Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Professional Classic direct vent gas water heaters use outside air for combustion, offer longer venting options and a coaxial vent for easy installation.
Item ID: 8053A8K
Width:
Height:
Extra Data: Adjustable coaxial vent allows flexibility of installation, can swivel 360 deg and uses outside air for combustion and requires no electrical power, Aluminum vent and cap base to prevent staining of building exterior, FHR: 78 gal for 50 gal model and 66 gal for 40 gal model, Recovery: 30.3-36.4 gph at a 90 deg F rise, depending on model
Family: Professional Classic
Bullet10: Premium grade anode rod provides long-lasting tank protection
Bullet11: Enhanced flow brass drain valve
Bullet12: Temperature and pressure relief valve included
Bullet13: Low lead compliant
Bullet14: Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
Bullet5: Longer venting options available, see chart on reverse
Bullet6: Exclusive air/fuel shut-off device
Bullet7: Maintenance free - no filter to clean
Bullet8: Disables the heater in the presence of flammable vapor accumulation
Item Description
PERFORMANCE electric water heaters feature dual copper heating elements and a 6 years warranty.
Item ID: 8053J54
Width:
Height:
Extra Data: Electric junction box located above heating elements for easy installation, Over-temperature protector cuts off power in excess temperature situations, Premium grade anode rod provides long-lasting tank protection features
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804XDTE
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Delivers 90 to 190 deg F water, Installs close to fixtures, eliminating the wait for hot water, Lifeguard heating elements - resist corrosion and burnout, separate screw-in type elements feature a stainless steel outer sheath of Incoloy 840, which surrounds the Nichrome wire filament, Long life ASME tank design - proprietary steel formulation with high temperature porcelain enamel maximizes corrosion-resistance
Bullet5: Immersion thermostat
Bullet6: Water connections - hot outlet and cold inlet are 3/4'' NPT plastic lined nipples which prevent excessive turbulence of heated water and results in optimum tank draw
Extra Data: Adjust water temperature track energy usage and set vacation mode all from your mobile device with built-in EcoNet Wi-Fi technology, ProTerra hybrid pulls heat from the air around it to heat water, reducing energy consumption, Uses up to 75 percent less energy than a standard electric water heater to help minimize your impact on the environment, View weekly, monthly and yearly energy usage reports from any mobile device to help better manage energy consumption
Family: Professional Prestige Proterra
Bullet10: With a zero clearance requirement, ProTerra hybrid fits in small spaces, even in closets
Bullet11: All serviceable parts and condensate line are on the front of the unit, making service easy
Bullet12: Self-cleaning reduces sediment buildup to prolong tank life and maintains the water heater''s efficiency and tank capacity
Bullet5: Diagnostic system control can be replaced without draining the water heater
Bullet6: Schedule set point adjustments and choose from 5 operating modes - energy saver, heat pump, electric, high demand, vacation - to fit your lifestyle
Bullet7: Quietest operation with a 49 dBA, operates just above a whisper so you won''t even notice it''s on
Bullet8: Enjoy plenty of hot water for the entire family with up to an 87 gal first hour delivery
Bullet9: Easy replacement with the same dimensions as a standard electric water heater
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Bullet9: Two anode rods are installed to ensure long life and corrosion-resistance
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Bullet9: Two anode rods are installed to ensure long life and corrosion-resistance
Item Description
Table top water heaters are a good choice when installations are in kitchens or other work areas that require additional counter space.
Item ID: 804X9VG
Width:
Height:
Extra Data: 4'' high back splash protects interior wall from spills and stains, Baked enamel counter top is acid and heat resistant, Channel at rear accommodates piping and permits water heater to fit snugly against back wall, Recessed base provides comfortable standing area while working
Bullet5: More hot water at a low operating cost
Bullet6: Durable direct immersion resistored heating element
Item Description
Professional Classic atmospheric gas water heaters are engineered for more hot water at a low operating cost.
Item ID: 8050DHD
Width:
Height:
Extra Data: Exclusive air/fuel shut-off device, Maintenance free - no filter to clean, More hot water at a low operating cost, Recovery: 30.3-40.4 gph at a 90 deg F rise, depending on model
Family: Professional Classic
Bullet10: Easy to light - no matches required
Bullet11: EverKleen patented system fights sediment build-up
Bullet12: Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
Bullet13: Enhanced flow brass drain valve
Bullet14: Factory installed temperature and pressure relief valve on select models
Bullet15: Low lead compliant
Bullet16: Standard replacement parts
Bullet5: Protective control system that disables the heater in the presence of flammable vapor accumulation
Bullet6: Eco-friendly burner, low NOx design
Bullet7: Meets 40 ng/J NOx requirements
Bullet8: Premium grade anode rod provides long-lasting tank protection
Bullet9: All models certified up to 5999'' above sea level, some certified up to 10000''
Item Description
Rheem RTG is a series of ultra low NOx, mid-efficiency tankless gas water heaters designed for continuous hot water.
