Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve features an EPDM encapsulated ductile iron disc. The internal stem/disc splined drive design eliminates the need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HN0GM
Width:
Height:
Extra Data: EPDM encapsulated ductile iron disc, Splined drive, Stainless steel stem with metal bushings, Valve pressure rating 300 psi wwp
AltImageName1: /NBC/GD47653;GD4765-5.jpg
AltImageName2: /NBC/GD47653;GD4765-5.jpg
AltImagePath1: /NBC-GD47653;GD4765-5.JPEG
AltImagePath2: /NBC-GD47653;GD4765-5.JPEG
Bullet10: MSS SP-25 (markings)
Bullet5: Extended neck for up to 2” of insulation
Bullet6: Operating mechanism: bare stem, lever lock and manual gear operator
Bullet7: Not recommended for steam service
Bullet8: NSF/ANSI/CAN-61 and 372
Bullet9: Designed to meet MSS SP-67
Country: USA
Description: The NIBCO grooved end NSF third party certified butterfly valve provides bubble-tight shutoff at 300psi. Grooved ends are compatible with IPS pipe. These valves are ideal in grooved steel pipe systems for commercial and some light industrial process applic
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO® Press System® fittings are the fastest, easiest way to join copper tubing systems in residential and commercial potable, hot, chilled and process water applications for plumbing and HVAC systems. The press fittings can also be installed underground. The NIBCO® Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO® Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® Press System® copper fittings are backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706URTM
Width:
Height:
Extra Data: Dezincification resistant, Lead-free*, Operating pressure 200 psi cwp, Temperature range -20°F to 250°F
Bullet5: ASTM B75 Alloy C12200 Copper
Bullet6: NSF/ANSI/CAN-61
Bullet7: Third party certified to UPC
Bullet8: Third party certified to the performance requirements of CSA MSE 13 and PS-117
Country: USA
Description: The NIBCO Press System copper 90-degree male threaded elbow features an inboard bead and EPDM O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, watertight seal in seconds with no flame, solder or flu
Item Description
The NIBCO® bronze check valve features solder end connections for ease of installation. Swing check valves may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8QVT
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 366°F/185°C, 300 psi/20.7 bar non-shock cold working pressure, Renewable bronze disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 150 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-80
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. It features a screw-in bonnet for accessibility to repair or
Height: 1.950
Length: 4.060
Made to Order: MTO
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO® FLO-BOSS® Automatic Balancing Valves are constructed with dezincification resistant materials. This unique valve design provides finite control through a wide range of flow cartridges. Please refer to NIBCO technical data sheets and IOM Manuals for engineering and installation information. Whether a system is designed for heating, cooling or water distribution, it must be properly adjusted and balanced for optimum performance. A balanced system ensures a comfortable indoor climate. Choose NIBCO® Coil-Connect® valves, fittings and accessories for the most specified, versatile and economical option in commercial HVAC and mechanical applications. NIBCO® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HQW99
Width:
Height:
Extra Data: 300 psi non-shock cold working pressure, DZR Brass body and tail pieces, Maximum temperature rating 260°F at 150 psi, Regulating cartridge DZR Brass and Stainless Steel
AltImageName1: /NBC/T1880SO.jpg
AltImageName2: /NBC/T1880SO.jpg
AltImagePath1: /NBC-T1880SO.JPEG
AltImagePath2: /NBC-T1880SO.JPEG
Bullet5: EPDM O-rings
Bullet6: NPT Threaded Ends
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: FLO-BOSS® AI
Country: USA
Description: NIBCO FLO-BOSS Automatic Balancing Valves are ideally suited for use in HVAC and other mechanical applications that require a balanced system providing optimum flow. Each valve has 2 integral drilled and tapped ports with PT ports installed, has double uni
Height: 2.910
Length: 13.190
MadeInUSA: Yes
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze check valve features threaded end connections for ease of installation. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCXER
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 366°F/185°C, 300 psi/20.7 bar non-shock cold working pressure, Renewable bronze disc, Y-pattern
AltImageName1: /NBC/T433Y.jpg
AltImageName2: /NBC/T433Y.jpg
AltImagePath1: /NBC-T433Y.JPEG
AltImagePath2: /NBC-T433Y.JPEG
Bullet5: Regrindable seat
Bullet6: Class 150 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-80
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. It features a screw-in bonnet for accessibility to repair or
Height: 2.460
Length: 4.500
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® swing check valve features a screw-in bonnet for accessibility to repair or replace parts. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8PY8
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Renewable bronze disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 125 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-80
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. The bronze check valve features solder end connections for ea
Height: 2.180
Length: 4.690
Made to Order: MTO
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® check valve features a screw-in bonnet for accessibility to repair or replace parts. Swing check valves may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8QV2
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Renewable PTFE disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 125 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-139
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. The bronze check valve features solder end connections for ea
Height: 2.180
Length: 4.690
Made to Order: MTO
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site