Item Description
Table top water heaters are a good choice when installations are in kitchens or other work areas that require additional counter space.
Item ID: 804X4ZT
Width:
Height:
Extra Data: 4'' high back splash protects interior wall from spills and stains, Baked enamel counter top is acid and heat resistant, Channel at rear accommodates piping and permits water heater to fit snugly against back wall, Recessed base provides comfortable standing area while working
Bullet5: More hot water at a low operating cost
Bullet6: Durable direct immersion resistored heating element
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804XDTQ
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Delivers 90 to 190 deg F water, Installs close to fixtures, eliminating the wait for hot water, Lifeguard heating elements - resist corrosion and burnout, separate screw-in type elements feature a stainless steel outer sheath of Incoloy 840, which surrounds the Nichrome wire filament, Long life ASME tank design - proprietary steel formulation with high temperature porcelain enamel maximizes corrosion-resistance
Bullet5: Immersion thermostat
Bullet6: Water connections - hot outlet and cold inlet are 3/4'' NPT plastic lined nipples which prevent excessive turbulence of heated water and results in optimum tank draw
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Bullet9: Two anode rods are installed to ensure long life and corrosion-resistance
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053C9D
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053F63
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Extra Data: Exclusive Rheemglas tank lining resists corrosion, Gas master burner with precision port alignment for even heat transfer, Heat saving flue baffle design, R-foam insulation for superior heat retention
Family: Ferry
Bullet5: Model specific burners engineered for high MJ/H input
Bullet6: LP models feature durable stainless steel burners designed specifically for LP gas
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 80506NC
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Delivers 90 to 190 deg F water, Installs close to fixtures, eliminating the wait for hot water, Lifeguard heating elements - resist corrosion and burnout, separate screw-in type elements feature a stainless steel outer sheath of Incoloy 840, which surrounds the Nichrome wire filament, Long life ASME tank design - proprietary steel formulation with high temperature porcelain enamel maximizes corrosion-resistance
Bullet5: Immersion thermostat
Bullet6: Water connections - hot outlet and cold inlet are 3/4'' NPT plastic lined nipples which prevent excessive turbulence of heated water and results in optimum tank draw
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 8053G4H
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053C8W
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053F5M
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
Eclipse non-metallic electric commercial water heaters are durable, lightweight, and offer an exclusive 10 years limited warranty.
Item ID: 8053E7N
Width:
Height:
Extra Data: High density polyethylene dent and scratch-resistant jacket, Input options: 12.4, 18 or 24 kW, Non-metallic, lightweight composite tank - no anode rod required, System Sentinel LED indicators are provided for each element to show when power is on
Family: Eclipse
Bullet5: Voltage options: 208, 240, or 480 VAC in either 1 ph or 3 ph (277 VAC in 1 ph only)
Bullet6: Element wattages: 3100, 4500 or 6000 in each of the 4 voltages
Bullet7: The elements are low watt density design (46, 67, 90 W/sq-in) with titanium sheath for superior protection
Bullet8: Power control circuits use two surface mounted thermostats and operate in two stages - lower control is for the lower two elements, which provides recovery for most needs, - upper control is for the upper two elements, which operates during high demands
Item Description
Solaraide tanks with multi-port connections are available as electric backup water heaters and as storage tanks for solar water heating systems.
Item ID: 80506MX
Width:
Height:
Extra Data: Collector feed and return fittings conveniently located on front of tank for easy installation, Connection ports on the top, right and left side fit more installations and reduce SKUs, Electric backup model provides at least 40 gal of stored hot water, Two well insulated models to choose from a storage tank or a high-efficiency 4500 W backup electric water heater
Family: Solaraide
Bullet10: Temperature and pressure relief valve included Electric backup model has automatic temperature control and over heat
Bullet5: A special 1/2'' NPT opening is provided for installation of a probe type thermostat
Bullet6: Durable brass drain valve for easy maintenance
Bullet7: Cold water inlet brings cold water to tank bottom to prevent mixing with heated water
Bullet8: Rheemglas tank lining resists corrosion and prolongs tank life
Bullet9: Anode rod equalizes aggressive action for prolonged tank life
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Bullet9: Two anode rods are installed to ensure long life and corrosion-resistance
Item Description
Eclipse non-metallic electric commercial water heaters are durable, lightweight, and offer an exclusive 10 years limited warranty.
Item ID: 804XDUR
Width:
Height:
Extra Data: High density polyethylene dent and scratch-resistant jacket, Input options: 12.4, 18 or 24 kW, Non-metallic, lightweight composite tank - no anode rod required, System Sentinel LED indicators are provided for each element to show when power is on
Family: Eclipse
Bullet5: Voltage options: 208, 240, or 480 VAC in either 1 ph or 3 ph (277 VAC in 1 ph only)
Bullet6: Element wattages: 3100, 4500 or 6000 in each of the 4 voltages
Bullet7: The elements are low watt density design (46, 67, 90 W/sq-in) with titanium sheath for superior protection
Bullet8: Power control circuits use two surface mounted thermostats and operate in two stages - lower control is for the lower two elements, which provides recovery for most needs, - upper control is for the upper two elements, which operates during high demands
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053C8D
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 8053G5H
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Table top water heaters are a good choice when installations are in kitchens or other work areas that require additional counter space.
Item ID: 804XER8
Width:
Height:
Extra Data: 4'' high back splash protects interior wall from spills and stains, Baked enamel counter top is acid and heat resistant, Channel at rear accommodates piping and permits water heater to fit snugly against back wall, Recessed base provides comfortable standing area while working
Bullet5: More hot water at a low operating cost
Bullet6: Durable direct immersion resistored heating element
Item Description
Hot water supply heaters are designed for applications that require high inputs and large volumes of stored hot water. Rheem hot water supply heaters are designed to provide hot water service to a variety of commercial applications when used in conjunction with an appropriately sized storage tank. Choose from 82 percent thermal efficiency models that range from 136000-1826000 Btu/h and have maximum temperature setting of 180 deg F. Applications include indoor installation and for use with or without a circulating pump.
Item ID: 80506MM
Width:
Height:
Extra Data: Compact design - the low water heater mass design offers substantial savings in weight and cube over most cast iron, steel tube and storage type water heaters making it ideal for rooftop installations and in tight quarters, Energy saving pump control - the energy saving pump control is an electric device that allows the operator to set the desired time for the pump to run after the water heater shuts off, Reliable heat exchanger design - the all copper heat exchanger is a single bank, straight-through design with a floating return header immune to thermal shock, Spark-to-pilot (IID)- this system is standard on all models for minimal heat loss
Bullet5: Glass lined cast iron headers - these headers handle any aggressive water conditions
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site