Item Description
The PERFORMANCE PLATINUM atmospheric gas water heaters feature a diagnostic gas valve and a 12 years warranty.
Item ID: 8053J3J
Width:
Height:
Extra Data: Eco-friendly burner, low NOx design, FHR: 94 gal, Recovery: 51 gph at a 90 deg F rise, Self-powered diagnostic gas control valve for improved monitoring and service
collection: Performance Platinum
Bullet10: Enhanced flow brass drain valve
Bullet11: Easy to light - no matches required
Bullet12: Temperature and pressure relief valve included
Bullet13: Low lead compliant
Bullet14: Standard replacement parts
Bullet5: Meets 40 ng/J NOx requirements
Bullet6: Exclusive air/fuel shut-off device
Bullet7: Maintenance free - no filter to clean
Bullet8: Disables the heater in the presence of flammable vapor accumulation
Bullet9: Premium grade anode rod provides long-lasting tank protection
Item Description
Point-of-Use commercial electric line is designed to provide hot water at the consumption point, eliminating costly temperature loss in long piping runs.
Item ID: 805398C
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Automatic temperature control, Efficient design, Long life heating elements, Long life tank design
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Bullet9: Two anode rods are installed to ensure long life and corrosion-resistance
Item Description
Point-of-Use commercial electric line is designed to provide hot water at the consumption point, eliminating costly temperature loss in long piping runs.
Item ID: 804X5Y6
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Automatic temperature control, Efficient design, Long life heating elements, Long life tank design
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 8050GEF
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053H4R
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
Point-of-Use commercial electric line is designed to provide hot water at the consumption point, eliminating costly temperature loss in long piping runs.
Item ID: 804X51K
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Automatic temperature control, Efficient design, Long life heating elements, Long life tank design
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 8050FHU
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Extra Data: Exclusive Rheemglas tank lining resists corrosion, Gas master burner with precision port alignment for even heat transfer, Heat saving flue baffle design, R-foam insulation for superior heat retention
collection: Ferry
Bullet5: Model specific burners engineered for high MJ/H input
Bullet6: LP models feature durable stainless steel burners designed specifically for LP gas
Item Description
Point-of-Use commercial electric line is designed to provide hot water at the consumption point, eliminating costly temperature loss in long piping runs.
Item ID: 804X512
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Automatic temperature control, Efficient design, Long life heating elements, Long life tank design
Extra Data: Our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence, The short heights and narrow jacket diameters, plus the top, front and rear water inlets/outlets offer the ultimate in installation flexibility, The tighter the commercial retrofit, the more you will appreciate how the universal''s compact size and multiple water connections simplify installations, choose from 80 percent thermal efficiency models that range from 98000-399900 Btu/hr and have, Universal''s proprietary steel formulation, patented multi-flue design, combined with two coats of porcelain enamel, results in a superior heat exchanger design
collection: Universal Low Nox
Bullet10: Anode design utilizes multiple magnesium rods to ensure corrosion-resistance for a long tank life
Bullet5: Precision burners, raised port design, are formed from high chromium stainless steel, each burner assembly slides out like a drawer for quick inspection and maintenance
Bullet6: Low profile damper minimizes overall product height, heavy-duty vent hood supports are designed to withstand the rigors of installation
Bullet7: Factory installed brass drain valve allows for faster draining and servicing
Bullet8: Energy saving ignition that ignites pilot only when there is a call for heat
Bullet9: Up to 5000'' for natural gas and 2000'' for LP with high altitude certification kit, up to 8000''
Item Description
Triton commercial gas water heaters are the most accurate, all-inclusive leak detection and prevention system in the market.
