Extra Data: Copper-to-copper connections, Full port, Maximum service temperature 250 Degrees F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Multiple handle options, including NIB-Seal®
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC. Performance Bronze pecent is a registered trademark of NIBCO INC.
Height: 2.950
Length: 10.45
MadeInUSA: Yes
Material: Lead-Free Bronze
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® Press System is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. The lead free HydraPure® Performance Bronze® ball valve is specifically designed for use in systems that deliver water for human consumption. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO® Press System features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. NIBCO® Press System valves are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707KY8H
Width:
Height:
Extra Data: Bronze trim blowout-proof stem, Full port, Maximum service temperature 250°F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Lead-free*
Bullet11: Conforms to MSS SP-110
Bullet12: NSF/ANSI/CAN-61
Bullet13: NSF/ANSI/CAN-372
Bullet14: IAPMO/ANSI Z1157
Bullet5: Reinforced PTFE seat rings
Bullet6: Threaded x press female end connections
Bullet7: Press leak-detection feature
Bullet8: Multiple handle options, including NIB-Seal®
Bullet9: Dezincification resistant
Country: USA
Description: The NIBCO Press System ball valve body is manufactured from lead free* HydraPure Performance Bronze alloy and is dezincification resistant. The ball valve is designed with threaded by press-to-connect copper end connections with an inboard bead and EPDM O-
Height: 3.690
Length: 11.160
Low Lead: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Y-strainers are installed upstream to protect valves, regulators, and meters, etc., from rust, pipe scale and dirt. The strainer is a ''''Y'''' type with a branch angled off the flow path. It features a tapped cap with blow-off plug for screen maintenance. The NIBCO Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. NIBCO Press System® valves are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707KX6J
Width:
Height:
Extra Data: Maximum service temperature 250°F, Perforated stainless steel screen, Tapped cap with plug, Valve pressure rating 200 psi/13.8 bar non shock cold working pressure
Bullet5: Class 125
Bullet6: Press x press female end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-110
Country: USA
Description: The NIBCO Press System bronze Y-strainer features press x press female end connections with an inboard bead and EPDM O-rings for quick and easy joinery to the piping system. Simply applying pressure from a press-fit tool tightens the O-ring onto the tube,
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The bronze check valve features solder end connections for ease of installation. It features a screw-in bonnet for accessibility to repair or replace parts. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8QVC
Width:
Height:
Extra Data: 200 psi/13.8 bar non-shock cold working pressure, Regrindable seat, Renewable Buna-N disc, Y-pattern
AltImageName1: /NBC/S413Y.jpg
AltImageName2: /NBC/S413Y.jpg
AltImagePath1: /NBC-S413Y.JPEG
AltImagePath2: /NBC-S413Y.JPEG
Bullet5: Class 125 solder end connections
Bullet6: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet7: Conforms to MSS SP-80
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. With the Buna-N seat disc, the check valve is recommended for
Height: 2.410
Length: 5.280
Made to Order: MTO
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. The complete near boiler piping kits are fully-fabricated solutions that are catered to the needs of their chosen boiler. Using the Webstone boiler compatibility matrix, the installer is provided with the NBP kit part number that''''s unique to their boiler model, with pre-cut supply and return lines and boiler-specific connections. Designed for use with water, oil, glycol mix in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079T8Y
Width:
Height:
Extra Data: Assembled with Flexible Stainless Steel Tubing, Insulated Manifold, Supply and Return Line, Integrated Connections for Your Specific Boiler, Tubing May be Cut for Installations in Close Quarters
Bullet10: Available in FIP, SWT, PRS x FIP, FIP x SWT, PRS x SWT
Bullet11: Certified to NSF/ANSI 61
Bullet5: Female Threaded Plugged Port for Connection to Other Devices
Bullet6: 1/4 Inch Pressure Gauge Port
Bullet7: Saves 261 Minutes
Bullet8: Replaces 34 Components
Bullet9: Eliminates 29 Leakpaths
Country: China
Description: Hydro-Core Complete Near Boiler Piping Kit, Includes Manifold, Supply and Return Lines and Boiler Connections for Select Wall Hung Boilers
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. The complete near boiler piping kits are fully-fabricated solutions that are catered to the needs of their chosen boiler. Using the Webstone boiler compatibility matrix, the installer is provided with the NBP kit part number that''''s unique to their boiler model, with pre-cut supply and return lines and boiler-specific connections. Designed for use with water, oil, glycol mix in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7076ZE8
Width:
Height:
Extra Data: Assembled with Flexible Stainless Steel Tubing, Insulated Manifold, Supply and Return Line, Integrated Connections for Your Specific Boiler, Tubing May be Cut for Installations in Close Quarters
Bullet10: Available in FIP, SWT, PRS x FIP, FIP x SWT, PRS x SWT
Bullet11: Certified to NSF/ANSI 61
Bullet5: Female Threaded Plugged Port for Connection to Other Devices
Bullet6: 1/4 Inch Pressure Gauge Port
Bullet7: Saves 261 Minutes
Bullet8: Replaces 34 Components
Bullet9: Eliminates 29 Leakpaths
Country: China
Description: Hydro-Core Complete Near Boiler Piping Kit, Includes Manifold, Supply and Return Lines and Boiler Connections for Select Wall Hung Boilers
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Pressing tools, jaws and chain sets are an integral part of ensuring a reliable, permanent connection between copper piping and NIBCO Press System® fittings and valves. Use only pressing tools, jaws and chain sets that have been tested and approved for use with NIBCO Press System® fittings and valves. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains.
