented ease. Electric actuation systems feature an ISO standard mounting design, assuring long-term industry acceptance. Choose NIBCO® flow control products for the most specified, versatile and economical option in commercial and industrial applications. NIBCO® actuation products are backed by the NIBCO limited warranty.
Item ID: 70J4CN6
Width:
Height:
Extra Data: Case hardened steel drive shaft, Case hardened steel spur gear train is permanently lubricated, Operating temperatures -40°F with standard heater activated, to +140°F, Thermostat and heater installed
Bullet10: Two single-pole double-throw end of travel micro switches with adjustable cams
Bullet5: Single phase capacitor run motor with thermal overload protection
Bullet6: Declutchable manual override with position indicator
Bullet7: Dual machined conduit entrances
Bullet8: Captive slotted hex bolts on enclosure
Bullet9: Operational in any mounting orientation
Country: US
Description: Electric Actuators - Mid-Range Torque, NEMA 4 and 7
Height: 7.750
Length: 9.750
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Full port, Max temperature rating 300 Degrees F, Silicon Performance Bronze® body, ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Lead-free
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet7: NIBCO® HydraPure® lead-free markings on handle and body
Bullet8: Threaded end connections
Bullet9: Dezincification resistant
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engine
Height: 2.840
Length: 8.89
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
892 Sanitary (lined) Butterfly Valves for sanitary applications in Chemical and Food Processing Industries. Lug style available in sizes (from 2” to 12”) have 25-5 duplex SS bodies lined with PTFE, FDA EPDM, FDA Nitrile (Black or White) or fluorocarbon seats to meet a broad range of chemical compatibility requirements. Standard 25-5 duplex SS disc & stem is more corrosion resistant and twice as strong as 316 SS. Valve body is two piece allowing for easy seat replacement and disc/stem replacement.
Item ID: 70J1642
Width:
Height:
Extra Data: Lug style, Seats: PTFE, FDA EPDM, FDA Nitrile (Black or White) or fluorocarbon, Standard operating temperature -40°F to 350°F, Valve pressure rating 150 psi
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Full port, Max temperature rating 300 Degrees F, Silicon Performance Bronze® body, ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Lead-free
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet7: NIBCO® HydraPure® lead-free markings on handle and body
Bullet8: Solder end connections
Bullet9: Dezincification resistant
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineer
Height: 2.840
Length: 9.25
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron check valve features threaded end connections for easy installation. It is equipped with a bolted bonnet for maintenance accessibility. The swing check valve includes a renewable cast bronze seat and disc. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJRXZ
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Bolted bonnet, Bronze mounted trim
Bullet5: Renewable seat and disc
Bullet6: Class 125 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The PVC DWV 45-degree wye features a hub x hub x hub connection and allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707DVWZ
Width:
Height:
Finish: White
Extra Data: ASTM D2665 and D3311, Do not test or use with compressed air or other gases, Maximum service temperature 140°F, NSF/ANSI Standard 14
Item Description
The lug type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve also provides bi-directional dead-end service and includes an arrow on the body to indicate the recommended flow direction. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the 316 stainless steel body, direct mount actuation, integrally cast disc-stop and dual offset design, one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose SureSeal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70J154X
Width:
Height:
Extra Data: Lug style, Maximum operating temperature 400°F at 100 psi, Seats: Glass reinforced PTFE (standard); PTFE; UHMWPE, Valve pressure rating 285 psi
Bullet10: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze Y-strainer protects equipment by filtering solids from flowing liquids in the piping system with the use of a wire mesh straining screen. The strainer is a ''''Y'''' type with a branch angled off the flow path. It features a solid cap for screen maintenance. The NIBCO Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. NIBCO Press System® valves are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707H4EP
Width:
Height:
Extra Data: 20-mesh stainless steel wire screen, Maximum service temperature 250°F, Solid cap, Valve pressure rating 200 psi/13.8 bar non shock cold working pressure
Bullet5: Class 125
Bullet6: Press x press female end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The wafer type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve includes an arrow on the body to indicate the recommended flow direction. It includes a one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the powder coated epoxy finish, direct mount actuation, integrally cast disc-stop and dual offset design. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose Sure Seal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70J162H
Width:
Height:
Extra Data: Blowout-proof stem, Seats: Glass reinforced PTFE (standard); PTFE; UHMWPE, Standard operating temperature -20°F to 482°F, Wafer style
Bullet10: MSS SP-68 (design) 100% production tested
Bullet5: Stainless steel disc and stem
Bullet6: Integrally cast disc stop
Bullet7: Dual offset design
Bullet8: Direct mount actuation
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Description: _This is a collection for items that we don''t want to show online_
Material: Lead-Free Bronze
Prop65: WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The wafer type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve includes an arrow on the body to indicate the recommended flow direction. It includes a one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the powder coated epoxy finish, direct mount actuation, integrally cast disc-stop and dual offset design. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose Sure Seal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70J144H
Width:
Height:
Extra Data: Blowout-proof stem, Seats: Glass reinforced PTFE (standard); PTFE; UHMWPE, Standard operating temperature -20°F to 482°F, Wafer style
Bullet10: MSS SP-68 (design) 100% production tested
Bullet5: Stainless steel disc and stem
Bullet6: Integrally cast disc stop
Bullet7: Dual offset design
Bullet8: Direct mount actuation
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR52C
Width:
Height:
Extra Data: 200 psi non-shock cold working pressure to 250°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
AltImageName1: /NBC/PCT1800.jpg
