Extra Data: Copper-to-copper connections, Full port, Maximum service temperature 250 Degrees F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Multiple handle options, including NIB-Seal®
Disclaimer: NIBCO pecent Press System is a registered trademark of NIBCO INC. Performance Bronze pecent is a registered trademark of NIBCO INC.
Height: 2.840
Length: 10.53
MadeInUSA: Yes
Material: Lead-Free Bronze
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze check valve features solder end connections for ease of installation. Swing check valves may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8QVL
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 366°F/185°C, 300 psi/20.7 bar non-shock cold working pressure, Renewable bronze disc, Y-pattern
AltImageName1: /NBC/S433Y.jpg
AltImageName2: /NBC/S433Y.jpg
AltImagePath1: /NBC-S433Y.JPEG
AltImagePath2: /NBC-S433Y.JPEG
Bullet5: Regrindable seat
Bullet6: Class 150 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-80
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. It features a screw-in bonnet for accessibility to repair or
Height: 2.460
Length: 5.310
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze check valve features solder end connections for ease of installation. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8QWD
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 366°F/185°C, 300 psi/20.7 bar non-shock cold working pressure, Regrindable seat, Renewable PTFE disc
AltImageName1: /NBC/S433Y.jpg
AltImageName2: /NBC/S433Y.jpg
AltImagePath1: /NBC-S433Y.JPEG
AltImagePath2: /NBC-S433Y.JPEG
Bullet5: Class 150 solder end connections
Bullet6: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet7: Conforms to MSS SP-80
Country: USA
Description: The NIBCO bronze large diameter horizontal swing check valve with renewable seat and disc. It features a bolted bonnet for accessibility to repair or replace parts. The swing check valve prevents backflow by automatically closing when fluid reverses direct
Height: 2.180
Length: 4.690
Made to Order: MTO
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Description: Stainless steel metering stations (also known as orifice plates) are used for the measurement of water flows in heating and chilled water circuits in HVAC systems.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Hydro-Core is the ideal solution for near boiler piping or secondary loops. By combining the Webstone Isolator and Ball Drain with closely spaced tees, the Hydro-Core Manifold system eliminates costly field fabrication, avoids precise calculations and simplifies future service. The complete near boiler piping kits are fully-fabricated solutions that are catered to the needs of their chosen boiler. Using the Webstone boiler compatibility matrix, the installer is provided with the NBP kit part number that''''s unique to their boiler model, with pre-cut supply and return lines and boiler-specific connections. Designed for use with water, oil, glycol mix in residential or commercial heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079X54
Width:
Height:
Extra Data: Assembled with Flexible Stainless Steel Tubing, Insulated Manifold, Supply and Return Line, Integrated Connections for Your Specific Boiler, Tubing May be Cut for Installations in Close Quarters
Bullet10: Available in FIP, SWT, PRS x FIP, FIP x SWT, PRS x SWT
Bullet11: Certified to NSF/ANSI 61
Bullet5: Female Threaded Plugged Port for Connection to Other Devices
Bullet6: 1/4 Inch Pressure Gauge Port
Bullet7: Saves 261 Minutes
Bullet8: Replaces 34 Components
Bullet9: Eliminates 29 Leakpaths
Country: China
Description: Hydro-Core Complete Near Boiler Piping Kit, Includes Manifold, Supply and Return Lines and Boiler Connections for Select Wall Hung Boilers
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® Press System is user friendly, quick and easy to install. When properly crimped a unique ''''N'''' witness mark is clearly visible. The lead free HydraPure® Performance Bronze® ball valve is specifically designed for use in systems that deliver water for human consumption. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System applies the proven performance of press technology to NIBCO valves and fittings -- the most specified flow control products in the industry. The NIBCO® Press System features a full range of precision engineered copper fittings, bronze valves, accessories, pressing tools, jaws and chains. NIBCO® Press System valves are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707KZ50
Width:
Height:
Extra Data: Bronze trim blowout-proof stem, Full port, Maximum service temperature 250°F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Lead-free*
Bullet11: Conforms to MSS SP-110
Bullet12: NSF/ANSI/CAN-61
Bullet13: NSF/ANSI/CAN-372
