Item Description
Hot water supply heaters are designed for applications that require high inputs and large volumes of stored hot water. Rheem hot water supply heaters are designed to provide hot water service to a variety of commercial applications when used in conjunction with an appropriately sized storage tank. Choose from 82 percent thermal efficiency models that range from 136000-1826000 Btu/h and have maximum temperature setting of 180 deg F. Applications include indoor installation and for use with or without a circulating pump.
Item ID: 804XCUL
Width:
Height:
Extra Data: Compact design - the low water heater mass design offers substantial savings in weight and cube over most cast iron, steel tube and storage type water heaters making it ideal for rooftop installations and in tight quarters, Energy saving pump control - the energy saving pump control is an electric device that allows the operator to set the desired time for the pump to run after the water heater shuts off, Reliable heat exchanger design - the all copper heat exchanger is a single bank, straight-through design with a floating return header immune to thermal shock, Spark-to-pilot (IID)- this system is standard on all models for minimal heat loss
Bullet5: Glass lined cast iron headers - these headers handle any aggressive water conditions
Item Description
Professional Classic tankless electric water heaters offer continuous hot water quick and on demand for multiple applications.
Item ID: 8053C9F
Width:
Height:
Extra Data: 99.8 percent energy efficient, Compact and stylish with digital temperature control in increments of 1 deg F ranging from 80 to 140 deg F, On demand, continuous hot water, Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement
Item Description
Professional Classic ultra low NOx gas water heaters are SCAQMD rule 1121 compliant with 10 ng/J NOx emissions.
Item ID: 8053E6D
Width:
Height:
Extra Data: Exclusive fuel shut-off device for double protection, FHR: 51-86 gal for natural gas, Maintenance free - no filter to clean, Recovery: 30-40 gph at 90 deg F rise, depending on model
Family: Professional Classic
Bullet10: EverKleen patented system fights sediment build-up
Bullet11: Reduces fuel costs
Bullet12: Provides more hot water
Bullet13: No matches required Longer Life
Bullet14: Enhanced flow brass drain valve
Bullet15: Temperature and pressure relief valve included
Bullet5: Protective control system that disables the heater in the presence of flammable vapor accumulation
Item Description
Point-of-Use commercial electric line is designed to provide hot water at the consumption point, eliminating costly temperature loss in long piping runs.
Item ID: 804X9VF
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Automatic temperature control, Efficient design, Long life heating elements, Long life tank design
Item Description
Hot water supply heaters are designed for applications that require high inputs and large volumes of stored hot water. Rheem hot water supply heaters are designed to provide hot water service to a variety of commercial applications when used in conjunction with an appropriately sized storage tank. Choose from 82 percent thermal efficiency models that range from 136000-1826000 Btu/h and have maximum temperature setting of 180 deg F. Applications include indoor installation and for use with or without a circulating pump.
Item ID: 804XCV4
Width:
Height:
Extra Data: Compact design - the low water heater mass design offers substantial savings in weight and cube over most cast iron, steel tube and storage type water heaters making it ideal for rooftop installations and in tight quarters, Energy saving pump control - the energy saving pump control is an electric device that allows the operator to set the desired time for the pump to run after the water heater shuts off, Reliable heat exchanger design - the all copper heat exchanger is a single bank, straight-through design with a floating return header immune to thermal shock, Spark-to-pilot (IID)- this system is standard on all models for minimal heat loss
Bullet5: Glass lined cast iron headers - these headers handle any aggressive water conditions
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053C8Y
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
Rheem Prestige RTGH is a series of high efficiency condensing tankless gas water heaters designed for continuous hot water.
Item ID: 8053E6Y
Width:
Height:
Extra Data: Exclusive! water savings setting upon activation, this setting can save homeowners up to 1100 gal of water per year by decreasing the flow of water through the pipes until the temperature reaches the heaters set temperature, Intelligent electronic controls designed to increase energy efficiency and safety, Low flow fixture compatible - industry first minimum flow rate of 0.26 gpm and minimum activation flow rate of 0.4 gpm ensures the user will receive hot water even in low demand situations, Up to 0.94 EF with stainless steel condensing heat exchanger
Family: Prestige
Bullet10: Digital display shows temperature setting and maintenance codes
Bullet11: 2-pipe direct vent system designed for PVC pipe (up to 38'' of 3'' PVC pipe or 5'' of 2'' PVC pipe)
Bullet12: Hot-start programming helps minimize fluctuation in water temperature, referred to as ''cold water sandwich'', during periods of frequent on/off operation
Bullet13: Exclusive! guardian OFW overheat film wrap
Bullet14: EZ-Link cable available for higher demand applications to connect two tankless units to operate as one
Bullet15: Manifold up to six units with an optional MIC-6 manifold control board
Bullet16: Manifold up to 20 units with the optional MIC-185 plus the MICS-180 manifold control assembly
Bullet17: High altitude capability - up to 8400'' elevation above sea level3
Bullet18: Digital remote control and 10'' of thermostat wire included
Bullet19: Supplied with a 120 V power cord (indoor models only)
Bullet20: Freeze protection to -30 deg F
Bullet21: EZ-Spec sizing software - advanced online tool that takes the guess work out of sizing tankless applications
Bullet5: Recirculation pump kit-ready - quickly pairs with our Recirculation pump kit to provide instantaneous hot water at the tap
Bullet6: Built-in condensate neutralizer
Bullet7: 1/2'' gas line compatibility on every model
Bullet8: Exclusive! maintenance notice setting alerts homeowner - flashing a warning code to call for service check
Bullet9: Self-diagnostic system for easy installation and service
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Extra Data: 120 VAC powered blower, 2-pipe system: 1 pipe pulls in outside air for combustion and the other exhausts combustion gases, New whisper quiet blower
Item Description
Solaraide tanks with multi-port connections are available as electric backup water heaters and as storage tanks for solar water heating systems.