Item ID: 70HXZL1
Width:
Height:
Extra Data: Creates leak-free connections, No flame, solder or flux, Use with PC-280 or PC-100 press tools
AltImageName1: /NBC/PRESSJAWLARGE.jpg
AltImageName2: /NBC/PRESSJAWLARGE.jpg
AltImagePath1: /NBC-PRESSJAWLARGE.JPEG
AltImagePath2: /NBC-PRESSJAWLARGE.JPEG
Country: Germany
Description: The NIBCO Press System press jaw kit contains two jaws ranging in size from 1-1/2-inch to 2 inches in a heavy-duty case, intended for use with the PC-280 press tool or the PC-100 press tool. The pressing jaw is installed in the appropriate pressing tool. W
Disclaimer: NIBCO Press System pecent is a registered trademark of NIBCO INC.
Item Description
The NIBCO® Press System® check valve features a screw-in bonnet for accessibility to repair or replace parts. Swing check valves may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. The NIBCO® Press System® is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. The lead free HydraPure™ Performance Bronze™ ball valve is specifically designed for use in systems that deliver water for human consumption. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System® applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO® Press System® features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. NIBCO® Press System® valves are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707KX78
Width:
Height:
Extra Data: Regrinding type, Renewable seat and disc, Valve pressure rating 200 psi/13.8 bar non-shock cold working pressure, Y-pattern
Bullet5: NIBCO® double-oval lead-free body marking
Bullet6: Lead-free*
Bullet7: Dimensions and workmanship conform to MSS SP-80
Bullet8: NSF/ANSI/CAN-61 and 372
Country: USA
Description: The NIBCO Press System horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. The check valve features press end connections for ease
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC.
Height: 2.760
Length: 7.770
Low Lead: Yes
MadeInUSA: Yes
Material: Lead-Free Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO PEX Home Run Manifold features 8 ports, and is designed for use with NIBCO PEX tubing in residential potable water and radiant heating systems. Also available with no trunk joints (PH8-A) and valve outlets PH8-V1 or PH8-V2).
Item ID: 70HV6Q7
Width:
Height:
Extra Data: Lead-Free, Maximum service temperature 200 degrees F, NSF-14, NSF/ANSI/CAN-61
AltImageName1: /NBC/PH8.jpg
AltImageName2: /NBC/PH8.jpg
AltImagePath1: /NBC-PH8.JPEG
AltImagePath2: /NBC-PH8.JPEG
Bullet5: Complies with ASTM F877
Bullet6: Compatible with ICC
Bullet7: CSA (on valves)
Country: USA
Description: 8-Port Home Run Manifold pecent
Disclaimer: Home Run Manifold pecent is a registered trademark of NIBCO INC.
Extra Data: Full port, Max temperature rating 300 degrees F, Silicon Performance Bronze® body, ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Lead-free
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet7: NIBCO® HydraPure® lead-free markings on handle and body
Bullet8: Solder end connections
Bullet9: Dezincification resistant
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineer
Height: 1.560
Length: 6.28
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site