Bullet14: IAPMO/ANSI Z1157
Bullet5: Reinforced PTFE seat rings
Bullet6: Threaded x press female end connections
Bullet7: Press leak-detection feature
Bullet8: Multiple handle options, including NIB-Seal®
Bullet9: Dezincification resistant
Country: USA
Description: The NIBCO Press System ball valve body is manufactured from lead free* HydraPure Performance Bronze alloy and is dezincification resistant. The ball valve is designed with threaded by press-to-connect copper end connections with an inboard bead and EPDM O-
Height: 3.690
Length: 7.450
Low Lead: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8VQL
Width:
Height:
Extra Data: Full port, Max temperature rating 300°F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Solder end connections
Bullet11: Dezincification resistant
Bullet12: Lead-free*
Bullet13: Conforms to MSS SP-110
Bullet14: NSF/ANSI/CAN-61
Bullet15: NSF/ANSI/CAN-372
Bullet16: IAPMO/ANSI Z1157
Bullet5: Stainless steel ball and stem
Bullet6: Vented ball
Bullet7: Blowout-proof stem
Bullet8: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet9: NIBCO® HydraPure® lead-free* markings on handle and body
Country: USA
Description: The NIBCO ball valve is made of lead-free* Silicon Performance Bronze alloy and has achieved the stringent NSF/ANSI/CAN 61 section 8 (Commercial Hot) and NSF/ANSI/CAN 372 listings. The two-piece valve provides bubble-tight shutoff at 600 PSI and is dezinci
Height: 3.540
Length: 9.730
Low Lead: Yes
MadeInUSA: Yes
Minimum Order Quantity: 2.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, residential, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFW68
Width:
Height:
Extra Data: Full port, Max temperature rating 300°F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Threaded end connections
Bullet11: Dezincification resistant
Bullet12: Lead-free*
Bullet13: Conforms to MSS SP-110
Bullet14: NSF/ANSI/CAN-61
Bullet15: NSF/ANSI/CAN-372
Bullet16: IAPMO/ANSI Z1157
Bullet5: Stainless steel ball and stem
Bullet6: Vented ball
Bullet7: Blowout-proof stem
Bullet8: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet9: NIBCO® HydraPure® lead-free* markings on handle and body
Country: USA
Description: The NIBCO ball valve is made of lead-free* Silicon Performance Bronze alloy and has achieved the stringent NSF/ANSI 61 section 8 (Commercial Hot) and NSF/ANSI 372 listings. The two-piece valve provides bubble-tight shutoff at 600 PSI and is dezincification
Height: 3.540
Length: 9.150
Low Lead: Yes
MadeInUSA: Yes
Minimum Order Quantity: 2.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO® FLO-BOSS® Automatic Balancing Valves are constructed with dezincification resistant materials. This unique valve design provides finite control through a wide range of flow cartridges. Please refer to NIBCO technical data sheets and IOM Manuals for engineering and installation information. Whether a system is designed for heating, cooling or water distribution, it must be properly adjusted and balanced for optimum performance. A balanced system ensures a comfortable indoor climate. Choose NIBCO® Coil-Connect® valves, fittings and accessories for the most specified, versatile and economical option in commercial HVAC and mechanical applications. NIBCO® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HQW9G
Width:
Height:
Extra Data: 200 psi non-shock cold working pressure, DZR Brass body and tail pieces, Maximum temperature rating 250°F at 150 psi, Regulating cartridge DZR Brass and Stainless Steel
AltImageName1: /NBC/TPC1880SO.jpg
AltImageName2: /NBC/TPC1880SO.jpg
AltImagePath1: /NBC-TPC1880SO.JPEG
AltImagePath2: /NBC-TPC1880SO.JPEG
Bullet5: EPDM O-rings
Bullet6: Threaded x Press Ends
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: FLO-BOSS® AI
Country: USA
Description: NIBCO FLO-BOSS Automatic Balancing Valves are ideally suited for use in HVAC and other mechanical applications that require a balanced system providing optimum flow. Each valve has 2 integral drilled and tapped ports with PT ports installed, has double uni
Height: 2.910
Length: 13.190
MadeInUSA: Yes
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® swing check valve features a screw-in bonnet for accessibility to repair or replace parts. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8PY9
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Renewable bronze disc, Y-pattern
AltImageName1: /NBC/S413Y.jpg
AltImageName2: /NBC/S413Y.jpg
AltImagePath1: /NBC-S413Y.JPEG
AltImagePath2: /NBC-S413Y.JPEG
Bullet5: Regrindable seat
Bullet6: Class 125 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-80
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. The bronze check valve features solder end connections for ea
Height: 2.410
Length: 5.280
Made to Order: MTO
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site