Item Description
Triton commercial gas water heaters are the most accurate, all-inclusive leak detection and prevention system in the market.
Item ID: 8053D67
Width:
Height:
Finish: Porcelain Enamel
Extra Data: EcoNet smart monitoring technology with integrated Wi-Fi - Rheem exclusive, provides performance updates and alerts via both mobile device and full-color LCD display, LeakSense - intelligent leak detection system detect leaks as small as a grain of sand and provides real-time notifications that warn you before catastrophic failure occurs, Preventive maintenance alerts - maintenance reminders help to extend life of the tank, Systematic health checks - ongoing self-monitoring of Triton''s most vital components and alerts of potential issues
collection: Triton
Bullet10: Advanced power anodes - self-adjusting, non-sacrificial power anodes provide systematic monitoring of anode health and remaining life
Bullet11: Full modulation - maximizes energy savings by optimizing Btu input for specific water heating demand
Bullet12: Scheduling capability - adjust to heat water only during peak operating hours when your business needs it most
Bullet13: Altitude certified up to 8999'' above sea level
Bullet14: CSA/ASME rated T and P valve
Bullet5: Built-in condensate neutralizer (Standard on both base and premium models) - reduces installation time as plumbers no longer need to install this component
Bullet6: Multiple connection points - multiple water connections at the top, side and bottom of the unit simplify installation for replacement of any model
Bullet7: Variety of flexible venting options including InnoFlue flex venting - polypropylene, PVC, CPVC, InnoFlue flex vent and ABS materials, venting 2'', 3'', 4 ''and 6'' diameters
Bullet8: Patented built-in condensate neutralizer - reduces water acidity for safe drainage
Bullet9: Triple pass heat exchanger - constructed with premium ASME-grade steel to minimize rust and corrosion for extended tank life and maximum thermal efficiency
Extra Data: Compact size fits almost anywhere; suitable for ADA compliant facilities, Digital LED display with accessible user interface communicates system status and heater operation feedback, Mounts in any orientation for a flexible installation, Silent operation on all models except for RTEH012240T
Bullet10: Control system activates heater only on demand
Bullet11: High temperature limit switch enables safe operation
Bullet12: Active energy management with power modulation allows for thermostatic accuracy
Bullet5: Only one input line, hot or cold, needed for an easy installation
Bullet6: Designed to deliver hot water to a single pipe faucet, mixing valves or mixing faucets
Bullet7: Integral 3/8'' compression fittings, no soldering or sweat connections required
Bullet8: No T and P relief valve needed (check local codes), ready to go, right out-of-the-box
Bullet9: Save water and time by installing unit at the point-of-use
Item Description
The PERFORMANCE atmospheric gas water heaters feature a diagnostic gas valve and a 6 years warranty.
Item ID: 8053J4F
Width:
Height:
Extra Data: Eco-friendly burner, low NOx design, Meets 40 ng/J NOx requirements, Recovery: up to 51 gph at a 90 deg F rise, depending on model, Self-powered diagnostic gas control valve for improved monitoring and service
collection: Performance
Bullet10: Temperature and pressure relief valve included
Bullet11: Low lead compliant
Bullet12: Standard replacement parts
Bullet5: Exclusive air/fuel shut-off device
Bullet6: Maintenance free - no filter to clean
Bullet7: Disables the heater in the presence of flammable vapor accumulation
Bullet8: Premium grade anode rod provides long-lasting tank protection
Extra Data: Our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence, The short heights and narrow jacket diameters, plus the top, front and rear water inlets/outlets offer the ultimate in installation flexibility, The tighter the commercial retrofit, the more you will appreciate how the universal''s compact size and multiple water connections simplify installations, choose from 80 percent thermal efficiency models that range from 98000-399900 Btu/hr and have, Universal''s proprietary steel formulation, patented multi-flue design, combined with two coats of porcelain enamel, results in a superior heat exchanger design
collection: Universal
Bullet10: Anode design utilizes multiple magnesium rods to ensure corrosion-resistance for a long tank life
Bullet5: Precision burners, raised port design, are formed from high chromium stainless steel, each burner assembly slides out like a drawer for quick inspection and maintenance
Bullet6: Low profile damper minimizes overall product height, heavy-duty vent hood supports are designed to withstand the rigors of installation
Bullet7: Factory installed brass drain valve allows for faster draining and servicing
Bullet8: Energy saving ignition that ignites pilot only when there is a call for heat
Bullet9: Up to 5000'' for natural gas and 2000'' for LP with high altitude certification kit, up to 8000''
Item Description
Triton commercial gas water heaters are the most accurate, all-inclusive leak detection and prevention system in the market.
