Item Description
Eliminate the wait for hot water at your faucet or sink with Rheem mini-tank. Easy to install, simply tap into the water line and plug into a standard 120 V electrical outlet for hot water directly at your point-of-use. With mini-tank, there is no need for costly recirculation lines and pumps. These units can supplement traditional water heaters, conserving water and energy which results in cost savings for you.
Item ID: 8056AXT
Width:
Height:
Extra Data: Adjustable temperature control 50 to 140 deg F, Compact design fits virtually anywhere, Standard 15 A plug for 120 V outlets (no hard wiring necessary), Use with hot or cold water feed
Bullet10: Tank status indicator light - green: ready mode, red: heating mode
Bullet11: Eliminates the wait for hot water
Bullet12: Plug-n-play solution that is easy to understand, install, and service
Bullet13: Useful in a variety of applications
Bullet5: Temperature and pressure relief valve included
Bullet6: Enameled glass lined tank for extended life
Bullet7: Floor and wall mountable, wall bracket included
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Bullet9: Two anode rods are installed to ensure long life and corrosion-resistance
Item Description
Eclipse non-metallic electric commercial water heaters are durable, lightweight, and offer an exclusive 10 years limited warranty.
Item ID: 804XDUV
Width:
Height:
Extra Data: High density polyethylene dent and scratch-resistant jacket, Input options: 12.4, 18 or 24 kW, Non-metallic, lightweight composite tank - no anode rod required, System Sentinel LED indicators are provided for each element to show when power is on
Family: Eclipse
Bullet5: Voltage options: 208, 240, or 480 VAC in either 1 ph or 3 ph (277 VAC in 1 ph only)
Bullet6: Element wattages: 3100, 4500 or 6000 in each of the 4 voltages
Bullet7: The elements are low watt density design (46, 67, 90 W/sq-in) with titanium sheath for superior protection
Bullet8: Power control circuits use two surface mounted thermostats and operate in two stages - lower control is for the lower two elements, which provides recovery for most needs, - upper control is for the upper two elements, which operates during high demands
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804X8WL
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 8050CK6
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Professional Classic tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use applications.
Item ID: 8053C6Q
Width:
Height:
Extra Data: 99.8 percent energy efficient, Compact and stylish with digital temperature control in increments of 1 deg F ranging from 80 to 140 deg F, On demand, continuous hot water, Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement
Extra Data: Digital LED display communicates system status and heater operation feedback, Low flow activation at 0.3 GPM, Self-diagnostics with intelligent controls actively protect heater in installed environment, Silent operation on all models except for RTEH012240MV
Bullet10: No T and P relief valve needed (check local codes), ready to go, right out-of-the-box
Bullet11: Save water and time by installing unit at the point-of-use
Bullet12: Control system activates heater only on demand
Bullet13: High temperature limit switch enables safe operation
Bullet14: Active energy management with power modulation allows for thermostatic accuracy
Bullet5: Mounts in any orientation for a flexible installation
Bullet6: Compact size fits almost anywhere; suitable for ADA compliant facilities
Bullet7: Only one input line, hot or cold, needed for an easy installation
Bullet8: Designed to deliver hot water to a single pipe faucet or mixing faucets
Bullet9: Integral 3/8'' compression fittings, no soldering or sweat connections required
Extra Data: Our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence, The short heights and narrow jacket diameters, plus the top, front and rear water inlets/outlets offer the ultimate in installation flexibility, The tighter the commercial retrofit, the more you will appreciate how the universal''s compact size and multiple water connections simplify installations, choose from 80 percent thermal efficiency models that range from 98000-399900 Btu/hr and have, Universal''s proprietary steel formulation, patented multi-flue design, combined with two coats of porcelain enamel, results in a superior heat exchanger design
Bullet10: Anode design utilizes multiple magnesium rods to ensure corrosion-resistance for a long tank life
Bullet5: Precision burners, raised port design, are formed from high chromium stainless steel, each burner assembly slides out like a drawer for quick inspection and maintenance
Bullet6: Low profile damper minimizes overall product height, heavy-duty vent hood supports are designed to withstand the rigors of installation
Bullet7: Factory installed brass drain valve allows for faster draining and servicing
Bullet8: Energy saving ignition that ignites pilot only when there is a call for heat
Bullet9: Up to 5000'' for natural gas and 2000'' for LP with high altitude certification kit, up to 8000''
Item Description
Point-of-Use commercial electric line is designed to provide hot water at the consumption point, eliminating costly temperature loss in long piping runs.