Item ID: 8053A9C
Width:
Height:
Extra Data: EcoNet enabled - all tankless products from 2010 to present can connect to EcoNet mobile app via tankless EcoNet accessory kit (REWRA630TWH), Exclusive! water savings setting - upon activation, this setting can save homeowners up to 1100 gal of water per year by reducing flow at the tap until set temperature is achieved (optional), Industry best! low flow activation - minimum flow rate of o.26 gpm and minimum activation flow rate of 0.4 gpm ensures the user will receive hot water even in low demand situations, Recirculation pump kit - ready providing faster hot water at the tap and savings of up to 12000 gal water/year
Bullet5: Digital remote control and 10'' of thermostat wire included
Bullet6: Requires 120 V power supply (indoor models only)
Bullet7: Industry best! freeze protection to -30 deg F
Bullet8: Maximum water temperature is 140 deg F, for higher temperature applications, upgrade kits are available
Extra Data: Compact size fits almost anywhere; suitable for ADA compliant facilities, Digital LED display with accessible user interface communicates system status and heater operation feedback, Mounts in any orientation for a flexible installation, Silent operation on all models except for RTEH012240T
Bullet10: Control system activates heater only on demand
Bullet11: High temperature limit switch enables safe operation
Bullet12: Active energy management with power modulation allows for thermostatic accuracy
Bullet5: Only one input line, hot or cold, needed for an easy installation
Bullet6: Designed to deliver hot water to a single pipe faucet, mixing valves or mixing faucets
Bullet7: Integral 3/8'' compression fittings, no soldering or sweat connections required
Bullet8: No T and P relief valve needed (check local codes), ready to go, right out-of-the-box
Bullet9: Save water and time by installing unit at the point-of-use
Extra Data: Exclusive Rheemglas tank lining resists corrosion, Gas master burner with precision port alignment for even heat transfer, Heat saving flue baffle design, R-foam insulation for superior heat retention
Family: Ferry
Bullet5: Model specific burners engineered for high MJ/H input
Bullet6: LP models feature durable stainless steel burners designed specifically for LP gas
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804X8YR
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Professional Classic atmospheric gas water heaters are engineered for more hot water at a low operating cost.
Item ID: 8050CKH
Width:
Height:
Extra Data: Exclusive air/fuel shut-off device, Maintenance free - no filter to clean, More hot water at a low operating cost, Recovery: 30.3-40.4 gph at a 90 deg F rise, depending on model
Family: Professional Classic
Bullet10: Easy to light - no matches required
Bullet11: EverKleen patented system fights sediment build-up
Bullet12: Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
Bullet13: Enhanced flow brass drain valve
Bullet14: Factory installed temperature and pressure relief valve on select models
Bullet15: Low lead compliant
Bullet16: Standard replacement parts
Bullet5: Protective control system that disables the heater in the presence of flammable vapor accumulation
Bullet6: Eco-friendly burner, low NOx design
Bullet7: Meets 40 ng/J NOx requirements
Bullet8: Premium grade anode rod provides long-lasting tank protection
Bullet9: All models certified up to 5999'' above sea level, some certified up to 10000''
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Bullet9: Two anode rods are installed to ensure long life and corrosion-resistance
Extra Data: Compact size fits almost anywhere; suitable for ADA compliant facilities, Low flow activation at 0.25 GPM (model dependent), Mounts in any orientation for a flexible installation, Only one cold water line needed for an easy installation
Bullet5: No T and P relief valve needed (check local codes), ready to go, right out-of-the-box
Bullet6: Save water and time by installing unit at the point-of-use
Bullet7: Integral 3/8'' compression fittings, no soldering or sweat connections required
Bullet8: Control system activates heater only on demand
Bullet9: High temperature limit switch enables safe operation
Item Description
Eclipse non-metallic electric commercial water heaters are durable, lightweight, and offer an exclusive 10 years limited warranty.
Item ID: 804XDUJ
Width:
Height:
Extra Data: High density polyethylene dent and scratch-resistant jacket, Input options: 12.4, 18 or 24 kW, Non-metallic, lightweight composite tank - no anode rod required, System Sentinel LED indicators are provided for each element to show when power is on
Family: Eclipse
Bullet5: Voltage options: 208, 240, or 480 VAC in either 1 ph or 3 ph (277 VAC in 1 ph only)
Bullet6: Element wattages: 3100, 4500 or 6000 in each of the 4 voltages
Bullet7: The elements are low watt density design (46, 67, 90 W/sq-in) with titanium sheath for superior protection
Bullet8: Power control circuits use two surface mounted thermostats and operate in two stages - lower control is for the lower two elements, which provides recovery for most needs, - upper control is for the upper two elements, which operates during high demands