Item ID: 8053C9P
Width:
Height:
Finish: Porcelain Enamel
Extra Data: EcoNet smart monitoring technology with integrated Wi-Fi - Rheem exclusive, provides performance updates and alerts via both mobile device and full-color LCD display, LeakSense - intelligent leak detection system detect leaks as small as a grain of sand and provides real-time notifications that warn you before catastrophic failure occurs, Preventive maintenance alerts - maintenance reminders help to extend life of the tank, Systematic health checks - ongoing self-monitoring of Triton''s most vital components and alerts of potential issues
collection: Triton
Bullet10: Advanced power anodes - self-adjusting, non-sacrificial power anodes provide systematic monitoring of anode health and remaining life
Bullet11: Full modulation - maximizes energy savings by optimizing Btu input for specific water heating demand
Bullet12: Scheduling capability - adjust to heat water only during peak operating hours when your business needs it most
Bullet13: Altitude certified up to 8999'' above sea level
Bullet14: CSA/ASME rated T and P valve
Bullet5: Built-in condensate neutralizer (Standard on both base and premium models) - reduces installation time as plumbers no longer need to install this component
Bullet6: Multiple connection points - multiple water connections at the top, side and bottom of the unit simplify installation for replacement of any model
Bullet7: Variety of flexible venting options including InnoFlue flex venting - polypropylene, PVC, CPVC, InnoFlue flex vent and ABS materials, venting 2'', 3'', 4 ''and 6'' diameters
Bullet8: Patented built-in condensate neutralizer - reduces water acidity for safe drainage
Bullet9: Triple pass heat exchanger - constructed with premium ASME-grade steel to minimize rust and corrosion for extended tank life and maximum thermal efficiency
Extra Data: Digital LED display communicates system status and heater operation feedback, Low flow activation at 0.3 GPM, Self-diagnostics with intelligent controls actively protect heater in installed environment, Silent operation on all models except for RTEH012240MV
Bullet10: No T and P relief valve needed (check local codes), ready to go, right out-of-the-box
Bullet11: Save water and time by installing unit at the point-of-use
Bullet12: Control system activates heater only on demand
Bullet13: High temperature limit switch enables safe operation
Bullet14: Active energy management with power modulation allows for thermostatic accuracy
Bullet5: Mounts in any orientation for a flexible installation
Bullet6: Compact size fits almost anywhere; suitable for ADA compliant facilities
Bullet7: Only one input line, hot or cold, needed for an easy installation
Bullet8: Designed to deliver hot water to a single pipe faucet or mixing faucets
Bullet9: Integral 3/8'' compression fittings, no soldering or sweat connections required
Item Description
Point-of-Use commercial electric line is designed to provide hot water at the consumption point, eliminating costly temperature loss in long piping runs.
Item ID: 80506P2
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Automatic temperature control, Efficient design, Long life heating elements, Long life tank design
Extra Data: Our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence, The short heights and narrow jacket diameters, plus the top, front and rear water inlets/outlets offer the ultimate in installation flexibility, The tighter the commercial retrofit, the more you will appreciate how the universal''s compact size and multiple water connections simplify installations, choose from 80 percent thermal efficiency models that range from 98000-399900 Btu/hr and have, Universal''s proprietary steel formulation, patented multi-flue design, combined with two coats of porcelain enamel, results in a superior heat exchanger design
collection: Universal Low Nox
Bullet10: Anode design utilizes multiple magnesium rods to ensure corrosion-resistance for a long tank life
Bullet5: Precision burners, raised port design, are formed from high chromium stainless steel, each burner assembly slides out like a drawer for quick inspection and maintenance
Bullet6: Low profile damper minimizes overall product height, heavy-duty vent hood supports are designed to withstand the rigors of installation
Bullet7: Factory installed brass drain valve allows for faster draining and servicing
Bullet8: Energy saving ignition that ignites pilot only when there is a call for heat
Bullet9: Up to 5000'' for natural gas and 2000'' for LP with high altitude certification kit, up to 8000''
Item Description
Professional Classic atmospheric gas water heaters are engineered for more hot water at a low operating cost.
