Extra Data: Full port, Max temperature rating 300 degrees F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Solder end connections
Bullet5: Stainless steel ball and stem
Bullet6: Vented ball
Bullet7: Blowout-proof stem
Bullet8: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet9: NIBCO® HydraPure® lead-free markings on handle and body
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineer
Height: 1.560
Length: 6.28
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Full port, Max temperature rating 300 degrees F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Threaded end connections
Bullet5: Stainless steel ball and stem
Bullet6: Vented ball
Bullet7: Blowout-proof stem
Bullet8: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet9: NIBCO® HydraPure® lead-free markings on handle and body
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engine
Height: 2.250
Length: 4.64
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze check valve features solder end connections for ease of installation. Swing check valves may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8QVH
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 366°F/185°C, 300 psi/20.7 bar non-shock cold working pressure, Renewable bronze disc, Y-pattern
Bullet5: Regrindable seat
Bullet6: Class 150 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Conforms to MSS SP-80
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. It features a screw-in bonnet for accessibility to repair or
Height: 1.730
Length: 3.370
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Full port, Max temperature rating 300 degrees F, Silicon Performance Bronze® body, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Solder end connections
Bullet5: Stainless steel ball and stem
Bullet6: Vented ball
Bullet7: Blowout-proof stem
Bullet8: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet9: NIBCO® HydraPure® lead-free markings on handle and body
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineer
Height: 2.250
Length: 5
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Bronze trim blowout-proof stem, Full port, Maximum service temperature 250 Degrees F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Lead-free
Bullet5: Reinforced PTFE seat rings
Bullet6: Threaded x press female end connections
Bullet7: Press leak-detection feature
Bullet8: Multiple handle options, including NIB-Seal®
Bullet9: Dezincification resistant
Country: USA
Description: The NIBCO Press System is user friendly, quick and easy to install. When properly crimped a unique ''N'' witness mark is clearly visible. The lead free HydraPure Performance Bronze ball valve is specifically designed for use in systems that
Height: 2.460
Length: 8.15
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO dual temperature Home Run Manifold features 40 ports, and is designed for use with NIBCO PEX in potable water and radiant heating systems. The Home Run Manifold dual temperature model features a unique plug that separates hot and cold water flow. Also available with shutoff valves (PH40D-V1 or PH40D-V2).
Item ID: 70HXZHT
Width:
Height:
Extra Data: Lead-Free, Maximum service temperature 200 degrees F, NSF-14, NSF/ANSI/CAN-61
AltImageName1: /NBC/PH40D.jpg
AltImageName2: /NBC/PH40D.jpg
AltImagePath1: /NBC-PH40D.JPEG
AltImagePath2: /NBC-PH40D.JPEG
Bullet5: Complies with ASTM F877
Bullet6: Compatible with ICC
Bullet7: CSA (on valves)
Country: USA
Description: 40-Port Home Run Manifold pecent - Dual Temperature
Disclaimer: Home Run Manifold pecent is a registered trademark of NIBCO INC.
Extra Data: Full port, Max temperature rating 300 degrees F, Silicon Performance Bronze® body, ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Lead-free
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet7: NIBCO® HydraPure® lead-free markings on handle and body
Bullet8: Threaded end connections
Bullet9: Dezincification resistant
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engine
Height: 2.840
Length: 8.88
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO dual temperature Home Run Manifold features 40 ports, and is designed for use with NIBCO PEX in potable water and radiant heating systems. The Home Run Manifold dual temperature model features a unique plug that separates hot and cold water flow. Also available with shutoff valves (PH40D-V1 or PH40D-V2).
Item ID: 70HXZHR
Width:
Height:
Extra Data: Lead-Free, Maximum service temperature 200 degrees F, NSF-14, NSF/ANSI/CAN-61
AltImageName1: /NBC/PH40D.jpg
AltImageName2: /NBC/PH40D.jpg
AltImagePath1: /NBC-PH40D.JPEG
AltImagePath2: /NBC-PH40D.JPEG
Bullet5: Complies with ASTM F877
Bullet6: Compatible with ICC
Bullet7: CSA (on valves)
Country: USA
Description: 40-Port Home Run Manifold pecent - Dual Temperature
Disclaimer: Home Run Manifold pecent is a registered trademark of NIBCO INC.
Extra Data: Full port, Max temperature rating 300 degrees F, Silicon Performance Bronze® body, ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Lead-free
Bullet5: Blowout-proof stem
Bullet6: Standard lever handle, optional NIB-SEAL®, Locking Lever, Memory Stop, Extended Lever, Round and Wing
Bullet7: NIBCO® HydraPure® lead-free markings on handle and body
Bullet8: Solder end connections
Bullet9: Dezincification resistant
Country: USA
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder ends for easy installation. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineer
Height: 2.840
Length: 9.24
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO dual temperature Home Run Manifold features 40 ports, and is designed for use with NIBCO PEX in potable water and radiant heating systems. The Home Run Manifold dual temperature model features a unique plug that separates hot and cold water flow. Also available with shutoff valves (PH40D-V1 or PH40D-V2).