Item ID: 8053E80
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Automatic temperature control, Efficient design, Long life heating elements, Long life tank design
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Bullet9: Two anode rods are installed to ensure long life and corrosion-resistance
Item Description
PERFORMANCE PLUS ultra low NOx gas water heaters offer a 9 years warranty and are SCAQMD rule 1121 compliant with 10ng/J NOx emissions.
Item ID: 80569YX
Width:
Height:
Extra Data: Exclusive fuel shut-off device, FHR: 86 gal for 50 gal model and 71 gal for 40 gal model, Recovery: 38 gph at a 90 deg F rise, Self-powered diagnostic gas control valve for improved monitoring and service
Family: Performance Plus
Bullet10: Meets 10 ng/J NOx requirements
Bullet11: Fights sediment and mineral build-up
Bullet12: Reduces fuel costs
Bullet13: No matches required
Bullet14: Premium grade anode rod provides long-lasting tank protection
Bullet15: All models certified to 10000'' above sea level
Bullet16: Temperature and pressure relief valve included
Bullet17: Low lead compliant
Bullet5: Maintenance free - no filter to clean
Bullet6: Disables the heater in the presence of flammable vapor accumulation
Item Description
Professional Classic atmospheric gas water heaters for manufactured housing feature the guardian system efficiency.
Item ID: 8050CKA
Width:
Height:
Extra Data: Exclusive air/fuel shut-off device, FHR: 60 gal for 40 gal model and 59 gal for 29 gal model, Premium grade anode rod provides long-lasting tank protection, Recovery: 30.3-34.3 gph at a 90 deg F rise, depending on model
Family: Professional Classic
Bullet10: High altitude model available for 29 gal (4500''-10000'')
Bullet11: Certified for manufactured (HUD) and modular construction
Bullet12: EverKleen patented system fights sediment build-up
Bullet5: Maintenance free - no filter to clean
Bullet6: Disables the heater in the presence of flammable vapor accumulation
Bullet7: Field convertible controls and burner assembly for natural gas or LP operation included
Bullet8: Eco-friendly burner, low NOx design
Bullet9: All models certified up to 8400'' above sea level
Extra Data: Compact size fits almost anywhere; suitable for ADA compliant facilities, Low flow activation at 0.25 GPM (model dependent), Mounts in any orientation for a flexible installation, Only one cold water line needed for an easy installation
Bullet5: No T and P relief valve needed (check local codes), ready to go, right out-of-the-box
Bullet6: Save water and time by installing unit at the point-of-use
Bullet7: Integral 3/8'' compression fittings, no soldering or sweat connections required
Bullet8: Control system activates heater only on demand
Bullet9: High temperature limit switch enables safe operation
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053F4D
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 8053G5E
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Professional Classic Plus atmospheric gas water heaters are engineered for more hot water at a low operating cost.
Item ID: 8050CKN
Width:
Height:
Extra Data: Exclusive air/fuel shut-off device, FHR: 52-105 gal, More hot water at a low operating cost, Recovery: 36.4-61 gph at a 90 deg F rise, depending on model
Family: Professional Classic Plus
Bullet10: Easy to light - no matches required
Bullet11: EverKleen patented system fights sediment build-up
Bullet12: Enhanced flow brass drain valve
Bullet13: Temperature and pressure relief valve included
Bullet14: Low lead compliant
Bullet15: Standard replacement parts
Bullet5: Maintenance free - no filter to clean
Bullet6: Protective control system that disables the heater in the presence of flammable vapor accumulation
Bullet7: Eco-friendly burner, low NOx design
Bullet8: Meets 40 ng/J NOx requirements
Bullet9: Premium grade anode rod provides long-lasting tank protection
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804X7YG
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site