Item ID: 8050CKE
Width:
Height:
Extra Data: Exclusive air/fuel shut-off device, Maintenance free - no filter to clean, More hot water at a low operating cost, Recovery: 30.3-40.4 gph at a 90 deg F rise, depending on model
collection: Professional Classic
Bullet10: Easy to light - no matches required
Bullet11: EverKleen patented system fights sediment build-up
Bullet12: Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
Bullet13: Enhanced flow brass drain valve
Bullet14: Factory installed temperature and pressure relief valve on select models
Bullet15: Low lead compliant
Bullet16: Standard replacement parts
Bullet5: Protective control system that disables the heater in the presence of flammable vapor accumulation
Bullet6: Eco-friendly burner, low NOx design
Bullet7: Meets 40 ng/J NOx requirements
Bullet8: Premium grade anode rod provides long-lasting tank protection
Bullet9: All models certified up to 5999'' above sea level, some certified up to 10000''
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053C96
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804X60H
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Extra Data: Compact size fits almost anywhere; suitable for ADA compliant facilities, Low flow activation at 0.25 GPM (model dependent), Mounts in any orientation for a flexible installation, Only one cold water line needed for an easy installation
Bullet5: No T and P relief valve needed (check local codes), ready to go, right out-of-the-box
Bullet6: Save water and time by installing unit at the point-of-use
Bullet7: Integral 3/8'' compression fittings, no soldering or sweat connections required
Bullet8: Control system activates heater only on demand
Bullet9: High temperature limit switch enables safe operation
Item Description
Table top water heaters are a good choice when installations are in kitchens or other work areas that require additional counter space.
Item ID: 8053F6M
Width:
Height:
Extra Data: 4'' high back splash protects interior wall from spills and stains, Baked enamel counter top is acid and heat resistant, Channel at rear accommodates piping and permits water heater to fit snugly against back wall, Recessed base provides comfortable standing area while working
Bullet5: More hot water at a low operating cost
Bullet6: Durable direct immersion resistored heating element
Item Description
PERFORMANCE direct vent gas water heaters are certified for manufactured housing (HUD) and modular construction.
Item ID: 8053J4Q
Width:
Height:
Extra Data: FHR: 60 gal for 40 gal model and 50 gal for 30 gal model, Fights sediment and mineral build-up, Recovery: 30.3 gph at a 90 deg F rise, Reduces fuel costs flexibility
collection: Performance
Bullet10: Piezo ignition easy light pilot
Bullet11: Factory installed temperature and pressure relief valve - side location
Bullet12: Low lead compliant
Bullet5: Field convertible controls for natural gas or LP operation included
Bullet6: No external door is required
Bullet7: Hot water outlet located at top
Bullet8: Cold water inlet at side for fast, economical hook-up
Bullet9: Premium grade anode rod provides long-lasting tank protection
Item Description
Heavy-duty electric commercial water heaters are available in 50 through 175 gal capacities. All models quick ship from Rheem warehouses no deposit required.
Item ID: 804XCW4
Width:
Height:
Extra Data: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 15 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet5: Choose 3, 6, 9 or 12 element models for your specific application
Bullet6: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet7: Long life tank design: proprietary steel formulation with high temperature porcelain enamel to maximize corrosion-resistance resulting in a superior tank design
Bullet8: Two anode rods are installed to ensure long life and corrosion-resistance
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053C8P
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
Electric boosters are designed to fit under counters and deliver sanitizing rinse water for all stationary rack and conveyor type commercial dishwashers. Our 10 gal electric booster will raise preheated or cold water to 180 deg F rinse temperature for compliance with UL sanitation (NSF5) and all federal, state, county and local health department sanitation codes. In addition, these models can be used as circulating tank commercial electric water heaters for gravity or pump circulation to an auxiliary storage tank.
Item ID: 804X615
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Integral fusing - all models have integral fusing for each element, Long life heating elements - separate screw-in type elements feature a Nichrome wire filament, embedded in magnesium oxide sealed in a copper tube to resist water chemical corrosion, for long element life and a long life performance, elements are directly, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance resulting in a superior tank design, System sentinel - all electric booster models employ an element diagnostic panel, utilizing light emitting diodes (LED), corresponding to the number and location of each heating element. LED''s are energized when the electric elements are operating
Bullet10: All units are furnished with a fused 120 V control circuit, all controls (thermostats, high temperature limit, etc.) are operated off of this basic 120 V control circuit, this circuit is created by an internal multi-tap transformer of unique design that ha
Bullet5: Anode rods - (2) magnesium anodes are installed in each tank for maximum corrosion-resistance
Bullet6: AGA/ASME rated T and P valve - factory installed relief valve
Bullet7: Electrical connections - pre-wired, accessible control box with multiple knock-outs on side in size selections to match the National Electric Code, sizes range from 1/2''-2'', a grounding screw is provided for attaching an equipment groundi
Bullet8: Single panel control box - it comes with hinged stainless steel door that provides immediate access to all electrical components and elements
Bullet9: Terminal block - all models are equipped with UL listed terminal blocks for simplicity of installation, the terminal block will accept either copper or aluminum field connect wire
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site