Item ID: 70HXZHU
Width:
Height:
Extra Data: Lead-Free, Maximum service temperature 200 degrees F, NSF-14, NSF/ANSI/CAN-61
AltImageName1: /NBC/PH40D.jpg
AltImageName2: /NBC/PH40D.jpg
AltImagePath1: /NBC-PH40D.JPEG
AltImagePath2: /NBC-PH40D.JPEG
Bullet5: Complies with ASTM F877
Bullet6: Compatible with ICC
Bullet7: CSA (on valves)
Country: USA
Description: 40-Port Home Run Manifold pecent - Dual Temperature
Disclaimer: Home Run Manifold pecent is a registered trademark of NIBCO INC.
Extra Data: Adjustable Temperature Control Limits Output to 120 Degrees F to Prevent Risk of Scalding, Allows Water Heater to be Set at 140 Degrees F or Higher, Minimizing Risk of Legionella Bacteria in the Tank, Integrated Recirculation Port Simplifies Installation, Mixes Hot Output With Cold Supply for Greater Effective Hot Water Storage
Bullet10: Certified to NSF/ANSI 61 And 372
Bullet5: ProPush Flexible Connectors Easily Connect to Copper, CPVC, or PEX
Bullet6: Models available to satisfy all state and federal low-lead laws
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The bronze check valve features threaded end connections for ease of installation. It features a screw in bonnet for accessibility to repair or replace parts. Swing checks may be installed in horizontal positions (or vertical with flow moving up). Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® check valves for the most specified, versatile and economical valve option in commercial, mechanical, fire protection and industrial applications. NIBCO® check valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCXEH
Width:
Height:
Extra Data: 200 psi/13.8 bar non-shock water working pressure (WWP), Regrindable seat, Renewable disc, Y-pattern
AltImageName1: /NBC/KT403W.jpg
AltImageName2: /NBC/KT403W.jpg
AltImagePath1: /NBC-KT403W.JPEG
AltImagePath2: /NBC-KT403W.JPEG
Bullet5: Class 125 threaded end connections
Bullet6: Conforms to MSS SP-80
Country: USA
Description: The NIBCO bronze horizontal swing check valve has a Y-pattern design with renewable Buna-N seat and disc. The swing check valve prevents backflow by automatically closing when fluid reverses direction. The check valve is recommended for fire protection tri
Height: 2.760
Length: 4.480
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1.000
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Extra Data: Bronze trim blowout-proof stem, Full port, Maximum service temperature 250 Degrees F, Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
Bullet10: Lead-free
Bullet5: Reinforced PTFE seat rings
Bullet6: Threaded x press female end connections
Bullet7: Press leak-detection feature
Bullet8: Multiple handle options, including NIB-Seal®
Bullet9: Dezincification resistant
Country: USA
Description: The NIBCO Press System is user friendly, quick and easy to install. When properly crimped a unique ''N'' witness mark is clearly visible. The lead free HydraPure Performance Bronze ball valve is specifically designed for use in systems that
Height: 2.250
Length: 5.03
Low Lead: Yes
MadeInUSA: Yes
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Pressing tools, jaws and chain sets are an integral part of ensuring a reliable, permanent connection between copper piping and NIBCO® Press System® fittings and valves. Use only pressing tools, jaws and chain sets that have been tested and approved for use with NIBCO® Press System® fittings and valves. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO® Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO® Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains.
Item ID: 70HXZKC
Width:
Height:
Extra Data: Creates leak-free connections, No flame, solder or flux, Use with PC-20M or PC-10M press tools
AltImageName1: /NBC/MINIJAW.jpg
AltImageName2: /NBC/MINIJAW.jpg
AltImagePath1: /NBC-MINIJAW.JPEG
AltImagePath2: /NBC-MINIJAW.JPEG
Country: Germany
Description: The NIBCO Press System 1/2-inch mini pressing jaw is intended for use with the PC-20M press tool or the PC-10M press tool. The pressing jaw is installed in the appropriate pressing tool. When the trigger on the pressing tool is depressed a crimp is made, a
Disclaimer: NIBCO Press System pecent is a registered trademark of NIBCO INC.
Item Description
Pressing tools, jaws and chain sets are an integral part of ensuring a reliable, permanent connection between copper piping and NIBCO Press System® fittings and valves. Use only pressing tools, jaws and chain sets that have been tested and approved for use with NIBCO Press System® fittings and valves. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains.
Item ID: 70HXZKE
Width:
Height:
Extra Data: Creates leak-free connections, No flame, solder or flux, Use with PC-20M or PC-10M press tools
AltImageName1: /NBC/MINIJAW.jpg
AltImageName2: /NBC/MINIJAW.jpg
AltImagePath1: /NBC-MINIJAW.JPEG
AltImagePath2: /NBC-MINIJAW.JPEG
Country: Germany
Description: The NIBCO Press System 3/4-inch mini pressing jaw is intended for use with the PC-20M press tool or the PC-10M press tool. The pressing jaw is installed in the appropriate pressing tool. When the trigger on the pressing tool is depressed a crimp is made, a
Disclaimer: NIBCO Press System pecent is a registered trademark of NIBCO INC.
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site