AltImageName2: /NBC/PCT1800.jpg
AltImagePath1: /NBC-PCT1800.JPEG
AltImagePath2: /NBC-PCT1800.JPEG
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - Press Body x FPT Tailpiece
Length: 5.300
Made to Order: Yes
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® indicator post is an upright type for operating non-rising stem gate valves in buried service. Indicators posts display the disposition (open/shut) of the gate valve below from a distance and are required on NRS gate valves in buried sprinkler service. These posts feature height adjustability to varying bury depths. They are Underwriters Listed and FM Approved for fire protection systems. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valve products for the most specified, versatile and economical option in commercial, mechanical, fire protection and industrial applications. NIBCO® pressure rated valves and accessories are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HY0JJ
Width:
Height:
Extra Data: FM Approved, Listed by Underwriters Laboratories (UL)
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Description: _This is a collection for items that we don''t want to show online_
Material: Lead-Free Bronze
Prop65: WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The lug type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve also provides bi-directional dead-end service and includes an arrow on the body to indicate the recommended flow direction. It includes a one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the powder coated epoxy finish, direct mount actuation, integrally cast disc-stop and dual offset design. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose Sure Seal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70J1916
Width:
Height:
Extra Data: Glass reinforced PTFE seats, Lug style, Maximum operating temperature 400°F at 100 psi, Valve pressure rating 740 psi
Bullet10: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HR51E
Width:
Height:
Extra Data: 200 psi non-shock cold working pressure to 250°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
AltImageName1: /NBC/MTPC1800.jpg
AltImageName2: /NBC/MTPC1800.jpg
AltImagePath1: /NBC-MTPC1800.JPEG
AltImagePath2: /NBC-MTPC1800.JPEG
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSS™ U
Country: CN
Description: Union w/Test Port - MPT Body X Press Tailpiece
Length: 5.810
Made to Order: Yes
Material: Brass
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The lug type butterfly valve features live loaded adjustable packing with a unique flush-mounted packing gland. The high performance valve also provides bi-directional dead-end service and includes an arrow on the body to indicate the recommended flow direction. Seats are glass reinforced PTFE to provide exceptional chemical and heat resistance. Other features include the powder coated epoxy finish, direct mount actuation, integrally cast disc-stop and dual offset design, one-piece, blowout-proof 17-4PH stainless steel stem with 304 stainless steel bushings PTFE coated. Please refer to Sure Seal technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose Sure Seal® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. Sure Seal® high performance butterfly valves are backed by the Sure Seal 5-year 125% limited warranty.
Item ID: 70J42UU
Width:
Height:
Extra Data: Lug style, Seats: Glass reinforced PTFE (standard); PTFE; UHMWPE, Standard operating temperature -20°F to 482°F, Valve pressure rating 285 psi
Bullet10: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. Options include NIB-SEAL® insulated handle that eliminates condensate. The two-piece valve is ideal for commercial and light industrial process applications that may include HVAC, hot and cold domestic water, low pressure steam and hot water heating service. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFV5K
Width:
Height:
Extra Data: Conventional port, Maximum temperature rating 400°F, Stainless steel ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet5: Blowout-proof stem
Bullet6: Vented ball
Bullet7: Standard lever handle, optional NIB-SEAL®
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 2.250
Length: 5.200
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® flanged cast iron gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L33R
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Bolted bonnet, Non-rising stem
AltImageName1: /NBC/F619.jpg
AltImageName2: /NBC/F619.jpg
AltImagePath1: /NBC-F619.JPEG
AltImagePath2: /NBC-F619.JPEG
Bullet5: Solid wedge
Bullet6: Class 125 flanged end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-70
Country: US
Description: The NIBCO flanged cast iron gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and cat
Disclaimer: *14''-16'' maximum 100 psi steam, 150 psi cold working pressure
Height: 10.000
Length: 22.000
MadeInUSA: Yes
Material: Cast Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. Options include NIB-SEAL® insulated handle that eliminates condensate. The valve is ideal for commercial and light industrial process applications that may include HVAC, hot and cold domestic water, low pressure steam and hot water heating service. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8TTL
Width:
Height:
Extra Data: Conventional port, Maximum temperature rating 400°F, Stainless steel ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Use in U.S. drinking water applications is prohibited after January 3, 2014
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
Height: 2.250
Length: 5.010
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® flanged cast iron gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 707L33T
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Bolted bonnet, Non-rising stem
AltImageName1: /NBC/F619.jpg
AltImageName2: /NBC/F619.jpg
AltImagePath1: /NBC-F619.JPEG
AltImagePath2: /NBC-F619.JPEG
Bullet5: Solid wedge
Bullet6: Class 125 flanged end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-70
Country: US
Description: The NIBCO flanged cast iron gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and cat
Disclaimer: *14''-16'' maximum 100 psi steam, 150 psi cold working pressure
Height: 11.000
Length: 26.500
MadeInUSA: Yes
Material: Cast Iron
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The wye features solder cups. The fitting provides a means of splitting a branch line equally in two directions. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 7070M8H
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.18, Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® cast iron check valve features flanged end connections for easy installation. It is equipped with a bolted bonnet for maintenance accessibility. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8LY9
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Bolted bonnet, Bronze mounted trim
Bullet5: Renewable seat and disc
Bullet6: Class 125 flanged end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site