Item ID: 80506MZ
Width:
Height:
Extra Data: Collector feed and return fittings conveniently located on front of tank for easy installation, Connection ports on the top, right and left side fit more installations and reduce SKUs, Electric backup model provides at least 40 gal of stored hot water, Two well insulated models to choose from a storage tank or a high-efficiency 4500 W backup electric water heater
Family: Solaraide
Bullet10: Temperature and pressure relief valve included Electric backup model has automatic temperature control and over heat
Bullet5: A special 1/2'' NPT opening is provided for installation of a probe type thermostat
Bullet6: Durable brass drain valve for easy maintenance
Bullet7: Cold water inlet brings cold water to tank bottom to prevent mixing with heated water
Bullet8: Rheemglas tank lining resists corrosion and prolongs tank life
Bullet9: Anode rod equalizes aggressive action for prolonged tank life
Item Description
Hot water supply heaters are designed for applications that require high inputs and large volumes of stored hot water. Rheem hot water supply heaters are designed to provide hot water service to a variety of commercial applications when used in conjunction with an appropriately sized storage tank. Choose from 82 percent thermal efficiency models that range from 136000-1826000 Btu/h and have maximum temperature setting of 180 deg F. Applications include outdoor installation and for use with or without a circulating pump.
Item ID: 804XCVN
Width:
Height:
Extra Data: Compact design - the low water heater mass design offers substantial savings in weight and cube over most cast iron, steel tube and storage type water heaters making it ideal for rooftop installations and in tight quarters, Energy saving pump control - the energy saving pump control is an electric device that allows the operator to set the desired time for the pump to run after the water heater shuts off, Reliable heat exchanger design - the all copper heat exchanger is a single bank, straight-through design with a floating return header immune to thermal shock, Spark-to-pilot (IID)- this system is standard on all models for minimal heat loss
Bullet5: Glass lined cast iron headers - these headers handle any aggressive water conditions
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053C8F
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
Rheem Prestige RTGH is a series of high efficiency condensing tankless gas water heaters designed for continuous hot water.
Item ID: 8053H3V
Width:
Height:
Extra Data: Exclusive! water savings setting upon activation, this setting can save homeowners up to 1100 gal of water per year by decreasing the flow of water through the pipes until the temperature reaches the heaters set temperature, Intelligent electronic controls designed to increase energy efficiency and safety, Low flow fixture compatible - industry first minimum flow rate of 0.26 gpm and minimum activation flow rate of 0.4 gpm ensures the user will receive hot water even in low demand situations, Up to 0.94 EF with stainless steel condensing heat exchanger
Family: Prestige
Bullet10: Digital display shows temperature setting and maintenance codes
Bullet11: 2-pipe direct vent system designed for PVC pipe (up to 38'' of 3'' PVC pipe or 5'' of 2'' PVC pipe)
Bullet12: Hot-start programming helps minimize fluctuation in water temperature, referred to as ''cold water sandwich'', during periods of frequent on/off operation
Bullet13: Exclusive! guardian OFW overheat film wrap
Bullet14: EZ-Link cable available for higher demand applications to connect two tankless units to operate as one
Bullet15: Manifold up to six units with an optional MIC-6 manifold control board
Bullet16: Manifold up to 20 units with the optional MIC-185 plus the MICS-180 manifold control assembly
Bullet17: High altitude capability - up to 8400'' elevation above sea level3
Bullet18: Digital remote control and 10'' of thermostat wire included
Bullet19: Supplied with a 120 V power cord (indoor models only)
Bullet20: Freeze protection to -30 deg F
Bullet21: EZ-Spec sizing software - advanced online tool that takes the guess work out of sizing tankless applications
Bullet5: Recirculation pump kit-ready - quickly pairs with our Recirculation pump kit to provide instantaneous hot water at the tap
Bullet6: Built-in condensate neutralizer
Bullet7: 1/2'' gas line compatibility on every model
Bullet8: Exclusive! maintenance notice setting alerts homeowner - flashing a warning code to call for service check
Bullet9: Self-diagnostic system for easy installation and service
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804X8XU
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Professional Classic Point-of-Use electric water heaters feature a space-saving design for installation in limited spaces.
Item ID: 80509JW
Width:
Height:
Extra Data: Automatic thermostat keeps water at desired temperature, High-efficiency heating element, Over-temperature protector cuts off power in excess temperature situations, Wall bracket for easy wall mount installations and corrosion-resistant 1/4 turn drain valve included with 2.5 gal model
Family: Professional Classic
Bullet5: Temperature and pressure relief valve
Bullet6: Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
Bullet7: Meets or exceeds National Appliance Energy Conservation Act (NAECA) requirements
Bullet8: These units are UL listed and comply with Underwriter''s Laboratories Specifications 174
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site