Item ID: 8056A0L
Width:
Height:
Finish: Porcelain Enamel
Extra Data: EcoNet smart monitoring technology with integrated Wi-Fi - Rheem exclusive, provides performance updates and alerts via both mobile device and full-color LCD display, LeakSense - intelligent leak detection system detect leaks as small as a grain of sand and provides real-time notifications that warn you before catastrophic failure occurs, Preventive maintenance alerts - maintenance reminders help to extend life of the tank, Systematic health checks - ongoing self-monitoring of Triton''s most vital components and alerts of potential issues
collection: Triton
Bullet10: Advanced power anodes - self-adjusting, non-sacrificial power anodes provide systematic monitoring of anode health and remaining life
Bullet11: Full modulation - maximizes energy savings by optimizing Btu input for specific water heating demand
Bullet12: Scheduling capability - adjust to heat water only during peak operating hours when your business needs it most
Bullet13: Altitude certified up to 8999'' above sea level
Bullet14: CSA/ASME rated T and P valve
Bullet5: Built-in condensate neutralizer (Standard on both base and premium models) - reduces installation time as plumbers no longer need to install this component
Bullet6: Multiple connection points - multiple water connections at the top, side and bottom of the unit simplify installation for replacement of any model
Bullet7: Variety of flexible venting options including InnoFlue flex venting - polypropylene, PVC, CPVC, InnoFlue flex vent and ABS materials, venting 2'', 3'', 4 ''and 6'' diameters
Bullet8: Patented built-in condensate neutralizer - reduces water acidity for safe drainage
Bullet9: Triple pass heat exchanger - constructed with premium ASME-grade steel to minimize rust and corrosion for extended tank life and maximum thermal efficiency
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 8050FHA
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Extra Data: Brass drain valve, Collector feed and return fittings located at front of tank for convenient installation, Isolated tank design for better heat retention, Temperature and pressure relief valve included
collection: Solaraide He
Bullet10: Cold water inlet, hot water outlet, relief valve and anode rod at top of tank for easy access and fast, economical installation
Bullet11: Automatic temperature control
Bullet5: High-efficiency heating element
Bullet6: Rheemglas tank lining resists corrosion and prolongs tank life
Bullet7: Heat exchanger: copper tubing wrapped around and secured to the tank. Double wall, vented design for positive leak detection
Bullet8: Cold water inlet brings cold water to tank bottom to prevent mixing with heated water
Bullet9: Anode rod equalizes aggressive water action for prolonged tank life
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804XETC
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Solaraide tanks with multi-port connections are available as electric backup water heaters and as storage tanks for solar water heating systems.
Item ID: 8053J40
Width:
Height:
Extra Data: Collector feed and return fittings conveniently located on front of tank for easy installation, Connection ports on the top, right and left side fit more installations and reduce SKUs, Electric backup model provides at least 40 gal of stored hot water, Two well insulated models to choose from a storage tank or a high-efficiency 4500 W backup electric water heater
collection: Solaraide
Bullet10: Temperature and pressure relief valve included Electric backup model has automatic temperature control and over heat
Bullet5: A special 1/2'' NPT opening is provided for installation of a probe type thermostat
Bullet6: Durable brass drain valve for easy maintenance
Bullet7: Cold water inlet brings cold water to tank bottom to prevent mixing with heated water
Bullet8: Rheemglas tank lining resists corrosion and prolongs tank life
Bullet9: Anode rod equalizes aggressive action for prolonged tank life
Extra Data: Our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence, The short heights and narrow jacket diameters, plus the top, front and rear water inlets/outlets offer the ultimate in installation flexibility, The tighter the commercial retrofit, the more you will appreciate how the universal''s compact size and multiple water connections simplify installations, choose from 80 percent thermal efficiency models that range from 98000-399900 Btu/hr and have, Universal''s proprietary steel formulation, patented multi-flue design, combined with two coats of porcelain enamel, results in a superior heat exchanger design
collection: Universal Low Nox
Bullet10: Anode design utilizes multiple magnesium rods to ensure corrosion-resistance for a long tank life
Bullet5: Precision burners, raised port design, are formed from high chromium stainless steel, each burner assembly slides out like a drawer for quick inspection and maintenance
Bullet6: Low profile damper minimizes overall product height, heavy-duty vent hood supports are designed to withstand the rigors of installation
Bullet7: Factory installed brass drain valve allows for faster draining and servicing
Bullet8: Energy saving ignition that ignites pilot only when there is a call for heat
Bullet9: Up to 5000'' for natural gas and 2000'' for LP with high altitude certification kit, up to 8000''
Item Description
PERFORMANCE electric water heaters feature dual copper heating elements and a 6 years warranty.
Item ID: 80569YE
Width:
Height:
Extra Data: Electric junction box located above heating elements for easy installation, Over-temperature protector cuts off power in excess temperature situations, Premium grade anode rod provides long-lasting tank protection features
Item Description
Point-of-Use commercial electric line is designed to provide hot water at the consumption point, eliminating costly temperature loss in long piping runs.
Item ID: 804X502
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Automatic temperature control, Efficient design, Long life heating elements, Long life tank design
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8056AXC
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053F64
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing